TERMIUM Plus®

Par le Bureau de la traduction

Dans les médias sociaux

Consultez la banque de données terminologiques du gouvernement du Canada.

IN-LINE SCREW SYSTEM [1 fiche]

Fiche 1 1998-01-19

Anglais

Subject field(s)
  • Plastics Manufacturing
CONT

Reciprocating screw systems. In a reciprocating (in-line) screw, the material is fed from the hopper, plasticized in the screw, and forced past a one-way valve at the injection end of the screw. The material accumulates in front of the screw, forcing back the screw, its drive and motor, and the pistons of the two hydraulic injection cylinders. ... When the screw reaches a certain position, it contacts a limit switch that stops the rotation. When the cycle is ready to inject, two hydraulic injection cylinders, one on each side of the carriage, move the screw assembly forward and use the screw as an injection ram.

Terme(s)-clé(s)
  • in-line screw system

Français

Domaine(s)
  • Plasturgie
CONT

[...] stockage de la matière par : [...] un système vis-piston [...]

Espagnol

Conserver la fiche 1

Avis de droit d’auteur pour la banque de données TERMIUM Plus®

© Services publics et Approvisionnement Canada, 2026
TERMIUM Plus®, la banque de données terminologiques et linguistiques du gouvernement du Canada
Un produit du Bureau de la traduction

En vedette

GCtraduction (accessible uniquement sur le réseau du gouvernement du Canada)

Utilisez ce prototype d’intelligence artificielle pour traduire le contenu du gouvernement du Canada jusqu’au niveau Protégé B inclusivement. Réservé au personnel de certains ministères et organismes.

Outils d'aide à la rédaction

Les outils d’aide à la rédaction du Portail linguistique ont fait peau neuve! Faciles à consulter, ils vous donnent accès à une foule de renseignements utiles pour mieux écrire en français et en anglais.

Lexiques et vocabulaires

Accédez aux lexiques et vocabulaires du Bureau de la traduction.

Date de modification :