TERMIUM Plus®

From: Translation Bureau

On social media

Consult the Government of Canada’s terminology data bank.

THROUGH BOLT [29 records]

Record 1 2025-09-03

English

Subject field(s)
  • Small Arms
DEF

A magazine with a sealed bottom that is integral to the weapon.

OBS

A blind-box magazine is loaded through the breech opening with individual cartridges or ammunition clips. It is unloaded by operating the bolt and feeding each cartridge through the chamber to be ejected.

OBS

blind box magazine; blind-box magazine: designations and definition officially approved by the Army Terminology Panel.

French

Domaine(s)
  • Armes légères
DEF

Magasin au fond scellé qui fait partie de l'arme.

OBS

Un magasin vertical est approvisionné par l'ouverture de la culasse avec des cartouches individuelles ou une lame-chargeur. Il est désapprovisionné par une manœuvre de la culasse qui inclut d'abord l'introduction de chacune des cartouches dans la chambre, leur extraction et finalement leur éjection.

OBS

magasin vertical : désignation et définition uniformisées par le Groupe d'experts en terminologie de l'Armée de terre; désignation uniformisée par le Groupe de travail de terminologie des armes légères.

Spanish

Save record 1

Record 2 2023-09-05

English

Subject field(s)
  • Joining Elements (Mechanical Components)
  • Springs (Mechanical Components)
CONT

In a leaf spring assembly, one of the most important pieces is the center bolt. At the center of each leaf is a hole. The bolt gets slotted through this hole in each of the four, five or more leaves that comprise a spring. Effectively, the center bolt holds the leaves together and puts them in contact with the axle.

French

Domaine(s)
  • Éléments d'assemblage (Composants mécaniques)
  • Ressorts (Composants mécaniques)
DEF

Boulon d'assemblage placé au centre des lames de ressort de suspension pour les réunir les unes aux autres.

CONT

[Un boulon en U élimine] la courbure du ressort à lames, ce qui réduit également la concentration de contraintes près du trou du boulon de centrage de chaque lame.

Spanish

Campo(s) temático(s)
  • Elementos de empalme (Componentes mecánicos)
  • Resortes (Componentes mecánicos)
Save record 2

Record 3 2023-05-10

English

Subject field(s)
  • Metal Fasteners
  • Shipbuilding
DEF

A bolt retained by a key, gib, or cotter passing through a slot.

French

Domaine(s)
  • Clouterie et visserie
  • Constructions navales
CONT

Boulon à clavette. [...] Description. Tête circulaire concave. Tige de section circulaire. Pointe arrondie percée d'un trou rectangulaire servant à fixer une clavette.

Spanish

Save record 3

Record 4 2023-05-09

English

Subject field(s)
  • General Hardware
DEF

A headed pin or bolt of metal used for uniting two or more pieces by passing the shank through a hole in each piece and then beating or pressing down the plain end so as to make a second head.

French

Domaine(s)
  • Quincaillerie générale
DEF

Courte tige cylindrique munie d'une tête à une extrémité et dont l'autre extrémité est destinée à être aplatie au moment de l'assemblage.

Spanish

Save record 4

Record 5 2020-02-11

English

Subject field(s)
  • Mechanical Components
  • Flight Controls (Aeroindustry)
DEF

A usually U-shaped fastening device secured by a bolt or pin through holes in the end of the two arms.

French

Domaine(s)
  • Composants mécaniques
  • Commandes de vol (Constructions aéronautiques)
OBS

chape : terme accepté par le Comité d'étude de la terminologie des cartes de travail du DC-9.

Spanish

Campo(s) temático(s)
  • Componentes mecánicos
  • Mandos de vuelo (Industria aeronáutica)
Save record 5

Record 6 2020-01-13

English

Subject field(s)
  • Locks and Locksmithing
CONT

Bored locks are so named because their installation involves boring two holes at right angles to one another : one through the face of the door to accommodate the main locking mechanism and the other in the edge of the door to receive the latch or bolt mechanism.

French

Domaine(s)
  • Serrurerie
CONT

Les serrures encastrées sont nommées ainsi en raison de leur installation qui exige la perforation de deux trous perpendiculaires : l'un sur la face de la porte pour permettre l'insertion du mécanisme de verrouillage et l'autre sur le côté de la porte pour permettre l'installation du loquet ou du verrou.

Spanish

Save record 6

Record 7 2016-03-08

English

Subject field(s)
  • Locks and Locksmithing
  • Security Devices
  • Corporate Security
DEF

the face of a lock through which the bolts move; it is usually mortised in, so as to be flush with edge of door.

DEF

the part of a mortise lock through which the bolt protrudes and by which the lock is fastened to the door.

French

Domaine(s)
  • Serrurerie
  • Dispositifs de sécurité
  • Sécurité générale de l'entreprise
DEF

platine portant la ou les ouvertures de forme pour le passage et le guidage du (ou des) pêne(s); elle supporte éventuellement le tenon-guide.

CONT

La face traversée par le pêne est le bord B ou têtière, les trois autres sont les cloisons.

Spanish

Save record 7

Record 8 2016-02-25

English

Subject field(s)
  • Pest Control Equipment
  • Tillage Operations (Agriculture)
  • Mechanical Construction
CONT

Side thrust tends to push the discs to the left(...). This force is opposed by the pull of the tractor and the wheels of the discer. The side thrust forces act at the bottom of the discs and are resisted at the center of the discs through the gang bolt(...).

French

Domaine(s)
  • Matériel de protection des végétaux
  • Travaux du sol (Agriculture)
  • Construction mécanique
CONT

La poussée latérale tend à pousser la machine vers la gauche (...). Cette force est opposée par la force de traction et par les roues-guides [de la charrue à disques]. Les poussées latérales agissent sur la bas des disques et sont opposées, au centre des disques, par la butée d'arrêt du train de disques (...).

Spanish

Save record 8

Record 9 2015-08-28

English

Subject field(s)
  • Veterinary Equipment
  • Slaughterhouses
OBS

[The] dispatch kit combines the techniques of controlled blunt-force trauma and penetrating captive bolt into a euthanasia system. It can be used to euthanise a range of species, from small animals such as poultry through to extremely large animals such as bulls.

OBS

[The] stunner [included in the dispatch kit] renders the animal instantly and irreversibly insensible to pain prior to slaughter, eliminating stress and suffering, improving meat quality and throughput, resulting in increased profits.

French

Domaine(s)
  • Équipement vétérinaire
  • Abattoirs
DEF

Trousse servant à étourdir les animaux pour les euthanasier ou pour les préparer à l’abattage, selon le cas.

Spanish

Save record 9

Record 10 2011-08-19

English

Subject field(s)
  • Atmospheric, Climatic and Meteorological Phenomena
DEF

The sound that results from the formation of lightning. This burst of lightning expands air around it, producing an effect similar to an explosion, thus creating the noise.

CONT

Thunder is the noise caused by the explosive expansion of air due to the heat generated by a lightning discharge. Thunder may have a sharp cracking sound when lightning is close by, compared to a rumbling noise produced by more distant strokes.

CONT

Thunder... moves through the atmosphere at a speed of about one mile in five seconds. To obtain the distance in miles of a lightning bolt, count the number of seconds between flash and thunder, then divide by five.

French

Domaine(s)
  • Phénomènes météorologiques, climatiques et atmosphériques
DEF

Onde acoustique, se manifestant par un bruit sec ou un roulement sourd, accompagnant un éclair et qui est due à la dilatation brusque de l'air par réchauffement le long du trajet de l'éclair.

CONT

L'impression auditive de roulement perçue par un observateur à distance a pour origine un phénomène de battement entre les ondes émises tout au long de l'éclair. Le tonnerre peut être entendu jusqu'à environ 25 kilomètres de distance. En raison de la vitesse de la lumière (300 000 kilomètres par seconde) la détection visuelle d'un éclair peut être considérée comme instantanée, alors que le «coup de tonnerre» qui lui est associé se transfère à la vitesse du son, soit approximativement 330 mètres par seconde. Ainsi en divisant par trois l'écart de temps exprimé en secondes entre la perception de l'éclair et l'audition du coup de tonnerre, on obtient une estimation approchée de la distance de l'orage, en kilomètres.

Spanish

Campo(s) temático(s)
  • Fenómenos meteorológicos, climáticos y atmosféricos
DEF

Ruido que produce un rayo cuando se propaga por la atmósfera.

CONT

En el instante que se produce el rayo se origina el trueno. El calor producido por la descarga eléctrica calienta el aire y lo expande bruscamente, dando lugar a ondas de presión que se propagan como ondas sonoras. Cuando esas ondas sonoras pasan sobre el observador, este percibe el ruido denominado trueno. Como la velocidad de la luz es de 300.000 km/s, el relámpago se ve casi al instante en que tiene efecto, pero no ocurre lo mismo con el trueno, ya que el sonido se propaga más lentamente, a unos 300 m/s. Por esto el trueno se oye después de desaparecer el relámpago.

OBS

Se debe a la expansión rápida de los gases a lo largo de un canal de descarga eléctrica.

Save record 10

Record 11 2011-06-20

English

Subject field(s)
  • Foundry Practice
DEF

A small iron plate let into foundry patterns. A screw-threaded bolt is inserted into a hole drilled through the plate, to facilitate the removal of the pattern from the mould.

French

Domaine(s)
  • Fonderie
DEF

Plaque percée d'un trou taraudé, fixée sur le modèle, qui sert à extraire le modèle hors du moule.

Spanish

Save record 11

Record 12 2011-02-23

English

Subject field(s)
  • Curling
DEF

The lower portion of the handle of a curling rock that connects with the bolt through the centre of the rock.

French

Domaine(s)
  • Curling
DEF

Partie recourbée de la poignée d'une pierre de curling qui la relie à la tige qui traverse la pierre par le centre.

OBS

Le cou de cygne n'est qu'une partie de la poignée d'une pierre de curling et non toute la poignée. Le terme «goose neck» ne doit donc pas être rendu par «poignée de la pierre» de curling.

Spanish

Save record 12

Record 13 2011-02-18

English

Subject field(s)
  • Security Devices
  • Locks and Locksmithing
CONT

... turnpieces(locks with manual function inside) must be of a type which must be rotated through an angle of not more than 90°(one quarter turn) before releasing a locking bolt.

French

Domaine(s)
  • Dispositifs de sécurité
  • Serrurerie
CONT

Les boutons du type serrure camarde que l'on doit tourner de plus de 90 ° pour dégager le pêne ne sont pas réputés faciles à ouvrir.

Spanish

Save record 13

Record 14 2010-04-15

English

Subject field(s)
  • Mechanical Transmission Systems
OBS

[A tie rod cylinder] is held together with four additional longitudinal rods, which extend the full length of the barrel and pass through holes in each corner of a square flange in the end caps of the cylinder. The ends of the rods are threaded and the whole assembly(cylinder barrel, ends, seats, etc.) is held together with lock washers and nuts. In some designs, instead of passing through holes in flanges in the ends of the cylinder, the tie rods are actually a long bolt. The threaded end of the bolts pass through a non-threaded hole in one cylinder end and screw into a tapped hole in the other.

French

Domaine(s)
  • Transmissions mécaniques
OBS

[Dans un vérin Joint Industry Conference, les] fonds sont de forme carrée et sont maintenus contre le cylindre par des tirants.

OBS

J. I. C. signifie Joint Industry Conference. Ce nom désigne [un groupe établissant une standardisation d'organes hydrauliques].

Spanish

Save record 14

Record 15 2005-03-18

English

Subject field(s)
  • Aeronautical Engineering and Maintenance
  • Helicopters (Military)
CONT

The bolt which goes through the "pitch horn" also goes through a pitch change rod end... which has one of those spherical bearings in it. This allows the rod end to push and pull on the pitch horn, thereby changing the pitch of the blade.... The other end of the rod end... is attached to the pitch change yoke.... The pitch change rod is actually a shaft which goes through the hollow shaft [on which] the tail rotor is mounted on...

French

Domaine(s)
  • Aérotechnique et maintenance
  • Hélicoptères (Militaire)
CONT

Pour ce qui est de la tête du rotor principal, désaccoupler les biellettes et amortisseurs de changement de pas, et vérifier que les articulations de battement, de traînée ainsi que les manchons de pale se déplacent librement, sans grippage ou sans rugosité.

Spanish

Save record 15

Record 16 2002-11-13

English

Subject field(s)
  • Heat Treatment: Intervening Factors (Metals)
  • Thermoelectricity and Thermoelectronics
CONT

The new 60-megawatt segmented arc heater, known as H3, significantly improves AEDC' s [Arnold Engineering Development Center] present arc capabilities... Arc heaters such as H3 produce the high pressures and heat fluxes required for testing thermal protection materials used for nose tips and heat shields. Arc heater tests provide information to manufacturers about the probable condition a space vehicle component would experience following re-entry into Earth's atmosphere. An arc heater is basically a large tube that high-pressure air runs through. The air is heated by discharging tens of megawatts of power using an electric arc similar to a lightning bolt. At the nozzle, or downstream end of the heater, test personnel install models or materials and subject them to simulated high pressure and temperature conditions generated by the bolt. Temperatures range from 5, 000 to 15, 000 degrees Fahrenheit, requiring each component to be water-cooled.

French

Domaine(s)
  • Traitement thermique des métaux (Facteurs)
  • Thermoélectrique et thermoélectronique

Spanish

Save record 16

Record 17 1999-10-19

English

Subject field(s)
  • Building Hardware
  • Joints and Connections (Construction)
  • Joining Elements (Mechanical Components)
DEF

A bolt set through the members it connects.

French

Domaine(s)
  • Quincaillerie du bâtiment
  • Joints et assemblages (Construction)
  • Éléments d'assemblage (Composants mécaniques)
Key term(s)
  • boulon débouchant

Spanish

Save record 17

Record 18 1999-10-19

English

Subject field(s)
  • Mining Dangers and Mine Safety
DEF

Subsidence due to the caving or collapse of underground workings.

CONT

Ground movement monitor : This monitor would be attached to a rock bolt and would be placed in the hole with this part attached to the rock. If the rock started to move, the rod will come out and the information would be carried through the wire to a remote sensing device where we could read the information.

French

Domaine(s)
  • Exploitation minière (dangers et sécurité)

Spanish

Save record 18

Record 19 1999-10-19

English

Subject field(s)
  • Ground-Drilling Facilities (Mining)
DEF

A timber cross-bar up to 16 feet long supported by two heavy legs, or uprights, one at each end. Crowns may be set at 3 ft intervals and sometimes a roof bolt is put up through the center of the crown.

PHR

Crown runner.

Key term(s)
  • crown section
  • top section

French

Domaine(s)
  • Installations de forage minier
DEF

Plafond d'une galerie.

Spanish

Campo(s) temático(s)
  • Instalaciones de perforación minera
Save record 19

Record 20 1999-10-09

English

Subject field(s)
  • Joining Elements (Mechanical Components)
  • Metal Fasteners
DEF

A round head type of bolt with a square neck, used with a nut as a through bolt.

French

Domaine(s)
  • Éléments d'assemblage (Composants mécaniques)
  • Clouterie et visserie
DEF

Boulon à tête mince circulaire, ovale ou fraisée, comportant un système d'immobilisation sous la tête.

Spanish

Campo(s) temático(s)
  • Elementos de empalme (Componentes mecánicos)
  • Clavos y tornillos
DEF

Tallo de un tornillo de cabeza redonda, que se encuentra inmediatamente debajo de dicha cabeza, evitando que el tornillo gire mientras se coloca o quita la tuerca.

Save record 20

Record 21 1996-07-19

English

Subject field(s)
  • Simulation (Cybernetic Systems)
CONT

Nicholas Negroponte and Richard Bolt pioneered the notion of computerized work-arounds for transmitting facial presence, but their apparatus required each participant to have a mask of the others present in his or her communication space; images of facial movements would be projected into the masks, creating an inexpensive and relatively effective three-dimensional simulation of a literal talking head. The facial mask is created solely within the computer through the use of shape-acquisition and facial modeling systems.

French

Domaine(s)
  • Simulation (Systèmes cybernétiques)

Spanish

Save record 21

Record 22 1991-05-13

English

Subject field(s)
  • Small Arms
DEF

Bolt which passes through a buttstock lengthwise to secure it to the receiver.

OBS

Term and definition officialized by the Small Arms Terminology Working Group.

French

Domaine(s)
  • Armes légères
DEF

Vis traversant la crosse dans le sens de la longueur pour la fixer au boîtier de culasse ou à la carcasse.

OBS

Terme et définition uniformisés par le Groupe de travail de terminologie des armes légères.

Spanish

Save record 22

Record 23 1991-03-25

English

Subject field(s)
  • Small Arms
DEF

Bolt action design in which the bolt handle is all the way to the rear and the action cocks on opening of the bolt. The bolt handle does not pass through the receiver bridge, e. g. C3 Sniper Rifle.

OBS

Term and definition officialized by the Small Arms Terminology Working Group.

French

Domaine(s)
  • Armes légères
DEF

Type de mécanisme à verrou dans lequel le levier de culasse est situé complètement à l'arrière et qui est armé par le mouvement d'ouverture de la culasse. Le levier de culasse ne passe pas au travers du pont du boîtier de culasse, e.g. le fusil de tireur d'élite C3.

OBS

Terme et définition uniformisés par le Groupe de travail de terminologie des armes légères.

Spanish

Save record 23

Record 24 1987-06-11

English

Subject field(s)
  • Small Arms
CONT

The extractor on the bolt face is located above the cannelure of the cartridge and the spring-loaded ejector impels it upward through the slot in the operating rod and the ejection port in the top of the receiver.

French

Domaine(s)
  • Armes légères
CONT

L'extracteur étant situé au-dessus de la gorge de l'étui, l'éjecteur rappelé par ressort projette l'étui vers le haut à travers la découpe de la bielle de commande et la fenêtre d'éjection percée au sommet de la boîte de culasse.

Spanish

Save record 24

Record 25 1986-10-01

English

Subject field(s)
  • Flight Controls (Aeroindustry)
CONT

The aileron sectors and load-feel cranks are located on the rear spar of each wing at the inboard end of the aileron. The sectors transmit movement of the cable systems through mechanical linkage to the control tabs and ailerons. The load-feel cranks provide a simulated feel of aileron flight load at the aileron control wheels and also act as a centering device to return the aileron control system to neutral. The two sectors and two load-feel cranks are mounted on a common bolt in the inboard aileron hinge support bracket.... The load-feel cranks are installed between the two sectors and are connected to each other by a spring at one end. Adjustable stopbolts at the other end of each crank are in contact with a stop on the wing structure. Adjustable stopbolts, midway along each crank, are in contact with stopbolts on a boss on the control tab sector.

French

Domaine(s)
  • Commandes de vol (Constructions aéronautiques)
OBS

biellette de sensation artificielle : terme accepté par le Comité d'étude de la terminologie des cartes de travail du DC-9.

Spanish

Save record 25

Record 26 1982-09-28

English

Subject field(s)
  • Locks and Locksmithing
OBS

a strike with a remote control which, through compressed air or electric current, operates a mobile device releasing the latch bolt.

French

Domaine(s)
  • Serrurerie
OBS

gâche commandant l'ouverture à distance par un intermédiaire tel que l'air comprimé ou le courant électrique, agissant sur une partie mobile libérant le pêne demi-tour.

Spanish

Save record 26

Record 27 1979-01-17

English

Subject field(s)
  • Joining Elements (Mechanical Components)
DEF

A long slim bolt for uniting two parts at right angles or for securing girders to a supporting post by being driven through one piece then bent into the other.

French

Domaine(s)
  • Éléments d'assemblage (Composants mécaniques)

Spanish

Save record 27

Record 28 1979-01-12

English

Subject field(s)
  • Locks and Locksmithing
DEF

The opening in lever tumblers through which the fence passes to permit actuation of the bolt.

French

Domaine(s)
  • Serrurerie
DEF

L'ouverture de la gorge qui détermine la forme du panneton.

Spanish

Save record 28

Record 29 1979-01-09

English

Subject field(s)
  • Locks and Locksmithing
DEF

a piece for transmitting motion from the hub of a lock to the latch bolt.

DEF

the sliding part or connecting link through which the bolt is operated by hub or key.

French

Domaine(s)
  • Serrurerie
DEF

Partie du pêne située à l'intérieur de la serrure, souvent de plus faible épaisseur que la tête appelée à faire saillie hors de la têtière.

Spanish

Save record 29

Copyright notice for the TERMIUM Plus® data bank

© Public Services and Procurement Canada, 2026
TERMIUM Plus®, the Government of Canada's terminology and linguistic data bank
A product of the Translation Bureau

Features

GCtranslate (available on the Government of Canada network only)

Use this artificial intelligence prototype to translate Government of Canada content up to and including Protected B. Available to employees of selected departments and agencies only.

Writing tools

The Language Portal’s writing tools have a new look! Easy to consult, they give you access to a wealth of information that will help you write better in English and French.

Glossaries and vocabularies

Access Translation Bureau glossaries and vocabularies.

Date Modified: