TERMIUM Plus®

The Government of Canada’s terminology and linguistic data bank.

TEST PRESSURE GAUGE [8 records]

Record 1 2010-05-17

English

Subject field(s)
  • Measuring Instruments (Engineering)
  • Aeronautical Engineering and Maintenance
DEF

A measuring device used to check hydraulic pressure in different components of a hydraulic system.

CONT

3D Test pressure gauge series gives you a choice of two different degrees of accuracy to match your application. All 3D test pressure gauge accuracy figures are real : they include all friction, error, hysteresis, and linearity variations.... Every dial is clearly marked for fast, accurate reading with calibrations covering a 270° arc. Parallax is corrected on the test pressure gauge by a neutral glare-free face and a corrosion resistant stainless steel dial, incorporating a polished mirror band.

OBS

pressure gage: An instrument for measuring fluid pressure. A pressure gauge usually registers the difference between atmospheric pressure and the pressure of the fluid being measured by indicating the effect of such pressures on a measuring element (as a column of liquid, a bourdon tube, a diaphragm, or other pressure-sensitive device).

OBS

test gauge: this term should be used in non ambiguous contexts only.

Key term(s)
  • test pressure gage
  • test gage

French

Domaine(s)
  • Instruments de mesure (Ingénierie)
  • Aérotechnique et maintenance
DEF

Dispositif de mesure utilisé pour vérifier la pression des différents éléments d'un circuit hydraulique.

OBS

manomètre : Instrument de mesure et de contrôle de la pression d'un fluide, liquide ou gazeux.

OBS

manomètre d'essai : terme uniformisé par le Comité d'uniformisation de la terminologie aéronautique (CUTA) - Maintenance.

Spanish

Save record 1

Record 2 - external organization data 2010-02-19

English

Subject field(s)
  • Engineering Tests and Reliability
  • Transport of Goods
  • Radiation Protection
  • Compartment - Canadian Nuclear Safety Commission
CONT

Water immersion test : The package is immersed in water to the extent that all portions of the package are under at least 15 m for a period of not less than eight hours. An external pressure of water of 150 kPa gauge meets this condition.

CONT

"accident conditions of transport" means conditions similar to those resulting from the combination of the mechanical, thermal, and water immersion tests ... as applied to a package.

French

Domaine(s)
  • Fiabilité, contrôle et essais (Ingénierie)
  • Transport de marchandises
  • Radioprotection
  • Tiroir - Commission canadienne de sûreté nucléaire
CONT

Épreuve d'immersion dans l'eau. Le colis est immergé sous une hauteur minimum de 15 m d'eau, pendant au moins huit heures. On considère comme satisfaisante une pression d'eau extérieure égale à 150 kPa au manomètre.

CONT

«conditions d'accident de transport» désigne des conditions semblables à celles qui résulteraient de la combinaison des épreuves mécaniques, thermiques et d'immersion dans l'eau appliquées à un colis [...]

Spanish

Save record 2

Record 3 2006-12-19

English

Subject field(s)
  • Meteorological Forecasting, Data Measurement and Analysis
CONT

Snowpack tests on north-facing terrain show easy results. [Example approved by the Avalanche Bulletin Terminology Standardization Committee.]

OBS

Shovel Test... is used to locate sliding layers within the snowpack and to gauge the effort required to produce failure.... Interpretation of Results.... Easy. Fails with minimum pressure. Snow unstable. Natural avalanche releases likely; skier released avalanches a probability. Keep off steep slopes.

OBS

Compression test. ... Place a shovel blade on top of the column. Tap with finger tips, about 10 times, moving your hand from the wrist and rate any failure as "easy". Tap from the elbow, about 10 times, and rate any failure as "moderate". Finally, hit the shovel blade with an open hand or fist, about 10 times, and rate any failure as "hard."

OBS

Result taken from the stability test results tables (shovel shear test and compression test).

OBS

easy result: term officially approved by the Avalanche Bulletin Terminology Standardization Committee.

French

Domaine(s)
  • Prévisions météorologiques et mesure et analyse des données
CONT

On obtient des ruptures faciles dans les versants nord lors des tests de stabilité du manteau neigeux. [Exemple entériné par le Comité d'uniformisation de la terminologie des bulletins d'avalanche.]

OBS

Résultat obtenu lors de tests de stabilité (tableau sur les étapes de surcharge pour les tests de compression et les tests de cisaillement à la pelle).

OBS

rupture facile; cassure facile : termes uniformisés par le Comité d'uniformisation de la terminologie des bulletins d'avalanche.

Spanish

Save record 3

Record 4 2003-01-06

English

Subject field(s)
  • Scientific Instruments
  • Scientific Measurements and Analyses
  • Aerodynamics and Theory of Gases
CONT

In addition to measuring force and moment data with a six component strain gauge balance, each test article was instrumented with surface pressure ports on their fore and aft sections. Simultaneous force and moment and surface pressure measurements were made during the testing. This allowed for analysis of the aerodynamic flow field and the resulting total forces and moments on the test article...

French

Domaine(s)
  • Instruments scientifiques
  • Mesures et analyse (Sciences)
  • Théorie des gaz et aérodynamique

Spanish

Save record 4

Record 5 2002-11-06

English

Subject field(s)
  • Engineering Tests and Reliability
  • Security Devices
  • Facilities and Equipment (Wood Industries)
CONT

There are three ways to tell whether gaffs are sharpened properly. Step 1 : Three ways to maintain climbers : 1. 1. Gauging. This method checks the gaff's length, width, and thickness and the profile of its point.... 1. 2. Plane test. This method may be used with the gauge or independently if the gaffs are sharpened by machine. The test is made by using a soft board to tell whether proper sharpness has been reached. Place the climber with the gaff side down and parallel to the board without applying downward pressure above the gaff. Push the climber along the board. If the gaff is properly contoured and sharpened, it will dig into the wood and hold within approximately one inch. If the climber continues to glide along the board for more than one inch, it needs more honing. 1. 3. Pole cutout. After the climbers have been machine sharpened or gauged(and as often as required thereafter), the gaffs may be tested on a pole.

French

Domaine(s)
  • Fiabilité, contrôle et essais (Ingénierie)
  • Dispositifs de sécurité
  • Installations et équipement (Industr. du bois)

Spanish

Save record 5

Record 6 1999-04-01

English

Subject field(s)
  • Soil Mechanics (Engineering)
  • Soil Tests (Construction)
DEF

Index of the shearing resistance of soil obtained with the cone penetrometer: a number representing resistance to penetration into the soil of a 30° cone with a 1/2-in. base (actually, a load in pounds on a cone base area in square inches.

CONT

A cone penetrometer consists of a proving ring attached by rod to a steel cone. Test is performed by pushing the assembly into the ground and recording the dial gauge reading. The reading is then converted into a pressure called the cone index. Cone indices can be correlated to California bearing ratio test results.

French

Domaine(s)
  • Mécanique des sols
  • Essais du sol (Construction)
OBS

Le pénétromètre Meurisse. [...] Le fonçage s'effectue à l'aide d'un vérin hydraulique qui agit, soit sur la tige interne seule, soit simultanément sur la tige externe et le fourreau. Ce dispositif permet de mesurer séparément la résistance à la pénétration de la pointe et la résistance due au frottement latéral total.

OBS

[...] - la lecture des mesures de résistance en pointe, de frottement latéral sur le manchon de mesure, et d'effort total, est assurée par un système d'anneaux dynamométriques et de manomètres hydrauliques [...]

OBS

Pénétromètre [...] pour essais de résistance des terrains à la pointe et au frottement latéral.

Spanish

Save record 6

Record 7 1993-07-02

English

Subject field(s)
  • Rolling Stock (Railroads)
  • Braking Devices (Mechanical Components)
DEF

Train brake test leakage method that uses the brake pipe pressure gauge.

French

Domaine(s)
  • Matériel roulant (Chemins de fer)
  • Freins (Composants mécaniques)
DEF

Méthode d'essai d'étanchéité de frein qui emploie le manomètre de la conduite générale.

Spanish

Save record 7

Record 8 1986-10-06

English

Subject field(s)
  • Chemistry
CONT

The major thrust was to evaluate a deflagration to detonation transition(DDT) test and develop an expendable pressure gauge for use in this test.

French

Domaine(s)
  • Chimie
CONT

Le principal objectif était l'évaluation d'un essai de transition déflagration à détonation (TDD) et la mise au point d'un manomètre non récupérable pour utilisation dans cet essai.

Spanish

Save record 8

Copyright notice for the TERMIUM Plus® data bank

© Public Services and Procurement Canada, 2025
TERMIUM Plus®, the Government of Canada's terminology and linguistic data bank
A product of the Translation Bureau

Features

Language Portal of Canada

Access a collection of Canadian resources on all aspects of English and French, including quizzes.

Writing tools

The Language Portal’s writing tools have a new look! Easy to consult, they give you access to a wealth of information that will help you write better in English and French.

Glossaries and vocabularies

Access Translation Bureau glossaries and vocabularies.

Date Modified: