TERMIUM Plus®

Par le Bureau de la traduction

Dans les médias sociaux

Consultez la banque de données terminologiques du gouvernement du Canada.

MIRROR FLIGHT [6 fiches]

Fiche 1 2024-10-22

Anglais

Subject field(s)
  • Types of Aircraft
  • Applications of Automation
CONT

Tri-rotor drones closely mirror the flight of a fixed-wing aircraft. They can make banked turns and are able to fly forward rapidly. Acceleration and deceleration are also very intuitive for the pilot. On the other hand, quadcopters are less intuitive to fly. This is because they are operated more like a helicopter with a single-rotor.

Terme(s)-clé(s)
  • trirotor drone

Français

Domaine(s)
  • Types d'aéronefs
  • Automatisation et applications

Espagnol

Conserver la fiche 1

Fiche 2 2007-02-05

Anglais

Subject field(s)
  • Astronautics
CONT

The local orbital reference system is defined at each point of the orbit by three unit vectors. These vectors are derived from the satellite position and velocity vectors: Vector L is colinear with position vector P (on the axis between the Earth’s centre and the satellite). It defines the yaw axis. Vector T is perpendicular to the orbital plane (vector L, vector V). It defines the pitch axis. Vector R completes the set of orthogonal axes. It lies in the plane defined by Vectors L and V and defines the roll axis. It does not coincide exactly with the velocity vector due to the eccentricity of the orbit.

CONT

Spacecraft axes. The three orthogonal axes of rotation : roll, pitch and yaw. If the spacecraft has a recognisable longitudinal axis or a specified forward direction of flight, the axes are analogous to those of an aircraft, where the roll axis is the longitudinal axis; the pitch axis is in the plane of the wings; and the yaw axis is the "vertical" axis, orthogonal to both the roll and pitch axes. The axes are mutually perpendicular, with an "origin" at the vehicle's centre of mass. For a winged spacecraft such as a Space Shuttle, the similarity with an aircraft is obvious. For expendable launch vehicles the roll axis is the axis which is vertical at launch and the other axes are more-or-less arbitrarily assigned since the vehicle rotates about the roll axis in flight.... The axes of a cylindrical spacecraft(e. g. Apollo, Suyuz, etc.) are similar to those of an ELV [Expendable Launch Vehicle] at launch, but one orbit assume the axis-definition of an aircraft(i. e. defined relative to the pilot's seat). The axes of a satellite mirror those of an aircraft "flying along the orbital arc" : the roll axis is aligned with the direction of travel; the yaw axis passes through the sub-satellite point; and the pitch axis is orthogonal to the other two. For a satellite in an equatorial orbit, the pitch axis is aligned approximately with the Earth's spin axis. The pitch axis is also the spin axis for the spin-stabilised satellite.

OBS

In the compilation of engineering drawings the three orthogonal axes are often labelled in Cartesian fashion: x=roll, y=pitch, z=yaw. For the three-axis stabilised spacecraft, the x-axis and y-axis are otherwise known as the east-west and north-south axes, respectively; the z-axis passes through the sub-satellite point. This leads to the definition of the box-shaped satellite’s faces as follows: the "plus-x face" faces east; the "minus-x face" faces west; +y faces south; -y faces north; +z is the Earth-pointing face; and -z is the "anti-Earth face."

OBS

roll axis; axis of roll: terms officially approved by the International Space Station official approval Group (ISSOAG) and by the RADARSAT-2 Terminology Approval Group (RTAG).

Français

Domaine(s)
  • Astronautique
CONT

Le repère orbital local est défini en chaque point de l'orbite par les trois vecteurs unitaires. Ces vecteurs sont construits à partir du vecteur position et du vecteur vitesse du satellite : le vecteur L est colinéaire au vecteur position P (sur l'axe centre Terre, satellite). Il définit l'axe de lacet. Le vecteur T est perpendiculaire au plan de l'orbite (vecteur L, vecteur V). Il définit l'axe de tangage. Le vecteur R complète le trièdre. Il appartient au plan (vecteur L, vecteur V) et définit l'axe de roulis. Il ne coïncide pas exactement avec le vecteur vitesse à cause de l'excentricité de l'orbite.

OBS

axe de roulis : terme uniformisé par le Groupe de travail de la terminologie de la Station spatiale internationale (GTTSSI) et par le Groupe de travail de la terminologie de RADARSAT-2 (GTTR).

Espagnol

Conserver la fiche 2

Fiche 3 2007-02-05

Anglais

Subject field(s)
  • Launching and Space Maneuvering
CONT

The local orbital reference system is defined at each point of the orbit by three unit vectors. These vectors are derived from the satellite position and velocity vectors: Vector L is colinear with position vector P (on the axis between the Earth’s centre and the satellite). It defines the yaw axis. Vector T is perpendicular to the orbital plane (vector L, vector V). It defines the pitch axis. Vector R completes the set of orthogonal axes. It lies in the plane defined by Vectors L and V and defines the roll axis. It does not coincide exactly with the velocity vector due to the eccentricity of the orbit.

CONT

Spacecraft axes. The three orthogonal axes of rotation : roll, pitch and yaw. If the spacecraft has a recognisable longitudinal axis or a specified forward direction of flight, the axes are analogous to those of an aircraft, where the roll axis is the longitudinal axis; the pitch axis is in the plane of the wings; and the yaw axis is the "vertical" axis, orthogonal to both the roll and pitch axes. The axes are mutually perpendicular, with an "origin" at the vehicle's centre of mass. For a winged spacecraft such as a Space Shuttle, the similarity with an aircraft is obvious. For expendable launch vehicles the roll axis is the axis which is vertical at launch and the other axes are more-or-less arbitrarily assigned since the vehicle rotates about the roll axis in flight.... The axes of a cylindrical spacecraft(e. g. Apollo, Suyuz, etc.) are similar to those of an ELV [Expendable Launch Vehicle] at launch, but one orbit assume the axis-definition of an aircraft(i. e. defined relative to the pilot's seat). The axes of a satellite mirror those of an aircraft "flying along the orbital arc" : the roll axis is aligned with the direction of travel; the yaw axis passes through the sub-satellite point; and the pitch axis is orthogonal to the other two. For a satellite in an equatorial orbit, the pitch axis is aligned approximately with the Earth's spin axis. The pitch axis is also the spin axis for the spin-stabilised satellite.

OBS

In the compilation of engineering drawings the three orthogonal axes are often labelled in Cartesian fashion: x=roll, y=pitch, z=yaw. For the three-axis stabilised spacecraft, the x-axis and y-axis are otherwise known as the east-west and north-south axes, respectively; the z-axis passes through the sub-satellite point. This leads to the definition of the box-shaped satellite’s faces as follows: the "plus-x face" faces east; the "minus-x face" faces west; +y faces south; -y faces north; +z is the Earth-pointing face; and -z is the "anti-Earth face."

OBS

pitch axis: term officially approved by the International Space Station official approval Group (ISSOAG) and by the RADARSAT-2 Terminology Approval Group (RTAG).

Français

Domaine(s)
  • Lancement et manœuvres dans l'espace
CONT

Le repère orbital local est défini en chaque point de l'orbite par les trois vecteurs unitaires. Ces vecteurs sont construits à partir du vecteur position et du vecteur vitesse du satellite : Le vecteur L est colinéaire au vecteur position P (sur l'axe centre Terre, satellite). Il définit l'axe de lacet. Le vecteur T est perpendiculaire au plan de l'orbite (vecteur L, vecteur V). Il définit l'axe de tangage. Le vecteur R complète le trièdre. Il appartient au plan (vecteur L, vecteur V) et définit l'axe de roulis. Il ne coïncide pas exactement avec le vecteur vitesse à cause de l'excentricité de l'orbite.

OBS

axe de tangage : terme uniformisé par le Groupe de travail de la terminologie de la Station spatiale internationale (GTTSSI) et par le Groupe de travail de la terminologie de RADARSAT-2.

Espagnol

Conserver la fiche 3

Fiche 4 2007-01-31

Anglais

Subject field(s)
  • Radar, Radio Guidance and Goniometry
  • Spacecraft
  • Remote Sensing
DEF

A sensor made up of a linear detector array of CCDs (Charge Coupled Devices) that obtains data in the platform’s direction of motion (azimuth or along-track dimension).

CONT

Along-track scanners also use the forward motion of the platform to record successive scan lines and build up a two-dimensional image, perpendicular to the flight direction. However, instead of a scanning mirror, they use a linear array of detectors located at the focal plane of the image formed by lens systems, which are "pushed" along in the flight track direction(i. e. along track). These systems are also referred to as pushbroom scanners, as the motion of the detector array is analogous to the bristles of a broom being pushed along a floor.

OBS

The sensor’s instantaneous field of view extends the length of the swath width.

OBS

along-track scanner; pushbroom scanner: terms officially approved by the RADARSAT-2 Terminology Approval Group (RTAG).

Terme(s)-clé(s)
  • along track scanner
  • push-broom scanner

Français

Domaine(s)
  • Radar, radioguidage et radiogoniométrie
  • Engins spatiaux
  • Télédétection
DEF

Capteur constitué d'une barrette de DTC (dispositifs à transfert de charge) qui collecte des données dans le sens de l'orbite de la plate-forme (en azimut ou en trajectoire longitudinale).

OBS

Principe de fonctionnement d'un système à barrette de détecteurs. [...] Le balayage est donc longitudinal à la manière d'un balai poussé devant soi, d'où l'expression «push broom» employée par certains auteurs. Comme les détecteurs sont tous de la même dimension et disposés parallèlement au sol, les tachèles sur le terrain sont également identiques s'il n'y a pas de distorsions optiques dans l'objectif.

OBS

Le balayage perpendiculaire à la trajectoire ratisse la Terre en une série de lignes. Le balayage s'effectue d'un côté du capteur à l'autre, en utilisant un miroir rotatif. La radiation atteignant le capteur est divisée en plusieurs composantes spectrales qui sont détectées séparément. L'UV, le visible, le proche infrarouge et l'infrarouge sont séparés selon leurs longueurs d'onde. Un ensemble de détecteurs internes, sensibles à chacune des bandes spectrales, mesurent et enregistrent l'énergie en convertissant le signal électrique produit par les détecteurs en données numériques.

OBS

dispositif de balayage longitudinal : terme uniformisé par le Groupe de travail de la terminologie de RADARSAT-2 (GTTR).

Espagnol

Campo(s) temático(s)
  • Guía radárica, radioguía y radiogoniometría
  • Naves espaciales
  • Teledetección
Conserver la fiche 4

Fiche 5 2003-06-12

Anglais

Subject field(s)
  • Research Experiments in Space
CONT

On its first flight EURECA was expected to achieve microgravity conditions of 5 x 10-7 9 and carried five Microgravity Multi-User Facilities : Automatic Monoellipsoid Mirror Furnace(AMP), the Exobiology and Radiation Assembly(ERA), the Multi-Furnace Assembly(MFA), the Protein Crystallization Facility(PCF), and the Solution Growth Facility(SGF). Also on board were the High Precision Thermostat(HPT) and the Surface Forces Adhesion(SPA) materials science experiments.

Français

Domaine(s)
  • Travaux de recherche dans l'espace

Espagnol

Conserver la fiche 5

Fiche 6 2001-07-31

Anglais

Subject field(s)
  • Aircraft Maneuvers
CONT

The team will amaze spectators with tight formation aerobatics and mirror flying.

Terme(s)-clé(s)
  • mirror flight

Français

Domaine(s)
  • Manœuvres d'aéronefs
CONT

Le vol en miroir où deux appareils se foncent dessus jusqu'au dernier moment, ils se croisent à quelques mètres l'un de l'autre.

CONT

Le «vol en miroir» est une autre spécialité de SKY BOX : l'avion leader est en vol inversé alors que l'équipier suit sa trajectoire, cockpit contre cockpit, en formation très serrée pour une boucle et un tonneau.

Espagnol

Conserver la fiche 6

Avis de droit d’auteur pour la banque de données TERMIUM Plus®

© Services publics et Approvisionnement Canada, 2026
TERMIUM Plus®, la banque de données terminologiques et linguistiques du gouvernement du Canada
Un produit du Bureau de la traduction

En vedette

GCtraduction (accessible uniquement sur le réseau du gouvernement du Canada)

Utilisez ce prototype d’intelligence artificielle pour traduire le contenu du gouvernement du Canada jusqu’au niveau Protégé B inclusivement. Réservé au personnel de certains ministères et organismes.

Outils d'aide à la rédaction

Les outils d’aide à la rédaction du Portail linguistique ont fait peau neuve! Faciles à consulter, ils vous donnent accès à une foule de renseignements utiles pour mieux écrire en français et en anglais.

Lexiques et vocabulaires

Accédez aux lexiques et vocabulaires du Bureau de la traduction.

Date de modification :