TERMIUM Plus^®

Fiche 1,  Justifications,  Anglais

Record number: 1, Textual support number: 1 CONT

One automatic bell drinker will serve up to one hundred birds. The bell drinker is designed in such a way that the birds cannot sit on it and it is suspended from the roof by a chain. The water pipe comes down parallel to the chain and inserts into the bell which contains a ball valve. This method will provide a constant fresh flow of water.  4, fiche 1, Anglais, - automatic%20bell%20waterer

Fiche 1,  Justifications,  Français

Fiche 1,  Justifications,  Espagnol

Fiche 2,  Justifications,  Anglais

Record number: 2, Textual support number: 1 CONT

Emergency Electronic Bell Tone System(Alert/Alarm Signal). An emergency electronic alert/alarm bell tone is broadcast over the public address system located throughout the building. Upon activation of a smoke detector, heat detector, water sprinkler flow valve, a manual pull station or the deliberate intervention of the operators within the Building Fire/Safety Control Centre, the electronic bell tone will sound warning occupants of a possible emergency. The bell tone indicates an ALERT or ALARM condition.  1, fiche 2, Anglais, - emergency%20electronic%20bell%20tone%20system

Fiche 2,  Justifications,  Français

Record number: 2, Textual support number: 1 CONT

Les haut-parleurs de l'édifice diffusent également une sonnerie électronique d'alarme ou d'alerte. Dès qu'un détecteur de fumée ou de chaleur est activé, qu'une valve de tête d'extincteur est ouverte, qu'une alarme est manuellement actionnée ou que les opérateurs du Centre de contrôle de l'édifice interviennent volontairement, la sonnerie électronique se déclenche pour avertir les occupants d'une éventuelle situation d'urgence. Le rythme de la sonnerie indique s'il s'agit d'une ALERTE ou d'une ALARME ».  1, fiche 2, Français, - syst%C3%A8me%20d%27avertisseurs%20%C3%A9lectroniques%20d%27urgence

Fiche 2,  Justifications,  Espagnol

Fiche 3,  Justifications,  Anglais

Record number: 3, Textual support number: 1 CONT

The rudder actuator is a tandem actuator, having two internal piston areas for each hydraulic source(A & B). The actuator is capable of positioning the rudder panel with either one or both main hydraulic sources available, though with one source inoperative a reduced rudder panel deflection would result due to blowdown at higher airspeeds. Flow of hydraulic fluid to the rudder actuator is controlled by the dual servo-valve. This is a complex dual concentric cylinder with an outer and inner slide. During normal rudder pedal inputs sufficient rudder panel deflection is catered for by the primary(inner) valve alone. However, should a larger panel deflection be required or a higher rate rudder input be commanded, the secondary(outer) sleeve moves in addition to port extra fluid to the actuator. Movement of the outer sleeve is typically no more than 1 mm. Position of both sleeves of the servo valve is controlled by a complex mechanism of bell cranks, input rod and summing lever, the geometry of which is such as to provide movement of the sleeves in relation to the body of the valve.  2, fiche 3, Anglais, - rudder%20actuator

Record number: 3, Textual support number: 1 OBS

Equivalent found on a cutaway diagram of a Boeing 767.  3, fiche 3, Anglais, - rudder%20actuator

Record number: 3, Textual support number: 2 OBS

rudder actuator: term standardized by ISO.  4, fiche 3, Anglais, - rudder%20actuator

Fiche 3,  Justifications,  Français

Record number: 3, Textual support number: 1 OBS

servocommande de direction : terme normalisé par l'ISO; vérin de direction: terme uniformisé par le Comité d'uniformisation de la terminologie aéronautique (CUTA) - Maintenance.  4, fiche 3, Français, - servocommande%20de%20direction

Fiche 3,  Justifications,  Espagnol