TERMIUM Plus^®

Fiche 1,  Justifications,  Anglais

Record number: 1, Textual support number: 1 CONT

There is a Maximum Adjacent Cut Specification (MACS) that varies from manufacturer to manufacturer. For instance, with a Schlage brand lock the maximum useable difference between two adjacent cuts on a key is 7 depths. This means throwing out many numbers generated randomly, but they're very easy to spot on a printed page.  2, fiche 1, Anglais, - maximum%20adjacent%20specification%20cut

Record number: 1, Textual support number: 1 OBS

Maximum adjacent cut is 5 (example: 1-6 is acceptable, 1-7, 8 or 9 is not) ... Cut depth is measured as root depth from back of key to bottom of cut.  3, fiche 1, Anglais, - maximum%20adjacent%20specification%20cut

Fiche 1,  Justifications,  Français

Fiche 1,  Justifications,  Espagnol