TERMIUM Plus^®

Fiche 1,  Justifications,  Anglais

Record number: 1, Textual support number: 1 DEF

A general intellectual ability assumed by some theorists to underline specific mental abilities and talents.  1, fiche 1, Anglais, - g%20factor

Fiche 1,  Justifications,  Français

Fiche 1,  Justifications,  Espagnol

Fiche 2,  Justifications,  Anglais

Record number: 2, Textual support number: 1 CONT

During delignification, there is also a corresponding reduction in pulp viscosity .... If pulp viscosity is allowed to fall below a critical level, the pulp strength drops dramatically. Maintenance of pulp viscosity is the principal reason that the kraft cook must be terminated at a point where a substantial level of residual lignin remains with the fibers. A derivation termed the G-factor (exactly analogous to the H-factor) can be applied for viscosity reduction, i.e., combinations of time and temperature that give the same G-factor can be expected to produce pulp with the same viscosity. Since the G-factor increases more rapidly with temperature than the H-factor, it follows that higher cooking temperatures have a proportionally greater effect on viscosity reduction.  1, fiche 2, Anglais, - G%2Dfactor

Fiche 2,  Justifications,  Français

Fiche 2,  Justifications,  Espagnol

Fiche 3,  Justifications,  Anglais

Record number: 3, Textual support number: 1 CONT

Given the factors of degree days, conductance and air change, it is possible to estimate the winter heat loss for a building. The U value per unit area of the enclosure component, multiplied by the area of each component, multiplied by the area of each component and then summed for all components becomes the total building conductance factor. When the total loss through air change is added, the resulting figure is the complete building heat loss factor(b).  1, fiche 3, Anglais, - complete%20heat%20loss%20factor

Fiche 3,  Justifications,  Français

Fiche 3,  Justifications,  Espagnol