TERMIUM Plus®

Par le Bureau de la traduction

Dans les médias sociaux

Consultez la banque de données terminologiques du gouvernement du Canada.

THROUGH TRANSMISSION LOSS [6 fiches]

Fiche 1 2012-07-16

Anglais

Subject field(s)
  • Pipes and Fittings
CONT

Duct lining or wrapping - A duct lining or wrapping is usually a sheet of porous material placed on the inner or outer wall(s) of a duct to introduce sound attenuation and heat insulation. It is often used in air conditioning systems. Linings are more effective in attenuating sound that travels inside along the length of a duct, while wrappings are more effective in preventing sound from being radiated from the duct sidewalls into surrounding spaces

CONT

Lagging, pipe wrapping. Pipes and large ducts often transmit and radiate unwanted noise from pumps, valves, fans, and other equipment into quiet areas through which they pass. The sound transmission loss of the wall can be increased by the addition of lagging or a jacket including sound absorptive material covered by a heavy, solid, impervious skin of plaster, cement, metal, or mass-loaded vinyl.

Français

Domaine(s)
  • Tuyauterie et raccords
OBS

Contre la gelée, [les moyens de protection] consistent quelquefois à entretenir un faible écoulement [...] mais les moyens les plus courants et les plus sûrs sont encore : [...] d'enrober les tuyaux avec une matière isolante contre les déperditions de chaleur par conductibilité, convection ou rayonnement [...]

Espagnol

Conserver la fiche 1

Fiche 2 2011-05-18

Anglais

Subject field(s)
  • Building Insulation and Acoustical Design
DEF

A ceiling covered with or built of material with special acoustical properties.

CONT

The sound transmission loss through an acoustical ceiling... when the ceiling is used as a continuous membrane is often an important rating.

Français

Domaine(s)
  • Isolation et acoustique architecturale
DEF

Plafond en général suspendu, dont les panneaux formant parement sont constitués d'éléments absorbants phoniques, soit par la nature fibreuse du matériau qui les compose, soit par leurs perforations étudiées pour jouer le rôle de pièges à sons.

Espagnol

Conserver la fiche 2

Fiche 3 2009-08-26

Anglais

Subject field(s)
  • Scientific Instruments
CONT

The analytical electron microscope(AEM) is based on a conventional 200 keV transmission electron microscope(TEM) which has been augmented to include the functions of a scanning transmission electron microscope(STEM) and the scanning electron microscope(SEM). Since the electrons must penetrate through the specimen, the specimen dimensions must be no greater than 1 micrometer thick, and preferably in the range of 100 nm. Bulk specimens may be thinned to this range by a combination of mechanical, chemical, and ion sputtering techniques, all of which are available in the microanalysis laboratory. As an imaging tool, the AEM is capable of 0. 3 nm spatial resolution in the TEM mode, 1 nm resolution in the STEM mode, and 3 nm resolution in the SEM mode. Elemental microanalysis is carried out by means of energy dispersive x-ray spectrometry(EDS) and electron energy loss spectrometry(EELS), which together provide sensitivity to all elements with atomic number > 2. Quantitative analysis is carried out by means of a relative sensitivity factor method based on glass, mineral, and metal alloy standards.

Français

Domaine(s)
  • Instruments scientifiques
CONT

Le Centre [London Centre for Nanotechnology (ou LCN]), abritera 200 m² de salles blanches ainsi qu'une gamme complète d'outils de caractérisation à l'échelle nanométrique. Un de ces outils sera un puissant microscope électronique analytique (ou AEM pour «Analytical Electron Microscope») d'une résolution de 1,4. Selon «Imperial College», il n'existe que trois microscopes de ce type au monde (Europe et Etats-Unis). Ses capacités d'analyse des matériaux donneront des informations sur la composition locale, les liaisons et l'état électronique des atomes. Les chercheurs du LCN espèrent que cet outil leur permettra de pénétrer les relations complexes qui existent entre l'arrangement atomique d'un matériau et les propriétés et les performances d'un dispositif fabriqué à partir de celui-ci. Les projets de recherche menés grâce à ce microscope concerneront les piles à combustible, les nanostructures magnétiques, les revêtements intelligents, les points quantiques semiconducteurs et la recherche biomédicale.

Espagnol

Conserver la fiche 3

Fiche 4 2007-04-27

Anglais

Subject field(s)
  • Plastic Materials
  • Vegetable Crop Production
CONT

Greenhouse plastics affect tomato pollination by influencing bee activity and bee loss through the ventilation systems. There is a significant difference in bee loss among plastic types.... CT plastic, one of the less commonly used greenhouse plastics, experienced less bee loss than AT Duratherm, Patilux, and both AT Bee Poly and De Klerk together.... The likely explanation for these results is that under CT plastic, bees are less able to visually detect the open vents because of the relatively small contrast between the transmitted light and the light through the vents. Our spectrophotometry results... indicate that of the plastics tested, only CT plastic allows transmission of UV light. Because of this, fewer bees fly out of these greenhouses and die during the winter months.

OBS

Greenhouse tomatoes and pollination by bumblebees. ... Bumble bee keeping in greenhouses has encountered some problems because of the escape of the bees ... through open vents in late winter and early spring. ... New understandings in insect colour vision (Backhaus 1993) have suggested ways by which the visual target of the open vents (daylight with UV) ... versus the greenhouse roof and walls (attenuated UV) can be disguised by coloured transparent flaps or blocked by screening so that the bees are not attracted and can not escape. The former would be easier and cheaper. UV light encourages the germination of spores of grey mould (Botrytis), so UV opaque plastics are favoured.

Français

Domaine(s)
  • Matières plastiques
  • Production légumière
CONT

Plastique de serre : contribution des matériaux plastiques à la maîtrise du microclimat.

Espagnol

Campo(s) temático(s)
  • Materiales plásticos
  • Producción hortícola
Conserver la fiche 4

Fiche 5 2003-06-02

Anglais

Subject field(s)
  • Plastic Materials
  • Optics
  • Beekeeping
  • Vegetable Crop Production
CONT

Greenhouse plastics effect tomato pollination by influencing bee activity and bee loss through the ventilation systems. There is a significant difference in bee loss among plastic types.... CT plastic, one of the less commonly used greenhouse plastics, experienced less bee loss than AT Duratherm, Patilux, and both AT Bee Poly and De Klerk together.... The likely explanation for these results is that under CT plastic, bees are less able to visually detect the open vents because of the relatively small contrast between the transmitted light and the light through the vents. Our spectrophotometry results... indicate that of the plastics tested, only CT plastic allows transmission of UV light. Because of this, fewer bees fly out of these greenhouses and die during the winter months.

OBS

Greenhouse tomatoes and pollination by bumblebees. ... Bumble bee keeping in greenhouses has encountered some problems because of the escape of the bees ... through open vents in late winter and early spring. ... New understandings in insect colour vision (Backhaus 1993) have suggested ways by which the visual target of the open vents (daylight with UV) ... versus the greenhouse roof and walls (attenuated UV) can be disguised by coloured transparent flaps or blocked by screening so that the bees are not attracted and can not escape. The former would be easier and cheaper. UV light encourages the germination of spores of grey mould (Botrytis), so UV opaque plastics are favoured.

Terme(s)-clé(s)
  • colored transparent plastic

Français

Domaine(s)
  • Matières plastiques
  • Optique
  • Élevage des abeilles
  • Production légumière

Espagnol

Conserver la fiche 5

Fiche 6 1997-11-27

Anglais

Subject field(s)
  • IT Security
DEF

A device to pass information between two systems in only one direction. It is used to interconnect two systems holding data of differing security levels, such that information from one(the low system) can pass freely to the other(the high system), but not vice versa. However, this means that the high system cannot request either a pause in transmission, or retransmission of data. The regulator is therefore switchable to operate either as a strict one way regulator(called overflow mode, since data may be lost through overflow), or in a mode permitting limited feedback to prevent data loss(disable mode).

Terme(s)-clé(s)
  • one-way regulator

Français

Domaine(s)
  • Sécurité des TI

Espagnol

Conserver la fiche 6

Avis de droit d’auteur pour la banque de données TERMIUM Plus®

© Services publics et Approvisionnement Canada, 2026
TERMIUM Plus®, la banque de données terminologiques et linguistiques du gouvernement du Canada
Un produit du Bureau de la traduction

En vedette

GCtraduction (accessible uniquement sur le réseau du gouvernement du Canada)

Utilisez ce prototype d’intelligence artificielle pour traduire le contenu du gouvernement du Canada jusqu’au niveau Protégé B inclusivement. Réservé au personnel de certains ministères et organismes.

Outils d'aide à la rédaction

Les outils d’aide à la rédaction du Portail linguistique ont fait peau neuve! Faciles à consulter, ils vous donnent accès à une foule de renseignements utiles pour mieux écrire en français et en anglais.

Lexiques et vocabulaires

Accédez aux lexiques et vocabulaires du Bureau de la traduction.

Date de modification :