TERMIUM Plus^®

Fiche 1,  Justifications,  Anglais

Record number: 1, Textual support number: 1 DEF

cokes : The standard grades of hot-dipped tinplates, that carry about 0. 56 kg of tin per basis box(i. e. lighter coating than the charcoal grades), that consist of mild-steel coated with tin, and that are used for packaging, canning and general purposes.  3, fiche 1, Anglais, - coke%20plate

Record number: 1, Textual support number: 1 CONT

Various grades of hot-dipped tin plate were produced, the terminology indicating in a general way the weight of tin coating or, more exactly, the amount of tin used to produce the given unit or base box of plate. Coke tin plate has always designated the plate produced with the lowest amount of tin and formerly was called Cokes or Common Cokes. In ascending weight of coating, the various grades were Common Cokes, Standard Cokes, Best Cokes, and Kanners Special. Charcoal tin plate carries still heavier coatings including 1A and 2A.  2, fiche 1, Anglais, - coke%20plate

Record number: 1, Textual support number: 2 CONT

Terms, charcoal plate and coke plate, which in last century described quality of iron used as a base metal, have now come to be applied to tin plate of certain coating thickness. Amount of coating on coke plates is generally between 1. 24 and 2. 5 pounds per base box-on charcoal plates between 3 pounds and 5 pounds per base box. For roofing applications, heavier charcoal weight coatings have always been preferred. Common cokes, 1. 25 lb/base box. Standard cokes, 1. 50 lb/base box; Best cokes, 1. 70 lb/base box. "Kanners" special cokes, 2. 0 lb/base box.... Weight of coating on an electrolytic plate is a measurement of amount of coating on both sides of sheet, expressed in grams per square meter. Prior to adoption of this system, a "pot yield" method was used. The coating designation numbers are a hold over from this earlier system.  1, fiche 1, Anglais, - coke%20plate

Record number: 1, Textual support number: 1 OBS

coke; common coke : Terms usually used in the plural("cokes"; "common cokes").  3, fiche 1, Anglais, - coke%20plate

Fiche 1,  Justifications,  Français

Record number: 1, Textual support number: 1 OBS

Fer blanc étamé à chaud à partir de fers noirs laminés [...] Qualités : Common coke et standard coke.  4, fiche 1, Français, - fer%20blanc%20%C3%A0%20%C3%A9tamage%20mince

Fiche 1,  Justifications,  Espagnol

Fiche 2,  Justifications,  Anglais

Record number: 2, Textual support number: 1 CONT

Terms, charcoal plate and coke plate, which in last century described quality of iron used as a base metal, have now come to be applied to tin plate of certain coating thickness. Amount of coating on coke plates is generally between 1. 24 and 2. 5 pounds per base box-on charcoal plates between 3 pounds and 5 pounds per base box. For roofing applications, heavier charcoal weight coatings have always been preferred. Common cokes, 1. 25 lb/base box. Standard cokes, 1. 50 lb/base box; Best cokes, 1. 70 lb/base box. "Kanners" special cokes, 2. 0 lb/base box.... Weight of coating on an electrolytic plate is a measurement of amount of coating on both sides of sheet, expressed in grams per square meter. Prior to adoption of this system, a "pot yield" method was used. The coating designation numbers are a hold over from this earlier system.  3, fiche 2, Anglais, - best%20coke

Record number: 2, Textual support number: 2 CONT

Various grades of hot-dipped tin plate were produced, the terminology indicating in a general way the weight of tin coating or, more exactly, the amount of tin used to produce the given unit or base box of plate. Coke tin plate has always designated the plate produced with the lowest amount of tin and formerly was called Cokes or Common Cokes. In ascending weight of coating, the various grades were Common Cokes, Standard Cokes, Best Cokes, and Kanners Special. Charcoal tin plate carries still heavier coatings including 1A and 2A.  4, fiche 2, Anglais, - best%20coke

Record number: 2, Textual support number: 1 OBS

This grade of tin-plate carries heavier coatings of tin than coke grades but less than charcoal grades.  2, fiche 2, Anglais, - best%20coke

Record number: 2, Textual support number: 2 OBS

best coke : Usually used in the plural("best cokes").  2, fiche 2, Anglais, - best%20coke

Fiche 2,  Justifications,  Français

Fiche 2,  Justifications,  Espagnol

Fiche 3,  Justifications,  Anglais

Record number: 3, Textual support number: 1 CONT

Researchers assessed the chemical, rheological, and petrographic properties of coals and cokes.... Progress was made in standardizing petrographic analyses.  2, fiche 3, Anglais, - petrographic%20analysis

Record number: 3, Textual support number: 2 CONT

Laboratory methods such as chemical, thermo-rheological, and petrographic analysis are ... done to completely characterize coal and coke properties.  3, fiche 3, Anglais, - petrographic%20analysis

Fiche 3,  Justifications,  Français

Record number: 3, Textual support number: 1 DEF

Analyse des roches, de leur structure et de leur composition.  2, fiche 3, Français, - analyse%20p%C3%A9trographique

Record number: 3, Textual support number: 1 CONT

L'analyse pétrographique de la roche encaissante permet, tant dans les roches cristallines que sédimentaires, de substituer à la notion ancienne et vague de «roche ou niveau favorable», la notion plus précise de roche-magasin ou roche-support : perméabilité et porosité, granulométrie, composition chimique des éléments classiques et du ciment chimique, etc.  3, fiche 3, Français, - analyse%20p%C3%A9trographique

Record number: 3, Textual support number: 2 CONT

Les chercheurs ont évalué les propriétés chimiques, rhéologiques et pétrographiques des charbons et des cokes [...] On a avancé dans la normalisation des analyses pétrographiques.  4, fiche 3, Français, - analyse%20p%C3%A9trographique

Record number: 3, Textual support number: 3 CONT

Des méthodes de laboratoire telles que des analyses chimiques, thermo-rhéologiques et pétrographiques permettent [...] de caractériser complètement les propriétés du charbon et du coke.  5, fiche 3, Français, - analyse%20p%C3%A9trographique

Fiche 3,  Justifications,  Espagnol

Fiche 4,  Justifications,  Anglais

Record number: 4, Textual support number: 1 CONT

Terms, charcoal plate and coke plate, which in last century described quality of iron used as a base metal have now come to be applied to tin plate of certain coating thickness. Amount of coating on coke plates is generally between 1.24 and 2.5 pounds per base box - on charcoal plates between 3 pounds and 5 pounds per base box.  1, fiche 4, Anglais, - charcoal%20plate

Record number: 4, Textual support number: 2 CONT

Tin Plate. ... When coated by the hot-dip process, the tin plate was termed coke tin plate or charcoal tin plate. When coated by the electrolytic process, it is termed electrolytic tin plate. ... Hot-Dipped Tin Plate. Tin plate formerly was produced by the hot-dip tinning of thin plates that had been hammered or rolled from bars of puddled iron. The pig iron used in pudding might have been made in blast furnaces using charcoal or coke as fuel. Plates made from "charcoal iron" were considered a more ductile and higher grade product; hence, tin plate made by coating charcoal-iron plates with tin (charcoal tin plate) was regarded as a product of higher quality than tin plate with a coke-iron base (coke tin plate). At present, the designation "charcoal tin plate" merely indicates plate with a relatively heavy tin coating as compared with "coke tin plate" as described below, and has no significance so far as quality of the steel base is concerned.  2, fiche 4, Anglais, - charcoal%20plate

Record number: 4, Textual support number: 1 OBS

Various grades of hot-dipped tin plate were produced, the terminology indicating in a general way the weight of tin coating or, more exactly, the amount of tin used to produce the given unit or base box of plate. Coke tin plate has always designated the plate produced with the lowest amount of tin and formerly was called Cokes or Common Cokes. In ascending weight of coating, the various grades were Common Cokes, Standard Cokes, Best Cokes, and Kanners Special. Charcoal tin plate carries still heavier coatings including 1A and 2A.  2, fiche 4, Anglais, - charcoal%20plate

Fiche 4,  Justifications,  Français

Fiche 4,  Justifications,  Espagnol

Fiche 5,  Justifications,  Anglais

Record number: 5, Textual support number: 1 CONT

Terms, charcoal plate and coke plate, which in last century described quality of iron used as a base metal, have now come to be applied to tin plate of certain coating thickness. Amount of coating on coke plates is generally between 1. 24 and 2. 5 pounds per base box-on charcoal plates between 3 pounds and 5 pounds per base box. For roofing applications, heavier charcoal weight coatings have always been preferred. Common cokes, 1. 25 lb/base box. Standard cokes, 1. 50 lb/base box; Best cokes, 1. 70 lb/base box. "Kanners" special cokes, 2. 0 lb/base box.... Weight of coating on an electrolytic plate is a measurement of amount of coating on both sides of sheet, expressed in grams per square meter. Prior to adoption of this system, a "pot yield" method was used. The coating designation numbers are a hold over from this earlier system.  3, fiche 5, Anglais, - Kanners%20special%20coke

Record number: 5, Textual support number: 2 CONT

Various grades of hot-dipped tin plate were produced, the terminology indicating in a general way the weight of tin coating or, more exactly, the amount of tin used to produce the given unit or base box of plate. Coke tin plate has always designated the plate produced with the lowest amount of tin and formerly was called Cokes or Common Cokes. In ascending weight of coating, the various grades were Common Cokes, Standard Cokes, Best Cokes, and Kanners Special. Charcoal tin plate carries still heavier coatings including 1A and 2A.  4, fiche 5, Anglais, - Kanners%20special%20coke

Record number: 5, Textual support number: 1 OBS

This grade of tin-plate carries heavier coatings of tin than coke grades but less than charcoal grades.  2, fiche 5, Anglais, - Kanners%20special%20coke

Fiche 5,  Justifications,  Français

Fiche 5,  Justifications,  Espagnol

Fiche 6,  Justifications,  Anglais

Record number: 6, Textual support number: 1 CONT

Coating weights : Pure tin coating on a hot-dip tin plate is mechanically distributed over sheet surface by tinning rolls. Due to nature of this tinning operation and elevated temperature of metal it is not possible to control, within close limits, tin coating weight. For these and other reasons, coating is measured and described by "tin pot yield" method. Total weight(in pounds) of tin consumed in manufacture of one base box, is pot yield. Terms, charcoal plate and coke plate, which in last century described quality of iron used as a base metal, have now come to be applied to tin plate of certain coating thickness. Amount of coating on coke plates is generally between 1. 24 and 2. 5 pounds per base box-on charcoal plates between 3 pounds and 5 pounds per base box. For roofing applications, heavier charcoal weight coatings have always been preferred. Common cokes, 1. 25 lb/base box. Standard cokes, 1. 50 lb/base box; Best cokes, 1. 70 lb/base box. "Kanners" special cokes, 2. 0 lb/base box.... Weight of coating on an electrolytic plate is a measurement of amount of coating on both sides of sheet, expressed in grams per square meter. Prior to adoption of this system, a "pot yield" method was used. The coating designation numbers are a hold over from this earlier system.  1, fiche 6, Anglais, - tin%20pot%20yield

Record number: 6, Textual support number: 1 OBS

Various grades of hot-dipped in tin plate were produced, the terminology indicating in a general way the weight of tin coating or, more exactly, the amount of tin used to produce the given unit or base box of plate. Coke tin plate has always designated the plate produced with the lowest amount of tin and formerly was called Cokes or Common Cokes. In ascending weight of coating, the various grades were Common Cokes, Standard Cokes, Best Cokes, and Kanners Special. Charcoal tin plate carries still heavier coatings including 1A and 2A.  2, fiche 6, Anglais, - tin%20pot%20yield

Fiche 6,  Justifications,  Français

Record number: 6, Textual support number: 1 OBS

rendement de l'étain au creuset : équivalent proposé par la compagnie Stelco à Lachine.  1, fiche 6, Français, - rendement%20de%20l%27%C3%A9tain%20au%20creuset

Fiche 6,  Justifications,  Espagnol

Fiche 7,  Justifications,  Anglais

Record number: 7, Textual support number: 1 CONT

Terms, charcoal plate and coke plate, which in last century described quality of iron used as a base metal, have now come to be applied to tin plate of certain coating thickness. Amount of coating on coke plates is generally between 1. 24 and 2. 5 pounds per base box-on charcoal plates between 3 pounds and 5 pounds per base box. For roofing applications, heavier charcoal weight coatings have always been preferred. Common cokes, 1. 25 lb/base box. Standard cokes, 1. 50 lb/base box; Best cokes, 1. 70 lb/base box. "Kanners" special cokes, 2. 0 lb/base box.... Weight of coating on an electrolytic plate is a measurement of amount of coating on both sides of sheet, expressed in grams per square meter. Prior to adoption of this system, a "pot yield" method was used. The coating designation numbers are a hold over from this earlier system.  3, fiche 7, Anglais, - standard%20coke

Record number: 7, Textual support number: 1 OBS

Various grades of hot-dipped tin plate were produced, the terminology indicating in a general way the weight of tin coating or, more exactly, the amount of tin used to produce the given unit or base box of plate. Coke tin plate has always designated the plate produced with the lowest amount of tin and formerly was called Cokes or Common Cokes. In ascending weight of coating, the various grades were Common Cokes, Standard Cokes, Best Cokes, and Kanners Special. Charcoal tin plate carries still heavier coatings including 1A and 2A.  4, fiche 7, Anglais, - standard%20coke

Fiche 7,  Justifications,  Français

Fiche 7,  Justifications,  Espagnol

Fiche 8,  Justifications,  Anglais

Record number: 8, Textual support number: 1 DEF

A measure of the caking properties of coals. The number is obtained by comparing the profile of the sample under test with the profiles of a series of standard cokes under specified conditions.  1, fiche 8, Anglais, - swelling%20number

Fiche 8,  Justifications,  Français

Record number: 8, Textual support number: 1 DEF

Valeur mesurée du pouvoir agglutinant des houilles. C'est le numéro du profil type (type standard) dont la forme est la plus proche de celle du résidu cokéfié préparé dans des conditions déterminées.  1, fiche 8, Français, - indice%20de%20gonflement

Fiche 8,  Justifications,  Espagnol