TERMIUM Plus®

From: Translation Bureau

On social media

Consult the Government of Canada’s terminology data bank.

CREW EQUIPMENT TRANSLATION AID [6 records]

Filter results by subject field Alphabetical list of terms

Filter results by subject field

Alphabetical list of terms

Record 1 2017-01-20

English

Subject field(s)
  • Orbital Stations
  • Space Exploration Equipment and Tools
CONT

CETA is a cart that will move along the Mobile Transporter’s rail system and function as a mobile work platform enabling spacewalkers to transport themselves and any necessary equipment along the length of the truss. Installation of the S1 truss and CETA cart will require three spacewalks.

OBS

crew and equipment translation aid; CETA : term and abbreviation officially approved by the International Space Station official approval Group(ISSOAG).

PHR

Crew and equipment translation aid(CETA) cart A, cart B.

French

Domaine(s)
  • Stations orbitales
  • Équipement et outillage d'exploration spatiale
CONT

Les CETA (Crew & Equipment Translation Aid) sont des chariots de transport qui évolueront de part et d'autre du transporteur mobile américain sur lequel est installée la base mobile canadienne qui supporte le Canadarm2. Surnommés Cart A et Cart B ils peuvent être mis en œuvre manuellement par un astronaute en sortie extra-véhiculaire et utilisés comme plate-forme de travail.

OBS

chariot d'aide au déplacement des équipages et de l'équipement; chariot CETA; CETA : termes et abréviation uniformisés par le Groupe de travail de la terminologie de la Station spatiale internationale (GTTSSI).

Spanish

Save record 1

Record 2 2004-06-08

English

Subject field(s)
  • Orbital Stations
CONT

... first starboard truss segment, was attached to the starboard side of the S0 Truss.... The S1 Truss provides structural support for the Active Thermal Control System, Mobile Transporter and one Crew and Equipment Translation Aid cart.... The S1 Truss also has mounts for cameras and lights, as well as antenna support equipment for S-band communications equipment.

OBS

The assembly sequence of the trusses on the International Space Station does not usually correspond to the number assigned to each segment of the struss structure. Trusses are numbered as follows: P1, P3, P4, P5, P6 (port side) and S1, S3, S4, S5, S6 (starboard side). In this case however, the S1 structure is referred to as the first starboard truss segment.

OBS

first starboard truss segment: term officially approved by the International Space Station official approval Group (ISSOAG).

French

Domaine(s)
  • Stations orbitales
CONT

[...] la l5e mission (9A) vers la Station spatiale internationale avec le premier segment tribord de la poutrelle (ITS-S1) et des radiateurs.

OBS

La séquence d'assemblage des poutres bâbord (P1, P3, P4, P5, P6) et tribord (S1, S3, S4, S5, S6) de la Station spatiale internationale diffère habituellement de l'ordre de numérotation des éléments structuraux de la grande poutrelle. Dans le cas présent toutefois, la poutre S1 correspond au premier segment tribord de la poutrelle.

OBS

premier segment tribord de la poutrelle : terme uniformisé par le Groupe de travail de la terminologie de la Station spatiale internationale (GTTSSI).

Spanish

Save record 2

Record 3 2003-12-22

English

Subject field(s)
  • Orbital Stations
CONT

This truss segment, called "P1," is a 46-by-15 foot structure weighing about 32,000 pounds when fully outfitted and ready for launch.

CONT

The P1 Truss, the first port truss segment, was attached to the port side of the S0 truss... The P1 Truss provides structural support for the Active Thermal Control System, Mobile Transporter and one Crew and Equipment Translation Aid cart.... The P1 Truss also has mounts for cameras and lights, and antenna support equipment for both UHF [Ultra High Frequency] and S-band communications equipment. The S-band equipment is currently on the P6 Truss.

CONT

The main truss segments-S0, P1, S1, P3, and S3-were designed as rigid hexagonal sections; a six-point structure is more rigid than one with four points. The hexagonal cross section also maximizes the volume that can be used to load equipment onto the truss. A square will not use the available volume as well as a hexagon. ... The truss segments are not regular hexagons; the sides are not equal in length. The segments are wider than they are tall to further exploit the Shuttle payload bay area ...

OBS

P1 truss; integrated truss structure P1; P1; ITS-P1: terms and abbreviations officially approved by the International Space Station official approval Group (ISSOAG).

French

Domaine(s)
  • Stations orbitales
CONT

[...] l'équipage de STS 113 installeront le troisième segment de l'immense poutrelle qui portera éventuellement les panneaux solaires (générant l'électricité) et les grands radiateurs (évacuateurs de chaleur). Il s'agit de la pièce dite P1, la première portion bâbord (gauche) de la poutrelle. Ce segment est identique au S1 (premier segment tribord, droit) installé en octobre. Au terme de cette opération d'assemblage, la poutrelle mesurera 40,5 mètres (elle fera, à terme, 108 mètres).

OBS

poutre P1; segment de poutre intégrée P1; P1; ITS-P1 : termes et abréviations uniformisés par le Groupe de travail de la terminologie de la Station spatiale internationale (GTTSSI).

Spanish

Save record 3

Record 4 2003-05-23

English

Subject field(s)
  • Orbital Stations
CONT

The P1 Truss, the first port truss segment, was attached to the port side of the S0 truss.... The P1 Truss provides structural support for the Active Thermal Control System, Mobile Transporter and one Crew and Equipment Translation Aid cart.... The P1 Truss also has mounts for cameras and lights, and antenna support equipment for both UHF [Ultra High Frequency] and S-band communications equipment. The S-band equipment is currently on the P6 Truss.

OBS

The assembly sequence of the trusses on the International Space Station does not usually correspond to the number assigned to each segment of the struss structure. Trusses are numbered as follows: P1, P3, P4, P5, P6 (port side) and S1, S3, S4, S5, S6 (starboard side). In this case however, the P1 truss is referred to as the first port truss segment.

OBS

first port truss segment: term officially approved by the International Space Station official approval Group (ISSOAG).

French

Domaine(s)
  • Stations orbitales
CONT

[...] l'équipage de STS 113 installeront le troisième segment de l'immense poutrelle qui portera éventuellement les panneaux solaires (générant l'électricité) et les grands radiateurs (évacuateurs de chaleur). Il s'agit de la pièce dite P1, le première portion bâbord (gauche) de la poutrelle. Ce segment est identique au S1 (premier segment tribord, droit) installé en octobre. Au terme de cette opération d'assemblage, la poutrelle mesurera 40,5 mètres (elle fera, à terme, 108 mètres).

OBS

La séquence d'assemblage des poutres bâbord (P1, P3, P4, P5, P6) et tribord (S1, S3, S4, S5, S6) de la Station spatiale internationale diffère habituellement à l'ordre de numérotation des éléments structuraux de la grande poutrelle. Dans le cas présent toutefois, la poutre P1 correspond au premier segment bâbord de la poutrelle.

OBS

premier segment bâbord de la poutrelle : terme uniformisé par le Groupe de travail de la terminologie de la Station spatiale internationale (GTTSSI).

Spanish

Save record 4

Record 5 2002-11-27

English

Subject field(s)
  • Orbital Stations
CONT

S1-Truss. Dimensions : 13. 7 meters x 4. 6 meters x 1. 8 meters(45 feet x 15 feet x 6 feet) [;] Weight : 14, 124 kilograms(31, 137 pounds). The S1 Truss, the first starboard truss segment, was attached to the starboard side of the S0 Truss Oct. 10, 2002. The S1 Truss provides structural support for the Active Thermal Control System, Mobile Transporter and one Crew and Equipment Translation Aid cart. The cart is manually operated by a spacewalker and can also be used as a work platform. The cooling system is like the one in a car radiator except that it uses 99. 9 percent pure ammonia, compared to 1 percent in household products. The Thermal Radiator Rotary Joint rotates the three radiator structures in a 105-degree span either way to keep the three radiators panels in the shade; it also transfers power and ammonia to the radiators. The S1 Truss also has mounts for cameras and lights, as well as antenna support equipment for S-band communications equipment.

OBS

S1 truss; integrated truss structure S1; S1; ITS-S1: terms and abbreviations officially approved by the International Space Station official approval Group (ISSOAG).

French

Domaine(s)
  • Stations orbitales
CONT

La nouvelle poutre comprend l'un des trois futurs radiateurs du système de refroidissement, composé lui-même de 18 panneaux. La poutre S1 est également dotée d'équipement de télécommunications, de caméras et d'un système d'éclairage.

OBS

poutre S1; segment de poutre intégrée S1; S1; ITS-S1 : termes et abréviations uniformisés par le Groupe de travail de la terminologie de la Station spatiale internationale (GTTSSI).

Spanish

Save record 5

Record 6 2002-06-11

English

Subject field(s)
  • Space Exploration Equipment and Tools
  • Orbital Stations
CONT

The tool consists of a series of metallic stacked balls and active EVA changeout mechanisms at each end. The ball stack is covered by a sleeve to trap debris if the ball stack fails.

CONT

The ball stack is used to temporarily stabilize and restrain an ORU [Orbital Replaceable Unit] during station maintenance activities. It allows the spacewalker to attach various other EVA [Extravehicular activity] tools, such as the CETA [Crew & Equipment Translation Aid] cart, crane, tool stanchion, and TERA [Temporary Equipment Restraint Aid].

OBS

ball stack: term officially approved by the International Space Station official approval Group (ISSOAG).

French

Domaine(s)
  • Équipement et outillage d'exploration spatiale
  • Stations orbitales
OBS

attache flexible à billes : terme uniformisé par le Groupe de travail de la terminologie de la Station spatiale internationale (GTTSSI).

Spanish

Save record 6

Copyright notice for the TERMIUM Plus® data bank

© Public Services and Procurement Canada, 2026
TERMIUM Plus®, the Government of Canada's terminology and linguistic data bank
A product of the Translation Bureau

Display options

Change the order of display of the official languages of Canada
Option to display the non-official languages (Spanish or Portuguese)
Display definitions, contexts, etc., on records

Features

GCtranslate (available on the Government of Canada network only)

Use this artificial intelligence prototype to translate Government of Canada content up to and including Protected B. Available to employees of selected departments and agencies only.

Writing tools

The Language Portal’s writing tools have a new look! Easy to consult, they give you access to a wealth of information that will help you write better in English and French.

Glossaries and vocabularies

Access Translation Bureau glossaries and vocabularies.

Date Modified: