TERMIUM Plus®

Par le Bureau de la traduction

Dans les médias sociaux

Consultez la banque de données terminologiques du gouvernement du Canada.

PILOT TECHNIQUE [9 fiches]

Fiche 1 2023-02-28

Anglais

Subject field(s)
  • Aircraft Piloting and Navigation
CONT

Porpoising is [an] oscillation about the aircraft's lateral axis in the manner of a porpoise. A landing porpoise is an oscillation(bouncing) set up between the aircraft's nose and main wheels, and can occur when the nosewheel contacts the runway first, either as a result of excessive landing speed or faulty pilot technique.

OBS

porpoising: designation officially approved by the International Civil Aviation Organization (ICAO).

Français

Domaine(s)
  • Pilotage et navigation aérienne
DEF

Oscillations longitudinales, régulières et de basse fréquence d'un aéronef en vol.

CONT

Le marsouinage est une oscillation autour de l'axe transversal de l'avion, un peu comme le mouvement d'un marsouin dans l'eau. Le marsouinage à l'atterrissage est une oscillation (rebond) entre la roue du train avant et celles du train principal, et il peut se produire lorsque le train avant touche la piste en premier, que ce soit à cause d'une vitesse excessive à l'atterrissage ou d'une mauvaise technique de pilotage.

OBS

marsouinage : désignation uniformisée par l'Organisation de l'aviation civile internationale (OACI) et par le Comité d'uniformisation de la terminologie aéronautique (CUTA) - Opérations aériennes.

OBS

marsouinage : désignation et définition publiées au Journal officiel de la République française le 22 septembre 2000.

Espagnol

Campo(s) temático(s)
  • Pilotaje y navegación aérea
OBS

marsopeo: La Fundación del Español Urgente (Fundéu BBVA), con el asesoramiento de la Real Academia Española, indica que el término "marsopeo" es adecuado como alternativa al anglicismo "porpoising" [...]

OBS

delfineo: designación aceptada oficialmente por la Organización de Aviación Civil Internacional (OACI).

Conserver la fiche 1

Fiche 2 2017-11-03

Anglais

Subject field(s)
  • Medical and Surgical Equipment
CONT

... has updated the chirurgical technique for implantation [of the] Equinoxe platform shoulder system to clarify the proper technique for use of the pilot tip reamers, i. e., to include caution statement that the surgeon should avoid applying a bending force to the pilot tip reamer and should avoid using the reamer to retract the humeral head, as this may result in instrument breakage.

Français

Domaine(s)
  • Équipement médico-chirurgical
CONT

... a mis à jour sa technique chirurgicale d'implantation du système d'épaule plate-forme Equinoxe afin de clarifier la technique à observer pour l'utilisation des alésoirs à pointe pilote : une mise en garde a été ajoutée, stipulant que le chirurgien doit éviter d'appliquer une force de flexion sur l'alésoir à pointe pilote et d'utiliser ce dernier pour rétracter la tête de l'humérus, au risque de briser l'instrument.

Espagnol

Conserver la fiche 2

Fiche 3 2010-04-06

Anglais

Subject field(s)
  • Deep Drilling (Mines)
  • Oil Drilling
CONT

The exploration department at Cogema Resources... recognized the technical difficulties and expense encountered in drilling deep vertical holes. The solution was a technique called navigational drilling(or Navi-drilling) that was used in the oil industry and, less often, in mining.... Simply put, navi-drilling allows operators to begin drilling a new hole 500 to 600 metres below the surface by using a pre-existing "pilot hole. "This significantly reduces costs as the same hole is used for up to six navi-drilling holes. A steerable motor with a rotor system turns a cutting bit. The motor is powered by hydraulic force created by the mixture of water and drilling muds pumped inside the drill string. The fluid is pumped through the motor and returns to the surface at a rate of up to 250 litres per minute. [Followed by an illustration of a schematic cross-section showing navi-drilling holes. ]

CONT

Further deep drilling at Southwest Oyu will await the arrival of navigational drilling equipment, which will allow Ivanhoe to more accurately delineate the deeper portions of the high grade porphyry zone (in excess of one half of a mile deep).

CONT

Newbergh Industries Limited ("Newbergh") has developed and patented a technology which will greatly enhance the steering currently being used in oil and gas field directional drilling. This technology, which is known under the acronym of "HANDS", which stands for Hydraulic Activated Navigational Drilling System, will be incorporated in a so-called benthousing, which will make this piece of equipment remote adjustable whilst drilling for the first time. Its implication will improve drilling performance in terms of speed as well as quality and will result in considerable cost savings for the oil companies and savings in energy to drill the bore holes.

CONT

As underground development proceeds to production levels, a return air raise (RAR) will be installed approximately 270 metres north west of the Hart Shaft and allow the Hart Shaft to revert to a second fresh air intake source. The site for the RAR, which will probably be 4.0 metres in diameter, has been confirmed following vertical navi drilling and the use of a RAAX digital imaging borehole camera to geotechnically assess the insitu ground conditions.

CONT

Directional Drilling Training. Navigation Drilling Training.

Français

Domaine(s)
  • Sondage profond (Mines)
  • Forage des puits de pétrole
OBS

Forage multidirectionnel réalisé à partir d'un trou pilote.

OBS

forage multibranche : proposition d'un ingénieur, Institut français du pétrole; nous avons trouvé l'expression «puits multibranche» dans un site Internet (justification reproduite ci-après).

OBS

forage en faisceaux : proposition faite à partir de l'expression «faisceaux de pipelines» relevée dans un site Internet (justification reproduite ci-après); approuvée par l'Institut français du pétrole, nov. 2002.

OBS

navigationnel : Néologisme proposé à partir des attestations que l'on trouve dans le domaine de la télématique, où il est défini comme suit : «Caractéristique des systèmes qui permettent la navigation à travers les informations, c'est-à-dire de passer de l'une à l'autre directement». Cela n'est pas très parlant pour qualifier un forage, mais son pendant anglais ne l'est guère plus. Sous toutes réserves.

OBS

forage multilatéral : proposition de M. Stéphane Ménand, du Centre de géotechnique et d'exploitation du sous-sol, de l'École des mines de Paris. Nous hésitons cependant à recommander son emploi, étant donné que l'adjectif «multilatéral» n'est attesté que dans les domaines de l'économie et de la politique, pour désigner ce qui concerne les rapports entre des États. Nous pensons que «multibranche» ou «en faisceaux» sont préférables. (nov. 2002)

OBS

[...] l'expérimentation de puits multibranche, permettant de réaliser des extensions latérales dans des puits existants [...]

OBS

Notre société a construit plus de 1200 traversées par la méthode brevetée du Forage Horizontal Dirigé, dans toutes les parties du monde. [...] À ses débuts, le forage directionnel horizontal se limitait aux sols alluvionnaires tels que sable, limon et argile. Finalement, à la demande de ses clients, ses applications se sont étendues aux terrains rocheux. [...] Une autre application attractive du forage directionnel est l'installation de nombreux pipelines sur un parcours de forage commun. L'avantage principal des faisceaux de pipelines est la possibilité pour le client de limiter la quantité de droits de passage en dessous d'une voie d'eau ou d'un autre obstacle. HDI a fixé le standard pour des faisceaux de pipelines grâce à des installations dans le monde entier plus nombreuses que celles réalisés par les autres entreprises de forage directionnel. Les principales réalisations d'installations de faisceaux comprennent l'installation d'un faisceau de douze pipelines de 150 mm de diamètre sous la rivière Peene en Allemagne et de quatre pipelines de 300 mm de diamètre au-dessous du Mississippi aux États Unis.

Espagnol

Conserver la fiche 3

Fiche 4 2002-07-31

Anglais

Subject field(s)
  • Welding - Various Processes
CONT

The conventional method for starting such a weld was to drill a pilot hole to serve as the initial keyhole, carefully align the welding torch over the pilot hole, adjust the standoff distance, and then turn on the torch at full power.... The new starting technique does not depend on precise manual alignment. The welding torch is positioned with no more than the usual care. As the torch begins to move along the weld, the welding current is gradually increased toward the full operating level, causing the depth of the weld to increase gradually until the keyhole is formed.... The standoff is controlled by the automatic-voltage-control portion of the welding equipment. At the end of a circumferential weld, the torch can continue a short distance past the starting point to overlap and thereby complete the weld in the starting transition region.

Français

Domaine(s)
  • Procédés de soudage divers
OBS

Voir la fiche soudage par trou de serrure.

Espagnol

Conserver la fiche 4

Fiche 5 2001-08-29

Anglais

Subject field(s)
  • Chemical Engineering
  • Wood Products
DEF

A type of lignocellulosics fractionation steam treatment which is based on a thermomechanical approach.

CONT

Thermomechanical steam treatment(TM-V). The defibrillation is accomplished by a short time steam treatment followed by a flash decompression. This process was patented by Mason(1928) and has constituted the technological basis for the production of a wide range of fiberboards. In the 1970's, the potential of this technique as a defibration and fractionation process was fully realized. Pilot and industrial installations derived from this technology are known under the generic name of "steam explosion methods"... The TM-V processes literally force the destructuring and eventual disintegration of the lignocellulosic wall structure. The hemicelluloses and a small part of the lignin can be extracted by hot water washing. The residue of this operation can be further extracted with an alkaline solution or with organic solvents in order to solubilize the lignin which can then be recovered by precipitation. Cellulose is obtained as the solid residue after the lignin extraction.

Français

Domaine(s)
  • Génie chimique
  • Produits du bois
DEF

Procédé de fractionnement des matières lignocellulosiques à l'aide d'un traitement à la vapeur.

CONT

Traitement thermomécanique à la vapeur (TM-V). La défibration est accomplie par un traitement de courte durée, en présence de vapeur, et suivie d'une décompression flash. En fait, ce procédé a été mis au point par Mason (1931) et a constitué la technologie de base pour la fabrication d'une vaste gamme de panneaux agglomérés. Au cours des années 70, le potentiel de cette technique comme moyen de défibrer et de fractionner a été réalisé. Des installations pilotes et industrielles issues de cette technologie sont connues sous le nom générique de «méthodes explosives à la vapeur» [...]. Les procédés TM-V forcent la désagrégation des matières lignocellulosiques. Par lavage à l'eau, les hémicelluloses et une partie de la lignine sont solubilisées. Le résidu de ce lavage peut être extrait par la suite avec une solution alcaline ou avec des solvants organiques, afin de solubiliser la lignine, qui est ensuite précipitée et récupérée. La cellulose est obtenue comme le résidu solide provenant de l'extraction de la lignine.

Terme(s)-clé(s)
  • traitement thermo-mécanique à la vapeur

Espagnol

Conserver la fiche 5

Fiche 6 2000-10-25

Anglais

Subject field(s)
  • Engineering Tests and Reliability
OBS

pilot : serving on a small scale as a guiding or tracing device... or as a trial unit in experimenting or in testing apparatus, or in checking technique...

Terme(s)-clé(s)
  • pilot run

Français

Domaine(s)
  • Fiabilité, contrôle et essais (Ingénierie)
CONT

Quand fait-on un essai-pilote? Chaque fois qu'un produit est nouveau ou qu'un appareil ménager vient d'être réalisé, il est absolument nécessaire de l'éprouver avant son lancement.

Espagnol

Conserver la fiche 6

Fiche 7 2000-06-30

Anglais

Subject field(s)
  • Aircraft Piloting and Navigation
CONT

According to the pilot's statement, the aircraft ballooned on touchdown due to an excessive approach airspeed and the nose wheel came down hard on the second runway contact. After a short stop... the pilot departed on a flight to Las Vegas... After arrival... the pilot discovered the damage to the nose gear strut and firewall during a routine postflight inspection... Probable cause : the pilot's use of an excessive approach airspeed and an improper bounced landing recovery technique.

Français

Domaine(s)
  • Pilotage et navigation aérienne
OBS

«T'as vu la jauge?» Bon d'accord, on a dû abuser! C'est pas grave, ça sera un encadrement, avec un atterrissage sans même un soupçon de rebond.

Espagnol

Campo(s) temático(s)
  • Pilotaje y navegación aérea
Conserver la fiche 7

Fiche 8 2000-04-28

Anglais

Subject field(s)
  • Aircraft Piloting and Navigation
CONT

According to the pilot's statement, the aircraft ballooned on touchdown due to an excessive approach airspeed and the nose wheel came down hard on the second runway contact. After a short stop... the pilot departed on a flight to Las Vegas... After arrival... the pilot discovered the damage to the nose gear strut and firewall during a routine postflight inspection... Probable cause : the pilot's use of an excessive approach airspeed and an improper bounced landing recovery technique.

CONT

After this accident ... Fed EX developed a tail strike awareness training program that included bounced landing recovery in its simulator training. That program limited pitch altitude to 7-½ deg for recovery from a bounced landing.

Français

Domaine(s)
  • Pilotage et navigation aérienne
OBS

bounced landing / rebondissement à l'atterrissage.

OBS

«T'as vu la jauge?» Bon d'accord, on a dû abuser! C'est pas grave, ça sera un encadrement, avec un atterrissage sans même un soupçon de rebond.

Espagnol

Conserver la fiche 8

Fiche 9 2000-04-28

Anglais

Subject field(s)
  • Aircraft Piloting and Navigation
CONT

According to the pilot's statement, the aircraft ballooned on touchdown due to an excessive approach airspeed and the nose wheel came down hard on the second runway contact. After a short stop... the pilot departed on a flight to Las Vegas... After arrival... the pilot discovered the damage to the nose gear strut and firewall during a routine postflight inspection... Probable cause : the pilot's use of an excessive approach airspeed and an improper bounced landing recovery technique.

OBS

See record "bounced landing recovery."

Français

Domaine(s)
  • Pilotage et navigation aérienne
OBS

bounced landing / rebondissement à l'atterrissage.

OBS

«T'as vu la jauge?» Bon d'accord, on a dû abuser! C'est pas grave, ça sera un encadrement, avec un atterrissage sans même un soupçon de rebond.

OBS

Voir la fiche «rattrapage d'un rebondissement à l'atterrissage».

Espagnol

Conserver la fiche 9

Avis de droit d’auteur pour la banque de données TERMIUM Plus®

© Services publics et Approvisionnement Canada, 2026
TERMIUM Plus®, la banque de données terminologiques et linguistiques du gouvernement du Canada
Un produit du Bureau de la traduction

En vedette

GCtraduction (accessible uniquement sur le réseau du gouvernement du Canada)

Utilisez ce prototype d’intelligence artificielle pour traduire le contenu du gouvernement du Canada jusqu’au niveau Protégé B inclusivement. Réservé au personnel de certains ministères et organismes.

Outils d'aide à la rédaction

Les outils d’aide à la rédaction du Portail linguistique ont fait peau neuve! Faciles à consulter, ils vous donnent accès à une foule de renseignements utiles pour mieux écrire en français et en anglais.

Lexiques et vocabulaires

Accédez aux lexiques et vocabulaires du Bureau de la traduction.

Date de modification :