TERMIUM Plus®
Par le Bureau de la traduction
Dans les médias sociaux
Consultez la banque de données terminologiques du gouvernement du Canada.
VACUUM RESISTANCE [6 fiches]
Fiche 1 - données d’organisme interne 2011-11-15
Fiche 1, Anglais
Fiche 1, Subject field(s)
- Building Insulation and Acoustical Design
- Thermal Insulation
Fiche 1, La vedette principale, Anglais
- cork insulation
1, fiche 1, Anglais, cork%20insulation
correct, uniformisé
Fiche 1, Les abréviations, Anglais
Fiche 1, Les synonymes, Anglais
Fiche 1, Justifications, Anglais
Record number: 1, Textual support number: 1 CONT
Cork Insulation. Cork is the outer bark of an oak tree that flourishes only in the area surrounding the western Mediterranean Sea. Instead of being fibrous in structure, the bark of the cork oak is composed of tiny cells, so small that there are 200 million of them to every cubic inch of cork bark. These tiny cells give cork a high resistance to the passage of heat. Each cell is filled with still air, and next to a vacuum, still air is the best insulation known. Because the cells are so tiny, no convection currents in the air can be established to reduce its insulation properties. The cellular structure gives the material its high degree of natural moisture resistance. Each tiny cork cell is a perfect geometric shape, having 14 sides. The volume of cork includes more than 75% air. Its thermal conductivity is 0. 26 Btu per square foot per hour per degree temperature difference at 60 degrees F.(metric), and 0. 30 Btu per square foot per degree temperature difference at 180 degrees F(metric). 2, fiche 1, Anglais, - cork%20insulation
Record number: 1, Textual support number: 1 OBS
cork insulation: term officially approved by the Lexicon Project Committee (New Brunswick). 3, fiche 1, Anglais, - cork%20insulation
Fiche 1, Français
Fiche 1, Domaine(s)
- Isolation et acoustique architecturale
- Isolation thermique
Fiche 1, La vedette principale, Français
- isolant de liège
1, fiche 1, Français, isolant%20de%20li%C3%A8ge
correct, nom masculin, uniformisé
Fiche 1, Les abréviations, Français
Fiche 1, Les synonymes, Français
Fiche 1, Justifications, Français
Record number: 1, Textual support number: 1 OBS
Les isolants peuvent être classés, selon leur origine, en 3 catégories : 1er les matériaux d'origine minérale [...]; 2e les matériaux d'origine végétale (liège, balsa, paille, varech); 3e les matériaux plastiques alvéolaires [...] 2, fiche 1, Français, - isolant%20de%20li%C3%A8ge
Record number: 1, Textual support number: 2 OBS
Le tronc du chêne-liège est recouvert d'une écorce épaisse, récoltée pour fabriquer des bouchons ou des matériaux isolants. 3, fiche 1, Français, - isolant%20de%20li%C3%A8ge
Record number: 1, Textual support number: 3 OBS
Cahier Enviroguide chlore, chap. 4.1.4. 4, fiche 1, Français, - isolant%20de%20li%C3%A8ge
Record number: 1, Textual support number: 4 OBS
isolant de liège : terme uniformisé par le Comité du projet de lexiques (Nouveau-Brunswick). 5, fiche 1, Français, - isolant%20de%20li%C3%A8ge
Fiche 1, Espagnol
Fiche 1, Justifications, Espagnol
Fiche 2 - données d’organisme interne 2010-07-22
Fiche 2, Anglais
Fiche 2, Subject field(s)
- Pumps
- Heating
Fiche 2, La vedette principale, Anglais
- vacuum pump
1, fiche 2, Anglais, vacuum%20pump
correct
Fiche 2, Les abréviations, Anglais
Fiche 2, Les synonymes, Anglais
- vacuum heating pump 2, fiche 2, Anglais, vacuum%20heating%20pump
- vacuum return pump 3, fiche 2, Anglais, vacuum%20return%20pump
Fiche 2, Justifications, Anglais
Record number: 2, Textual support number: 1 DEF
A pump for exhausting air [or steam] or other as from an enclosed space to a desired degree of vacuum. 4, fiche 2, Anglais, - vacuum%20pump
Record number: 2, Textual support number: 1 CONT
These same basic components may be used in the design of a vacuum or a subatmospheric system. The vacuum heating pump maintains a vacuum in the return piping under all operating conditions, assisting the supply steam in overcoming the resistance of the system piping and assuring rapid and uniform steam distribution. 2, fiche 2, Anglais, - vacuum%20pump
Record number: 2, Textual support number: 2 CONT
Vacuum pumps are used on a system where the returns are under a vacuum. The assembly consists of a receiver, separating tank and automatic controls for discharging the condensate to the boiler. Vacuum pumps are sized in the same manner as condensate pumps for a delivery of 2.5 to 3 times the design condensing rate. 2, fiche 2, Anglais, - vacuum%20pump
Fiche 2, Français
Fiche 2, Domaine(s)
- Pompes
- Chauffage
Fiche 2, La vedette principale, Français
- pompe à vide
1, fiche 2, Français, pompe%20%C3%A0%20vide
correct, nom féminin
Fiche 2, Les abréviations, Français
Fiche 2, Les synonymes, Français
Fiche 2, Justifications, Français
Record number: 2, Textual support number: 1 CONT
Chauffage à pression sous-atmosphérique. [...] Les pompes à vide sont de deux sortes : 1. les pompes à piston, activées par la vapeur, aspirantes et foulantes, et, 2. les pompes centrifuges accouplées directement à un moteur électrique. 2, fiche 2, Français, - pompe%20%C3%A0%20vide
Record number: 2, Textual support number: 2 CONT
Chauffage à vapeur sous vide. Une pompe à vide permet d'obtenir dans l'installation une pression inférieure à la pression atmosphérique [...] Le vide est parfois réalisé à l'aide d'une pompe refoulant l'eau condensée dans la chaudière et munie d'un système d'injecteurs appropriés [...] 3, fiche 2, Français, - pompe%20%C3%A0%20vide
Record number: 2, Textual support number: 3 CONT
Pour les grands édifices [...] il est difficile de placer tous les échangeurs de chaleur au-dessus du niveau d'eau du générateur ou de la tuyauterie de retour. On utilise dans ce cas une pompe à vide qui maintient une pression inférieure à la pression atmosphérique (jusqu'à 650 mm de Hg) dans la tuyauterie générale de retour [...] 4, fiche 2, Français, - pompe%20%C3%A0%20vide
Fiche 2, Espagnol
Fiche 2, Justifications, Espagnol
Fiche 3 - données d’organisme interne 2008-02-04
Fiche 3, Anglais
Fiche 3, Subject field(s)
- Strength of Materials
- Pipes and Fittings
- Plastic Materials
- Manufactured Products (Rubber)
Fiche 3, La vedette principale, Anglais
- vacuum test
1, fiche 3, Anglais, vacuum%20test
correct, normalisé
Fiche 3, Les abréviations, Anglais
Fiche 3, Les synonymes, Anglais
Fiche 3, Justifications, Anglais
Record number: 3, Textual support number: 1 DEF
The test of the resistance of a hose to collapse under vacuum, or to check the integrity of the bond between hose layers. [Definition standardized by ISO. ] 1, fiche 3, Anglais, - vacuum%20test
Record number: 3, Textual support number: 1 OBS
vacuum test: term standardized by ISO. 2, fiche 3, Anglais, - vacuum%20test
Fiche 3, Français
Fiche 3, Domaine(s)
- Résistance des matériaux
- Tuyauterie et raccords
- Matières plastiques
- Produits fabriqués (Caoutchouc)
Fiche 3, La vedette principale, Français
- essai sous vide
1, fiche 3, Français, essai%20sous%20vide
correct, nom masculin, normalisé
Fiche 3, Les abréviations, Français
Fiche 3, Les synonymes, Français
Fiche 3, Justifications, Français
Record number: 3, Textual support number: 1 DEF
Essai de résistance d'un tuyau à l'aplatissement sous vide ou de contrôle de la qualité de la liaison entre les couches du tuyau. [Définition normalisée par l'ISO.] 1, fiche 3, Français, - essai%20sous%20vide
Record number: 3, Textual support number: 1 OBS
essai sous vide : terme normalisé par l'ISO. 2, fiche 3, Français, - essai%20sous%20vide
Fiche 3, Espagnol
Fiche 3, Justifications, Espagnol
Fiche 4 - données d’organisme interne 2008-02-04
Fiche 4, Anglais
Fiche 4, Subject field(s)
- Strength of Materials
- Pipes and Fittings
- Plastic Materials
- Manufactured Products (Rubber)
Fiche 4, La vedette principale, Anglais
- vacuum resistance
1, fiche 4, Anglais, vacuum%20resistance
correct, normalisé
Fiche 4, Les abréviations, Anglais
Fiche 4, Les synonymes, Anglais
- resistance to vacuum 1, fiche 4, Anglais, resistance%20to%20vacuum
correct, normalisé
Fiche 4, Justifications, Anglais
Record number: 4, Textual support number: 1 DEF
The ability to withstand a specified vacuum in the bore without collapse or delamination of the lining or separation between hose layers. [Definition standardized by ISO.] 1, fiche 4, Anglais, - vacuum%20resistance
Record number: 4, Textual support number: 1 OBS
vacuum resistance; resistance to vacuum : terms standardized by ISO. 2, fiche 4, Anglais, - vacuum%20resistance
Fiche 4, Français
Fiche 4, Domaine(s)
- Résistance des matériaux
- Tuyauterie et raccords
- Matières plastiques
- Produits fabriqués (Caoutchouc)
Fiche 4, La vedette principale, Français
- résistance sous vide
1, fiche 4, Français, r%C3%A9sistance%20sous%20vide
correct, nom féminin, normalisé
Fiche 4, Les abréviations, Français
Fiche 4, Les synonymes, Français
- résistance au vide 1, fiche 4, Français, r%C3%A9sistance%20au%20vide
correct, nom féminin, normalisé
Fiche 4, Justifications, Français
Record number: 4, Textual support number: 1 DEF
Capacité à supporter un vide spécifié dans l'alésage sans aplatissement ni délamination du tube intérieur ni séparation des couches du tuyau. [Définition normalisée par l'ISO.] 1, fiche 4, Français, - r%C3%A9sistance%20sous%20vide
Record number: 4, Textual support number: 1 OBS
résistance sous vide; résistance au vide : termes normalisés par l'ISO. 2, fiche 4, Français, - r%C3%A9sistance%20sous%20vide
Fiche 4, Espagnol
Fiche 4, Justifications, Espagnol
Fiche 5 - données d’organisme interne 2006-05-10
Fiche 5, Anglais
Fiche 5, Subject field(s)
- Lighting
Fiche 5, La vedette principale, Anglais
- solid-state lighting
1, fiche 5, Anglais, solid%2Dstate%20lighting
correct
Fiche 5, Les abréviations, Anglais
- SSL 1, fiche 5, Anglais, SSL
correct
Fiche 5, Les synonymes, Anglais
- solid state lighting 2, fiche 5, Anglais, solid%20state%20lighting
correct
Fiche 5, Justifications, Anglais
Record number: 5, Textual support number: 1 DEF
A type of lighting that utilizes light-emitting diodes (LEDs), organic light-emitting diodes (OLEDs), or polymer light-emitting diodes as sources of illumination rather than electrical filaments or gas. 3, fiche 5, Anglais, - solid%2Dstate%20lighting
Record number: 5, Textual support number: 1 OBS
The term "solid state" refers to the fact that light in an LED is emitted from a solid object(a block of semiconductor) rather than from a vacuum or gas tube, as is the case in traditional incandescent light bulbs and fluorescent lamps. Unlike traditional lighting, however, SSL creates visible light with virtually no heat or parasitic energy dissipation. In addition, its solid-state nature provides for greater resistance to shock, vibration, and wear, thereby increasing its lifespan significantly. 3, fiche 5, Anglais, - solid%2Dstate%20lighting
Fiche 5, Français
Fiche 5, Domaine(s)
- Éclairage
Fiche 5, La vedette principale, Français
- éclairage à semi-conducteurs
1, fiche 5, Français, %C3%A9clairage%20%C3%A0%20semi%2Dconducteurs
correct, nom masculin
Fiche 5, Les abréviations, Français
Fiche 5, Les synonymes, Français
- éclairage à semiconducteurs 2, fiche 5, Français, %C3%A9clairage%20%C3%A0%20semiconducteurs
correct, nom masculin
- éclairage par semiconducteurs 3, fiche 5, Français, %C3%A9clairage%20par%20semiconducteurs
nom masculin
Fiche 5, Justifications, Français
Record number: 5, Textual support number: 1 CONT
Les systèmes d'éclairage à semiconducteurs de Philips procurent les multiples avantages propres à la mise en lumière au moyen de diodes électroluminescentes, notamment une très longue durée de vie, un entretien extrêmement réduit et pratiquement 100 % de fiabilité. 2, fiche 5, Français, - %C3%A9clairage%20%C3%A0%20semi%2Dconducteurs
Fiche 5, Terme(s)-clé(s)
- éclairage par semi-conducteurs
Fiche 5, Espagnol
Fiche 5, Justifications, Espagnol
Fiche 6 - données d’organisme externe 2002-04-03
Fiche 6, Anglais
Fiche 6, Subject field(s)
- Furnaces and Ovens (Metallurgy)
- Compartment - Canadian Nuclear Safety Commission
Fiche 6, La vedette principale, Anglais
- vacuum induction furnace 1, fiche 6, Anglais, vacuum%20induction%20furnace
Fiche 6, Les abréviations, Anglais
Fiche 6, Les synonymes, Anglais
Fiche 6, Justifications, Anglais
Record number: 6, Textual support number: 1 OBS
Vacuum-melting techniques are employed in the case of some steels to obtain improved physical and mechanical properties which cannot be obtained by any other means... Vacuum furnaces are heated by electrical induction, the electric-arc principle, electrical resistance, and by gas. 2, fiche 6, Anglais, - vacuum%20induction%20furnace
Fiche 6, Français
Fiche 6, Domaine(s)
- Fours (Métallurgie)
- Tiroir - Commission canadienne de sûreté nucléaire
Fiche 6, La vedette principale, Français
- four à induction sous vide
1, fiche 6, Français, four%20%C3%A0%20induction%20sous%20vide
correct, nom masculin
Fiche 6, Les abréviations, Français
Fiche 6, Les synonymes, Français
Fiche 6, Justifications, Français
Record number: 6, Textual support number: 1 CONT
La combinaison fusion par induction-centrifugation porte le niveau de qualité des pièces [...] produites à celui atteint à partir de métal élaboré au four à induction sous vide ou au convertisseur A.O.D., notamment en ce qui concerne les aciers austéno-ferritiques. 2, fiche 6, Français, - four%20%C3%A0%20induction%20sous%20vide
Fiche 6, Espagnol
Fiche 6, Justifications, Espagnol
Avis de droit d’auteur pour la banque de données TERMIUM Plus®
© Services publics et Approvisionnement Canada, 2026
TERMIUM Plus®, la banque de données terminologiques et linguistiques du gouvernement du Canada
Un produit du Bureau de la traduction
En vedette
GCtraduction (accessible uniquement sur le réseau du gouvernement du Canada)
Utilisez ce prototype d’intelligence artificielle pour traduire le contenu du gouvernement du Canada jusqu’au niveau Protégé B inclusivement. Réservé au personnel de certains ministères et organismes.
Outils d'aide à la rédaction
Les outils d’aide à la rédaction du Portail linguistique ont fait peau neuve! Faciles à consulter, ils vous donnent accès à une foule de renseignements utiles pour mieux écrire en français et en anglais.
Lexiques et vocabulaires
Accédez aux lexiques et vocabulaires du Bureau de la traduction.
- Date de modification :


