TERMIUM Plus®

From: Translation Bureau

On social media

Consult the Government of Canada’s terminology data bank.

FRESH AIR INTAKE [5 records]

Record 1 2016-02-26

English

Subject field(s)
  • Underground Mining
  • Mine Ventilation, Heating and Lighting
DEF

The shaft through which the fresh air is drawn or forced into the mine; the intake.

OBS

... downcast ... is more appropriate for a shaft; intake for an adit or entry.

French

Domaine(s)
  • Exploitation minière souterraine
  • Ventilation, chauffage et éclairage des mines
CONT

L'air, en s'échauffant, ayant une tendance naturelle à monter, de même que le grisou, gaz léger, on cherche à ne pas faire descendre le courant d'air une fois qu'il a pénétré dans les travaux; c'est le principe de l'aérage ascensionnel [...] L'air descend par le puits d'entrée d'air, qui est habituellement aussi le puits principal d'extraction, jusqu'au niveau le plus bas de la mine, se répartit dans les travers-bancs d'entrée d'air, de là monte dans les divers travaux en longeant les fronts de taille [...]

Spanish

Save record 1

Record 2 2013-10-08

English

Subject field(s)
  • Building Ventilation
  • Tunnels, Overpasses and Bridges
DEF

An excavation or construction between a tunnel and the surface, used for the evacuation of vitiated air and smoke and/or the intake of fresh air for ventilation.

OBS

The shaft is often fitted with a chimney for easier dispersion of the vitiated air into the atmosphere.

OBS

ventilation shaft: term and definition proposed by the World Road Association.

French

Domaine(s)
  • Ventilation (Construction)
  • Tunnels, viaducs et ponts
DEF

Excavation entre un tunnel et la surface, utilisée pour l'évacuation [de l'air vicié et] des fumées [...] ou l'aspiration d'air frais pour la ventilation.

OBS

Le puits est souvent surmonté d'une cheminée pour favoriser la dispersion de l'air pollué dans l'atmosphère.

OBS

puits de ventilation : terme et définition proposés par l'Association mondiale de la route.

Spanish

Save record 2

Record 3 2010-04-06

English

Subject field(s)
  • Deep Drilling (Mines)
  • Oil Drilling
CONT

The exploration department at Cogema Resources ... recognized the technical difficulties and expense encountered in drilling deep vertical holes. The solution was a technique called navigational drilling (or Navi-drilling) that was used in the oil industry and, less often, in mining. ... Simply put, navi-drilling allows operators to begin drilling a new hole 500 to 600 metres below the surface by using a pre-existing "pilot hole." This significantly reduces costs as the same hole is used for up to six navi-drilling holes. A steerable motor with a rotor system turns a cutting bit. The motor is powered by hydraulic force created by the mixture of water and drilling muds pumped inside the drill string. The fluid is pumped through the motor and returns to the surface at a rate of up to 250 litres per minute. [Followed by an illustration of a schematic cross-section showing navi-drilling holes.]

CONT

Further deep drilling at Southwest Oyu will await the arrival of navigational drilling equipment, which will allow Ivanhoe to more accurately delineate the deeper portions of the high grade porphyry zone (in excess of one half of a mile deep).

CONT

Newbergh Industries Limited ("Newbergh") has developed and patented a technology which will greatly enhance the steering currently being used in oil and gas field directional drilling. This technology, which is known under the acronym of "HANDS", which stands for Hydraulic Activated Navigational Drilling System, will be incorporated in a so-called benthousing, which will make this piece of equipment remote adjustable whilst drilling for the first time. Its implication will improve drilling performance in terms of speed as well as quality and will result in considerable cost savings for the oil companies and savings in energy to drill the bore holes.

CONT

As underground development proceeds to production levels, a return air raise(RAR) will be installed approximately 270 metres north west of the Hart Shaft and allow the Hart Shaft to revert to a second fresh air intake source. The site for the RAR, which will probably be 4. 0 metres in diameter, has been confirmed following vertical navi drilling and the use of a RAAX digital imaging borehole camera to geotechnically assess the insitu ground conditions.

CONT

Directional Drilling Training. Navigation Drilling Training.

French

Domaine(s)
  • Sondage profond (Mines)
  • Forage des puits de pétrole
OBS

Forage multidirectionnel réalisé à partir d'un trou pilote.

OBS

forage multibranche : proposition d'un ingénieur, Institut français du pétrole; nous avons trouvé l'expression «puits multibranche» dans un site Internet (justification reproduite ci-après).

OBS

forage en faisceaux : proposition faite à partir de l'expression «faisceaux de pipelines» relevée dans un site Internet (justification reproduite ci-après); approuvée par l'Institut français du pétrole, nov. 2002.

OBS

navigationnel : Néologisme proposé à partir des attestations que l'on trouve dans le domaine de la télématique, où il est défini comme suit : «Caractéristique des systèmes qui permettent la navigation à travers les informations, c'est-à-dire de passer de l'une à l'autre directement». Cela n'est pas très parlant pour qualifier un forage, mais son pendant anglais ne l'est guère plus. Sous toutes réserves.

OBS

forage multilatéral : proposition de M. Stéphane Ménand, du Centre de géotechnique et d'exploitation du sous-sol, de l'École des mines de Paris. Nous hésitons cependant à recommander son emploi, étant donné que l'adjectif «multilatéral» n'est attesté que dans les domaines de l'économie et de la politique, pour désigner ce qui concerne les rapports entre des États. Nous pensons que «multibranche» ou «en faisceaux» sont préférables. (nov. 2002)

OBS

[...] l'expérimentation de puits multibranche, permettant de réaliser des extensions latérales dans des puits existants [...]

OBS

Notre société a construit plus de 1200 traversées par la méthode brevetée du Forage Horizontal Dirigé, dans toutes les parties du monde. [...] À ses débuts, le forage directionnel horizontal se limitait aux sols alluvionnaires tels que sable, limon et argile. Finalement, à la demande de ses clients, ses applications se sont étendues aux terrains rocheux. [...] Une autre application attractive du forage directionnel est l'installation de nombreux pipelines sur un parcours de forage commun. L'avantage principal des faisceaux de pipelines est la possibilité pour le client de limiter la quantité de droits de passage en dessous d'une voie d'eau ou d'un autre obstacle. HDI a fixé le standard pour des faisceaux de pipelines grâce à des installations dans le monde entier plus nombreuses que celles réalisés par les autres entreprises de forage directionnel. Les principales réalisations d'installations de faisceaux comprennent l'installation d'un faisceau de douze pipelines de 150 mm de diamètre sous la rivière Peene en Allemagne et de quatre pipelines de 300 mm de diamètre au-dessous du Mississippi aux États Unis.

Spanish

Save record 3

Record 4 1990-09-28

English

Subject field(s)
  • Strength of Materials
  • Engineering Tests and Reliability
  • Plastics Industry
OBS

Resistance to Temperature. ASTM Recommended Practice D 794 describes high-temperature testing for plastics. Only the procedure for heat exposure is specified, the test method being governed by the potential end use. Heat is applied using an oven with controlled air flow and with substantial fresh air intake. Two types of tests are described : continuous heat and cyclic heat. In the former, heat is gradually increased until failure occurs. Failure is defined as a change in appearance, weight, dimension, or other property that alters the material to a degree that it is no longer serviceable for the purpose in question. The test may take minutes to weeks, depending on the rate of temperature increase. The cyclic heat test repeatedly applies heat of a constant value until failure.

French

Domaine(s)
  • Résistance des matériaux
  • Fiabilité, contrôle et essais (Ingénierie)
  • Industrie des plastiques
OBS

Les méthodes d'essai d'endurance thermique sont destinées à déterminer les changements survenus dans les propriétés des matériaux par suite d'une longue exposition à une température élevée.

OBS

Températures et durées d'exposition. Les éprouvettes doivent être soumises à un minimum de trois températures réparties sur une gamme suffisamment étendue pour permettre l'établissement de la relation entre la température et la durée jusqu'à détérioration et pour déterminer le profil d'endurance thermique ou l'indice de température. [On distingue le] vieillissement par cycles [et le] vieillissement continu.

OBS

Essai cyclique. Essai composite dans lequel les mêmes expositions se répètent de façon cyclique [...]

Spanish

Save record 4

Record 5 1990-09-28

English

Subject field(s)
  • Strength of Materials
  • Engineering Tests and Reliability
  • Plastics Industry
OBS

Resistance to Temperature. ASTM Recommended Practice D 794 describes high-temperature testing for plastics. Only the procedure for heat exposure is specified, the test method being governed by the potential end use. Heat is applied using an oven with controlled air flow and with substantial fresh air intake. Two types of tests are described : continuous heat and cyclic heat. In the former, heat is gradually increased until failure occurs. Failure is defined as a change in appearance, weight, dimension, or other property that alters the material to a degree that it is no longer serviceable for the purpose in question. The test may take minutes to weeks, depending on the rate of temperature increase. The cyclic heat test repeatedly applied heat of a constant value until failure.

French

Domaine(s)
  • Résistance des matériaux
  • Fiabilité, contrôle et essais (Ingénierie)
  • Industrie des plastiques
OBS

Les méthodes d'essai d'endurance thermique sont destinées à déterminer les changements survenus dans les propriétés des matériaux par suite d'une longue exposition à une température élevée.

OBS

Températures et durées d'exposition. Les éprouvettes doivent être soumises à un minimum de trois températures réparties sur une gamme suffisamment étendue pour permettre l'établissement de la relation entre la température et la durée jusqu'à détérioration et pour déterminer le profil d'endurance thermique ou l'indice de température. [On distingue le] vieillissement par cycles [et le] vieillissement continu.

Spanish

Save record 5

Copyright notice for the TERMIUM Plus® data bank

© Public Services and Procurement Canada, 2026
TERMIUM Plus®, the Government of Canada's terminology and linguistic data bank
A product of the Translation Bureau

Features

GCtranslate (available on the Government of Canada network only)

Use this artificial intelligence prototype to translate Government of Canada content up to and including Protected B. Available to employees of selected departments and agencies only.

Writing tools

The Language Portal’s writing tools have a new look! Easy to consult, they give you access to a wealth of information that will help you write better in English and French.

Glossaries and vocabularies

Access Translation Bureau glossaries and vocabularies.

Date Modified: