TERMIUM Plus®

The Government of Canada’s terminology and linguistic data bank.

résistance en flexion [13 records]

Record 1 2013-04-18

English

Subject field(s)
  • Scientific Measurements and Analyses
  • Strength of Materials
  • Dentistry
DEF

The strength of a material in bending.

French

Domaine(s)
  • Mesures et analyse (Sciences)
  • Résistance des matériaux
  • Dentisterie

Spanish

Campo(s) temático(s)
  • Medición y análisis (Ciencias)
  • Resistencia de los materiales
  • Odontología
DEF

Máximo esfuerzo de flexión que puede soportar un cuerpo antes de deformarse permanentemente o romperse.

Save record 1

Record 2 2003-10-22

English

Subject field(s)
  • Textiles: Preparation and Processing
  • Engineering Tests and Reliability
DEF

That length of a rectangular strip of material that will bend under its own weight to a specific angle.

French

Domaine(s)
  • Apprêt et traitements divers (Textiles)
  • Fiabilité, contrôle et essais (Ingénierie)

Spanish

Campo(s) temático(s)
  • Preparación y elaboración (Textiles)
  • Fiabilidad y ensayos (Ingeniería)
Save record 2

Record 3 2003-10-05

English

Subject field(s)
  • Equipment (Chemistry)
  • Strength of Materials
  • Microbiology and Parasitology

French

Domaine(s)
  • Équipement (Chimie)
  • Résistance des matériaux
  • Microbiologie et parasitologie

Spanish

Campo(s) temático(s)
  • Equipo (Química)
  • Resistencia de los materiales
  • Microbiología y parasitología
Save record 3

Record 4 2003-05-27

English

Subject field(s)
  • Refractory Materials (Metallurgy)
  • Engineering Tests and Reliability
  • Strength of Materials
OBS

--the nominal transverse breaking stress of a material.

French

Domaine(s)
  • Matériaux réfractaires (Métallurgie)
  • Fiabilité, contrôle et essais (Ingénierie)
  • Résistance des matériaux
OBS

--sollicitation conventionnelle correspondant à la rupture d'une matière soumise à un essai de flexion.

Spanish

Campo(s) temático(s)
  • Materiales refractarios (Metalurgia)
  • Fiabilidad y ensayos (Ingeniería)
  • Resistencia de los materiales
Save record 4

Record 5 2002-07-24

English

Subject field(s)
  • Metrology and Units of Measure
  • General Mechanics (Physics)
  • Bodywork and Framework (Motor Vehicles)
CONT

The standard measurement for frame strength is a term known as "RBM" (Resistance to Bending Movement). The RBM is the yield strength of the frame material multiplied by the section modules of the frame rail. A typical yield strength of steel used in commercial truck chassis is 50,000 psi, and the section modules per frame is 13.3 to 13.4 inches cubed. Therefore, the RBM per rail is approximately 670,000 inch-pounds, with the RBM of the entire chassis frame (both rails) being double that, or 1,340,000 pounds.

CONT

Furthermore, a single frame in lieu of old double frames, such as those found in older dump trucks, saves 300-500 lb. in tare weight but still provides strong resistance to bending movement in the frame, which is essential when operating in a severe construction environment.

CONT

The 2000 Suburban ... modular frame ... Section modulus (in cubic inches) is up from 3.16 to 4.24 and the resistance to bending moment (in pounds/inches) goes from 104,000 to 140,000.

French

Domaine(s)
  • Unités de mesure et métrologie
  • Mécanique générale (Physique)
  • Carrosserie, caisse et châssis (Véhicules automobiles)
CONT

[...] balai de rue automoteur à quatre roues [...] CHASSIS : De type en «C» de 76 mm X 330 mm en acier à haute résistance et à faible teneur en carbone. Module de section : 16,63. Résistance à la flexion : 831,500 lbs/po.

CONT

Le dispositif de protection arrière doit avoir une résistance à la flexion au moins équivalente à celle d'une poutre en acier dont la section droite a un module de résistance à la flexion de 20 cm³.

OBS

flexion : Mécan. Courbure d'une pièce longue (poutre, barre...) sous l'action de forces perpendiculaires à l'axe longitudinal et appliquées en des points où la pièce n'est pas soutenue. Flexion plane. Module de flexion. Résistance à la flexion.

Spanish

Save record 5

Record 6 1999-01-26

English

Subject field(s)
  • General Mechanics (Physics)
  • Building Elements
  • Aircraft Systems
DEF

The maximum stress, or the maximum load, that a beam will withstand without failure in flexure.

French

Domaine(s)
  • Mécanique générale (Physique)
  • Éléments du bâtiment
  • Circuits des aéronefs
DEF

Contrainte ou charge maximale que peut supporter une poutre sans rupture à la flexion.

OBS

Le terme «résistance à la flexion» a été uniformisé au CUTA maintenance.

Spanish

Save record 6

Record 7 1995-02-09

English

Subject field(s)
  • Textiles: Preparation and Processing
  • Engineering Tests and Reliability
CONT

Flex strength is of utmost importance in many industrial materials.

French

Domaine(s)
  • Apprêt et traitements divers (Textiles)
  • Fiabilité, contrôle et essais (Ingénierie)

Spanish

Save record 7

Record 8 1994-09-28

English

Subject field(s)
  • Prostheses

French

Domaine(s)
  • Prothèses

Spanish

Save record 8

Record 9 1994-09-09

English

Subject field(s)
  • Types of Concrete

French

Domaine(s)
  • Sortes de béton

Spanish

Record saved

Record 10 1994-02-16

English

Subject field(s)
  • Air Transport
  • Airport Runways and Areas
OBS

Pavement

French

Domaine(s)
  • Transport aérien
  • Pistes et aires d'aéroport
OBS

Chaussée

Spanish

Campo(s) temático(s)
  • Transporte aéreo
  • Pistas y áreas del aeropuerto
OBS

Pavimento

Save record 10

Record 11 1991-11-22

English

Subject field(s)
  • Strength of Materials

French

Domaine(s)
  • Résistance des matériaux

Spanish

Save record 11

Record 12 1984-02-27

English

Subject field(s)
  • Textiles: Preparation and Processing
CONT

Covering of seat cushions shall be of material having 1.2 kg finished weight, 13.70 mm. width and finished vinyl coating of 1.06 broken twill, or other material with equal flex separation.

French

Domaine(s)
  • Apprêt et traitements divers (Textiles)

Spanish

Save record 12

Record 13 1982-09-27

English

Subject field(s)
  • Aluminum

French

Domaine(s)
  • Aluminium

Spanish

Save record 13

Copyright notice for the TERMIUM Plus® data bank

© Public Services and Procurement Canada, 2024
TERMIUM Plus®, the Government of Canada's terminology and linguistic data bank
A product of the Translation Bureau

Features

Language Portal of Canada

Access a collection of Canadian resources on all aspects of English and French, including quizzes.

Writing tools

The Language Portal’s writing tools have a new look! Easy to consult, they give you access to a wealth of information that will help you write better in English and French.

Glossaries and vocabularies

Access Translation Bureau glossaries and vocabularies.

Date Modified: