TERMIUM Plus^®

Fiche 1,  Justifications,  Anglais

Record number: 1, Textual support number: 1 CONT

Several [internal cooling] systems have been developed that incorporate three basic approaches : liquified gas, super-cold air with water vapor, and air exchange methods.... The super-cold air system with water vapor works much the same way [as the liquified gas system]. Here, very dry, subzero blowing air expands the parison. The expanded air is allowed to circulate through the bottle and exhaust. Immediately after the parison has expanded, a fine mist of water is injected into the cold air stream. As it flows, the water mist turns into snow. As the snow circulates through the container, it melts and then vaporizes. At the end of the molding cycle, the water mist is stopped, permitting the circulating air to purge and dry the interior before the mold is opened and the part is removed. Production rates can be improved as much as 50%.  1, fiche 1, Anglais, - super%2Dcold%20air%20system%20with%20water%20vapor

Fiche 1,  Justifications,  Français

Record number: 1, Textual support number: 1 CONT

Le temps de refroidissement devient pratiquement proportionnel au carré de l'épaisseur, c'est pourquoi on a songé à compléter le refroidissement par contact avec l'empreinte par un refroidissement interne selon les différents procédés décrits ci-après. a) Renouvellement de l'air de soufflage. [...] b) Balayage au dioxyde de carbone. [...] c) Procédé ISC (Internal Surface Cooling). Ce procédé breveté, basé sur l'expansion adiabatique, est développé par la Société américaine Hunkar; il consiste à injecter à haute pression (70 bar) un mélange d'air et d'eau, qui, par une brusque détente, va provoquer l'apparition de cristaux de glace sur les parois internes du corps creux. Ces cristaux vont d'abord fondre, libérant l'enthalpie de fusion de la glace. Les gouttelettes vont ensuite s'échauffer puis se vaporiser en absorbant la chaleur du corps creux équivalant à l'enthalpie de vaporisation de l'eau. La réduction du temps de refroidissement par ce procédé peut atteindre 50%. Comme le balayage au CO₂, ce procédé s'avère intéressant pour des corps creux à parois relativement épaisses (plus de 0,5 mm). d) Procédé ALEX. [...]  1, fiche 1, Français, - proc%C3%A9d%C3%A9%20ISC

Fiche 1,  Justifications,  Espagnol

Fiche 2,  Justifications,  Anglais

Record number: 2, Textual support number: 1 CONT

Another process somewhat related to extrusion blow molding is the extrusion/molded neck process. Still used today by Owens-Illinois, this is a proprietary process that traces its roots to glass-blowing technology. It is unique in that the bottle neck finish is injection molded and the bottle body is extrusion blow-molded. In this process, the two halves of a neck finish cavity or neckring are mounted to an actuating head assembly, which intermeshes with the two halves of the blow-mold cavity. The process cycle begins with the main body mold cavity open and the neckring cavity closed. The actuating head assembly moves downward to contact the extrusion die head. When it is in position, extrusion pressure fills the neck section with plastic melt. After it is held for one to two seconds, the head assembly moves upward while, simultaneously, the parison is extruded. When the head assembly reaches the top of its stroke, the blow-mold cavity closes on the parison. The remaining steps of parison pinch-off, blowing, and part removal all follow conventional techniques. Although the production cycle is somewhat slow, the process offers the quality advantage of an accurately molded neck and the process advantage of a parison held at both ends.  1, fiche 2, Anglais, - extrusion%20molded%20neck%20blow%2Dmolding%20process

Fiche 2,  Justifications,  Français

Fiche 2,  Justifications,  Espagnol