TERMIUM Plus^®

Fiche 1,  Justifications,  Anglais

Record number: 1, Textual support number: 1 DEF

Projection that pushes the ejector assembly back as the mold closes; also called safety pin and position push-back.  5, fiche 1, Anglais, - push%2Dback%20pin

Record number: 1, Textual support number: 1 CONT

There are four push-back pins attached to the four corners of the mold KO [knockout] plate; they are flush with the mold surface when the mold is closed, and move forward with the KO plate. When the mold closes, these pins contact the other side of the mold before the KO pins and force the mold KO plate back to its original position without damaging the tips of the KO pins.  1, fiche 1, Anglais, - push%2Dback%20pin

Record number: 1, Textual support number: 1 OBS

ejector plate return pin: term standardized by ISO.  6, fiche 1, Anglais, - push%2Dback%20pin

Fiche 1,  Justifications,  Français

Record number: 1, Textual support number: 1 OBS

butée de renvoi d'éjecteur : terme normalisé par l'ISO.  2, fiche 1, Français, - but%C3%A9e%20de%20renvoi%20d%27%C3%A9jecteur

Fiche 1,  Justifications,  Espagnol