TERMIUM Plus®

From: Translation Bureau

On social media

Consult the Government of Canada’s terminology data bank.

HEAD TABLE [47 records]

Record 1 2025-08-11

English

Subject field(s)
  • Radiography (Medicine)
DEF

A radiographic projection of the cervical or thoracic spine with the patient lying supine on a table, the neck hyperextended, the upper limb nearer the camera parallel to the body, and that nearer the film placed above the head; the central ray enters laterally.

French

Domaine(s)
  • Radiographie (Médecine)
OBS

Incidence de profil pour l'étude de la charnière cervico-dorsale.

Spanish

Campo(s) temático(s)
  • Radiografía (Medicina)
CONT

Si aun así no se consigue ver la charnela cervicodorsal, se puede intentar la 'proyección del nadador' (fig. 17) con un brazo abducido 180 grados, el otro traccionado hacia abajo y pegado al cuerpo, y el tubo de rayos oblicuado 60 grados.

Save record 1

Record 2 2024-09-27

English

Subject field(s)
  • Physiotherapy
DEF

A test used to diagnose benign paroxysmal positional vertigo (BPPV) that consists of a series of head, neck, and body movements that reproduce the vertigo sensation.

CONT

The Dix-Hallpike test is typically performed in a doctor's office. The doctor will ask you to sit upright on an exam table with your legs stretched out in front of you and your head turned to one side. They will then ask you to lower your head and torso back so that you end up lying with your head stretched off the edge of the exam table, turned with one ear down at a 45-degree angle. If there are misplaced calcium deposits(also called canaliths) in the posterior canal of your inner ear, this will trigger vertigo symptoms.

OBS

Benign positional paroxysmal vertigo (BPPV) is one of the most common causes of vertigo. The Dix-Hallpike maneuver is the gold standard test used to diagnose BPPV, which is crucial in confirming posterior canal BPPV.

French

Domaine(s)
  • Physiothérapie
DEF

Manœuvre clinique qui vise à confirmer le diagnostic du vertige paroxystique positionnel bénin (VPPB) en reproduisant le vertige par l'entremise d'une série de mouvements de la tête, du cou et du corps.

CONT

Le diagnostic sera confirmé par la manœuvre de Dix et Hallpike, qui consiste à reproduire le vertige en basculant le patient vers le côté déclenchant (le sujet, assis jambes pendantes au milieu de la table d'examen, est rapidement couché par l'examinateur vers le côté supposé atteint). La manœuvre est positive lorsqu'elle provoque un vertige et/ou des mouvements des yeux (appelés nystagmus) que le médecin va observer.

Spanish

Save record 2

Record 3 2021-12-01

English

Subject field(s)
  • Collection Items (Museums and Heritage)
  • Meats and Meat Industries
  • Seafood and Freshwater Food (Food Industries)
OBS

The table is notched to facilitate the removal of the cod's head, and a small piece of wood is nailed on to brace the split cod when ’’raising the soundbone’’(removing the spine).

French

Domaine(s)
  • Objets de collection (Muséologie et Patrimoine)
  • Salaison, boucherie et charcuterie
  • Produits de mer et d'eau douce (Industr. alim.)

Spanish

Save record 3

Record 4 2017-04-13

English

Subject field(s)
  • Gemmology
  • Diamond Industry
DEF

A main facet on the crown and pavilion that is positioned at the widest dimension of the diamond.

CONT

There can be two or four belly facets.

CONT

List the typical facets of a heart shape... : a) girdle; b) table; 2 head facets; 2 shoulder facets; 2 belly facets; 2 wing facets; 8 stars; 16 halves...

OBS

Oval, pear, heart and marquise cuts.

French

Domaine(s)
  • Gemmologie
  • Industrie diamantaire
DEF

Facette principale sur la couronne et la culasse dans la partie la plus large du diamant.

CONT

Les facettes d'excédent peuvent être au nombre de deux ou de quatre.

OBS

Tailles ovale, poire, cœur et marquise.

Spanish

Save record 4

Record 5 2017-04-12

English

Subject field(s)
  • Gemmology
  • Diamond Industry
DEF

The crown main facet opposite the point facet of the heart and pear shapes.

CONT

List the typical facets of a heart shape(see Figure F 18) : a) girdle; b) table; 2 head facets; 2 shoulder facets; 2 belly facets; 2 wing facets; 8 stars; 16 halves...

French

Domaine(s)
  • Gemmologie
  • Industrie diamantaire
DEF

Facette principale de couronne opposée à la facette de pointe de couronne, d'une taille cœur ou poire.

OBS

Coins de tête de la partie supérieure.

Spanish

Save record 5

Record 6 2017-04-12

English

Subject field(s)
  • Gemmology
  • Diamond Industry
DEF

A crown and pavilion main facet adjacent to the head facet on pear and heart fancy shapes.

CONT

List the typical facets of a heart shape(see Figure F 18) : a) girdle; b) table; 2 head facets; 2 shoulder facets; 2 belly facets; 2 wing facets; 8 stars; 16 halves...

French

Domaine(s)
  • Gemmologie
  • Industrie diamantaire
DEF

Facette principale de couronne et de culasse adjacente à la facette de tête de couronne d'un diamant de taille fantaisie, poire ou cœur.

Spanish

Save record 6

Record 7 2016-03-15

English

Subject field(s)
  • Bowling, Billiards and Other Ball Games
DEF

A spot midway between the center spot and the middle of the head cushion on a carom or pocket billiards table.

French

Domaine(s)
  • Quilles, billards et autres jeux de boules
OBS

mouche : petites rondelles ou petits points noirs fixés en divers endroits sur la table et servant de guides au placement des billes.

CONT

Au jeu du continuel (14.1) les billes sont replacées sur la table seulement lorsque quatorze d'entre elles ont été réussies, la quinzième demeurant à l'endroit où elle s'est arrêtée sur la table. (...) Si la quinzième bille interfère au replacement des quatorze autres dans le triangle, cette dernière bille est placée sur la mouche du haut.

Spanish

Save record 7

Record 8 2015-04-23

English

Subject field(s)
  • Milling (Machine-Tooling)
  • Machine-Tooling (Metallurgy)
CONT

Vertical Milling Machines. The table of this type of machine is mounted on the front of a vertical column in a similar way to that for the horizontal type of machine. The spindle, however, is carried vertically in a head which usually can be raised or lowered on vertical slides attached to the front of the column.

OBS

May refer to any type of milling machine with a vertical spindle.

Key term(s)
  • vertical-spindle mill

French

Domaine(s)
  • Fraisage (Usinage)
  • Usinage (Métallurgie)
CONT

Fraiseuse verticale. Elle est conçue comme la fraiseuse horizontale, à l'exception de la broche, qui est disposée verticalement à la partie supérieure du bâti.

Spanish

Save record 8

Record 9 2015-02-19

English

Subject field(s)
  • Milling (Machine-Tooling)
CONT

Maho universal toolroom milling and boring machines.... Both vertical milling head and overarm support can be moved into the working position without the aid of lifting equipment. Only one universal work table is required for all working positions.

OBS

vertical milling attachment: When machine attachments or modifying devices are referred to, this term is more often used.

French

Domaine(s)
  • Fraisage (Usinage)
CONT

La tête verticale simple [...] permet la transformation pure et simple d'une fraiseuse horizontale en fraiseuse verticale.

OBS

«Appareil fraiseur vertical» était antérieurement emmagasiné en banque comme équivalent de «vertical milling attachment»; son emploi n'a pas pu être vérifié au cours de recherches plus poussées.

OBS

«Tête verticale (simple)» et «tête de fraisage verticale» désignent également la tête en tant que partie intégrée de la machine ou en tant que dispositif amovible.

OBS

dispositif de fraisage vertical : Indiqué comme équivalent de «vertical milling attachment» dans un glossaire multilingue.

Key term(s)
  • appareil fraiseur vertical
  • fraiseuse verticale
  • machine à fraise verticale

Spanish

Save record 9

Record 10 2014-04-11

English

Subject field(s)
  • Plastics Manufacturing
DEF

A platen located between the main head and the press table in a multiplaten press and capable of being moved independently.

OBS

floating platen: term and definition standardized by ISO [International Organization for Standardization].

Key term(s)
  • center platen
  • centre platen
  • center plate
  • centre plate
  • center section
  • centre section

French

Domaine(s)
  • Plasturgie
DEF

Plateau situé entre le plateau supérieur et la table d'une presse, dans une presse à plateaux multiples, et capable de mouvements indépendants.

OBS

plateau mobile : terme et définition normalisés par l'ISO [Organisation internationale de normalisation].

Key term(s)
  • plateau intermédiaire

Spanish

Campo(s) temático(s)
  • Fabricación de plásticos
DEF

Platina localizada entre las placas de la prensa, que se puede mover independientemente.

Save record 10

Record 11 2012-03-06

English

Subject field(s)
  • Diagnostic Procedures (Medicine)
  • The Heart
DEF

The patient supine with the head lowered over the end of the table, the murmur of tricuspid insufficiency being heard more distinctly.

French

Domaine(s)
  • Méthodes diagnostiques (Médecine)
  • Cœur
OBS

Position préconisée pour faciliter l'auscultation du souffle systolique dû à une insuffisance tricuspidienne.

Spanish

Save record 11

Record 12 2011-06-13

English

Subject field(s)
  • Surgery
DEF

A supine position on the operating table, which is inclined at varying angles so that the pelvis is higher than the head with the knees flexed and legs hanging over the end of the table.

French

Domaine(s)
  • Chirurgie
DEF

Position d'un malade en décubitus dorsal, tête plus bas que les pieds, utilisée en chirurgie gynécologique ou digestive.

Spanish

Save record 12

Record 13 2011-05-09

English

Subject field(s)
  • Radiography (Medicine)
  • Musculoskeletal System
DEF

A superoinferior projection of the sternoclavicular joint especially used for a dislocation of that joint. While standing the patient bends over end of x-ray table and cassette with hands on head, neck parallel to table, and chest about 45° to table. The x-ray beam is vertical to the cassette.

French

Domaine(s)
  • Radiographie (Médecine)
  • Appareil locomoteur (Médecine)
DEF

Incidence cranio-podale utilisée surtout dans les luxations de l'articulation sterno-claviculaire. Le patient est penché sur la table au-dessus de la cassette, les mains sur la tête, le cou parallèle à la table, le thorax formant un angle de 45° avec celle-ci. Le rayon est vertical à la cassette.

Spanish

Save record 13

Record 14 2009-01-27

English

Subject field(s)
  • Hydrology and Hydrography
  • Geology
DEF

The upper confining bed of an aquifer whose head is above the upper surface of the zone of saturation; i. e., above the water table.

French

Domaine(s)
  • Hydrologie et hydrographie
  • Géologie

Spanish

Save record 14

Record 15 2007-01-19

English

Subject field(s)
  • Industrial Tools and Equipment
  • Diamond Industry
CONT

Describe a single-head manual bruting machine : a) a small lathe-like machine mounted on a table; b) components include :-body;-shaft, with a bruting head assembly : can be set off-centre;-flywheel;-dust pan;-drive pulley;-bruting head;-dop;-bruter's block;-cradle.

OBS

Part of a bruting machine.

Key term(s)
  • bruting machine body

French

Domaine(s)
  • Outillage industriel
  • Industrie diamantaire
OBS

Partie d'une machine de débrutage.

Spanish

Save record 15

Record 16 2007-01-19

English

Subject field(s)
  • Gemmology
  • Diamond Industry
DEF

An adjustable steel block used in manual bruting to position the cradle.

CONT

Describe a single-head manual bruting machine : a) a small lathe-like machine mounted on a table; b) components include :-body;-shaft, with a bruting head assembly : can be set off-centre;-flywheel;-dust pan;-drive pulley;-bruting head;-dop;-bruter's block;-cradle.

Key term(s)
  • bruter block

French

Domaine(s)
  • Gemmologie
  • Industrie diamantaire
DEF

Bloc d'acier réglable en hauteur, placé sous l'appui, utilisé pour le débrutage manuel.

Spanish

Save record 16

Record 17 2007-01-19

English

Subject field(s)
  • Industrial Tools and Equipment
  • Diamond Industry
CONT

Describe a single-head manual bruting machine : a) a small lathe-like machine mounted on a table; b) components include :-body;-shaft, with a bruting head assembly : can be set off-centre;-flywheel;-dust pan;-drive pulley;-bruting head;-dop;-bruter's block;-cradle.

CONT

Bruter’s hammer: A small brass mallet or hammer used for centring the bruting machine head.

French

Domaine(s)
  • Outillage industriel
  • Industrie diamantaire
OBS

Partie d'une machine de débrutage.

Spanish

Save record 17

Record 18 2004-06-21

English

Subject field(s)
  • Industrial Tools and Equipment
  • Diamond Industry
CONT

Describe a single-head manual bruting machine : a) a small lathe-like machine mounted on a table; b) components include :-body;-shaft, with a bruting head assembly : can be set off-centre;-flywheel;-dust pan;-drive pulley;-bruting head;-dop;-bruter's block;-cradle.

OBS

Diamond Powder Recovery: A tray with sieve is situated conveniently beneath the chuck to catch the diamond chips caused by bruting. As this tray does not collect all the chips, especially the finer dust, a vacuum cleaner is used to suck it up.

French

Domaine(s)
  • Outillage industriel
  • Industrie diamantaire
OBS

La poussière de diamant qui s'échappe au fur et à mesure du travail, est aspirée et soigneusement recueillie dans un petit réservoir.

OBS

Partie d'une machine de débrutage.

Spanish

Save record 18

Record 19 2004-06-21

English

Subject field(s)
  • Industrial Tools and Equipment
  • Diamond Industry
CONT

Describe a single-head manual bruting machine : a) a small lathe-like machine mounted on a table; b) components include :-body;-shaft, with a bruting head assembly : can be set off-centre;-flywheel;-dust pan;-drive pulley;-bruting head;-dop;-bruter's block;-cradle.

OBS

Part of a bruting machine.

French

Domaine(s)
  • Outillage industriel
  • Industrie diamantaire
OBS

Partie d'une machine de débrutage.

Spanish

Save record 19

Record 20 2004-06-21

English

Subject field(s)
  • Industrial Tools and Equipment
  • Diamond Industry
CONT

Describe a single-head manual bruting machine : a) a small lathe-like machine mounted on a table; b) components include :-body;-shaft, with a bruting head assembly : can be set off-centre;-flywheel;-dust pan;-drive pulley;-bruting head;-dop;-bruter's block;-cradle.

OBS

The bruting machine can be mounted on an individual work table or in series on benches.... There are two kinds of bruting machines : the machine with a single axle also called single-head machine, and the machine with two axles, double-head machines, which are main used for small sawn goods.

French

Domaine(s)
  • Outillage industriel
  • Industrie diamantaire
CONT

Aujourd'hui on utilise une machine à débruter, c'est-à-dire un tour de précision entraîné par un moteur et muni d'un variateur de vitesse pour la taille des grosses pierres. [...] Il existe deux types de machines à débruter : celles à tête unique (à un axe) et celles à double têtes (deux axes) que l'on utilise pour les petites pierres.

Spanish

Save record 20

Record 21 2004-04-28

English

Subject field(s)
  • Industrial Tools and Equipment
  • Diamond Industry
DEF

For sawing, lasering and bruting: the holder in/on which the diamond is put to be processed; may be hollow or flat.

CONT

Describe a single-head manual bruting machine : a) a small lathe-like machine mounted on a table; b) components include :-body;-shaft, with a bruting head assembly : can be set off-centre;-flywheel;-dust pan;-drive pulley;-bruting head;-dop;-bruter's block;-cradle.

OBS

The instrument in which the stone is cemented for bruting is also known as a dop, as are the wood or metal rods to which the colored stones are affixed for cutting.

French

Domaine(s)
  • Outillage industriel
  • Industrie diamantaire
DEF

Pour les opérations de sciage, de débrutage et de taille au laser, support plan ou creux du diamant.

Spanish

Save record 21

Record 22 2004-04-05

English

Subject field(s)
  • Boring (Machine-Tooling)
  • Machine-Tooling (Metallurgy)
CONT

... the principal components of the table-type horizontal boring, drilling, and milling machine are the spindle, spindle sleeve, headstock, column, column base, bed, saddle, table, end support, and end support base.

OBS

Table type. In machines of this type ... the table feeds horizontally on saddle ways both parallel with and at right angles to the spindle axis.

PHR

Traversing spindle with facing head, traversing spindle without facing head, facing head type without traversing spindle table type boring and milling machine.

Key term(s)
  • table-type boring and milling machine
  • table-type horizontal boring mill

French

Domaine(s)
  • Alésage (Usinage)
  • Usinage (Métallurgie)
OBS

Machines à montant fixe [...]. Dans ce type de machine, le montant du chariot porte-broche est solidaire du banc [...]. Les mouvements d'avance [comprennent les] mouvements longitudinal, transversal et, éventuellement, rotatif de la table porte-pièces.

OBS

machine à aléser et à fraiser à montant fixe : Extrait de la norme NF-E60-000 reproduite avec l'autorisation de l'AFNOR.

PHR

Machine à aléser et à fraiser à montant fixe à broche coulissante avec plateau de surfaçage, à broche coulissante sans plateau de surfaçage, à broche non coulissante, avec plateau de surfaçage.

Key term(s)
  • fraiseuse aléseuse à montant fixe

Spanish

Save record 22

Record 23 2004-04-05

English

Subject field(s)
  • Precision Grinding
DEF

A grinding machine having a swivel table and headstock, and a wheel head that can be rotated on its base.

French

Domaine(s)
  • Rectification (Usinage)
OBS

machine à rectifier universelle : Extrait de la norme NF-E60-000 reproduite avec l'autorisation de l'AFNOR.

Spanish

Save record 23

Record 24 2004-03-18

English

Subject field(s)
  • Orbital Stations
CONT

Shake, Rattle & Roll Poster.... Rattle :... Even though there are no sounds in the vacuum of space, it is very noisy inside the International Space Station. A lot of the noise comes from the rattling and creaking of fans and events. Student Activity : Acquire a large, clean empty cardboard box(top or bottom removed), big enough to fit easily and comfortably over a person's head, leaving ample room for ventilation. Sit the box on the floor or table, open side down, and tap or scratch lightly on the outside of the box using only your hands. Next, place the box over your head and repeat the procedure. Comment on the loudness of the sounds you hear. Relate this to conditions inside the International Space Station. Student Challenge : Acquire a simple, inexpensive household fan. Develop a method to reduce the amount of noise produced by the fan without reducing the airflow.

French

Domaine(s)
  • Stations orbitales
CONT

Affiche «Rock'n'roll spatial». [...] Bruits : [...] Même si les sons ne se propagent pas dans le vide spatial, l'intérieur de la Station spatiale internationale est très bruyant. Bon nombre de ces bruits viennent des cliquetis et des craquements des ventilateurs et des évents d'aération. Activité de l'élève : Prenez une grande boîte de carton propre et vide (parties supérieure et inférieure enlevées) et dont les dimensions sont suffisamment grandes pour pouvoir y passer la tête et laisser amplement de place pour la ventilation. Placez la boîte sur le plancher ou sur une table, côté ouvert vers le bas, et frappez ou grattez légèrement du bout du doigt la partie extérieure de la boîte. Placez ensuite la boîte sur votre tête et refaites les mêmes bruits. Décrivez l'intensité des sons que vous entendez. Faites enfin le lien entre l'expérience que vous venez d'effectuer et les conditions qui règnent à l'intérieur de la Station spatiale internationale. Défi : Utilisez un simple petit ventilateur maison peu coûteux. Trouvez une méthode qui permettra de réduire le bruit produit par le ventilateur sans pour autant diminuer le débit d'air.

Spanish

Save record 24

Record 25 2002-10-31

English

Subject field(s)
  • Scientific Measurements and Analyses
  • Hydrology and Hydrography
  • Soil Mechanics (Engineering)
DEF

Observation well in which the water table level or the piezometric head can be measured.

French

Domaine(s)
  • Mesures et analyse (Sciences)
  • Hydrologie et hydrographie
  • Mécanique des sols
DEF

Puits d'observation dans lequel on peut mesurer le niveau de la nappe ou la charge piézométrique.

Spanish

Campo(s) temático(s)
  • Medición y análisis (Ciencias)
  • Hidrología e hidrografía
  • Mecánica del suelo
DEF

Pozo de observación en el que se pueden medir el nivel freático o la altura piezométrica.

Save record 25

Record 26 2002-03-08

English

Subject field(s)
  • Drilling (Machine-Tooling)
DEF

A drilling machine in which a vertical drill moves into the work, which is stationary.

CONT

A drill press is preferable to a hand drill when the location and orientation of the hole must be controlled accurately. A drill press is composed of a base that supports a column, the column in turn supports a table. Work can be supported on the table with a vise or hold down clamps, or the table can be swiveled out of the way to allow tall work to be supported directly on the base. Height of the table can be adjusted with a table lift crank than locked in place with a table lock. The column also supports a head containing a motro. The motor turns the spindle at a speed controlled by a variable speed control dial. The spindle holds a drill chuck to hold the cutting tools(drill bits, center drills, deburring tools, etc.). [An illustration follows. ]

French

Domaine(s)
  • Perçage (Usinage)
CONT

perceuse à colonne : [...] Elles ont la possibilité d'effectuer le perçage d'éléments les plus variés, unitairement ou en série, avec des outillages appropriés. [...] Une table porte-pièce peut coulisser, s'orienter et se bloquer sur cette colonne.

Spanish

Save record 26

Record 27 2002-01-30

English

Subject field(s)
  • Facilities and Equipment (Wood Industries)
  • Wood Sawing
DEF

A head saw(circular or band) with a travelling table operated by rack-and-pinion, manually or by power.

French

Domaine(s)
  • Installations et équipement (Industr. du bois)
  • Sciage du bois
DEF

Scie à lame circulaire ou à ruban, comportant un chariot mû par un ensemble de crémaillère et de pignons, manuellement ou mécaniquement.

Spanish

Campo(s) temático(s)
  • Instalaciones y equipo (Industria maderera)
  • Aserradura de la madera
Save record 27

Record 28 2001-04-01

English

Subject field(s)
  • Astronautics
CONT

Two 160 kN shakers which can either be used individually for testing subsystems or in multishaker configuration to enlarge the capacity of the facility. In the latter configuration, the two shakers are coupled to a dual head expander for tests in the vertical axis and to a large slip table for tests in horizontal direction.

French

Domaine(s)
  • Astronautique
DEF

Dispositif servant à propager les vibrations de l'excitateur dans toute l'éprouvette.

Spanish

Save record 28

Record 29 2001-03-01

English

Subject field(s)
  • Surgery
DEF

The patient lying on his back on a table with his head hanging over the end and hyperextended so that a line from the chin to the external auditory meatus is vertical.

French

Domaine(s)
  • Chirurgie

Spanish

Save record 29

Record 30 1999-11-30

English

Subject field(s)
  • Geological and Other Scientific Names
OBS

A same designation could refer to a geographic or a geologic entity, sometimes with a slight variant in spelling or writing. It is important to distinguish one from the other and write each correctly according to the given context.

OBS

In western Newfoundland, Lower and early Middle Ordovician sedimentary and volcanic rocks form the upper parts of two klippen that rest on early Middle Ordovician limestone and black shale of the Table Head Formation.

French

Domaine(s)
  • Noms géologiques ou scientifiques
OBS

La règle concernant la majuscule au générique d'un nom géologique demeure imprécise. Habituellement, les noms de divisions stratigraphiques portent la majuscule et les entités de moindre importance n'en portent pas.

OBS

Une même désignation peut se référer à une entité géographique et à une entité géologique, parfois avec une légère variante. Il importe de bien distinguer l'une de l'autre et d'utiliser la graphie correcte selon le contexte.

OBS

Dans la partie occidentale de Terre-Neuve, des roches sédimentaires et volcaniques de l'Ordovicien inférieur et du début de l'Ordovicien moyen forment les parties supérieures de deux klippen sus-jacents au calcaire et au schiste argileux noir de la formation de Table Head du début de l'Ordovicien moyen.

Spanish

Save record 30

Record 31 1999-09-03

English

Subject field(s)
  • Geological and Other Scientific Names
OBS

A same designation could refer to a geographic or a geologic entity, sometimes with a slight variant in spelling or writing. It is important to distinguish one from the other and write each correctly according to the given context.

OBS

In Canada Bay on northern Great Northern Peninsula, the Bide Arm and Englee Formation are largely correlative with the Table Head Formation.

French

Domaine(s)
  • Noms géologiques ou scientifiques
OBS

La règle concernant la majuscule au générique d'un nom géologique demeure imprécise. Habituellement, les noms de divisions stratigraphiques portent la majuscule et les entités de moindre importance n'en portent pas.

OBS

Une même désignation peut se référer à une entité géographique et à une entité géologique, parfois avec une légère variante. Il importe de bien distinguer l'une de l'autre et d'utiliser la graphie correcte selon le contexte.

OBS

Dans la baie Canada, dans le nord de la péninsule Great Northern, les formations de Bide Arm et d'Englee sont en grande partie corrélatives à la formation de Table Head.

Spanish

Save record 31

Record 32 1998-06-22

English

Subject field(s)
  • Plastics Manufacturing
  • Presses (Machinery)
DEF

The upper structure of a vertical hydraulic press. In an upstroke press, the main head carries a fixed table or platen, whereas in a downstroke press, it carries the cylinder casting and ram.

OBS

main head: term standardized by ISO.

Key term(s)
  • upper platen
  • upper plate
  • top plate
  • top platen

French

Domaine(s)
  • Plasturgie
  • Presses (Machines)
CONT

Plateau mobile : Dans une presse à plateaux multiples, plateau situé entre le plateau supérieur et la table de presse, dont le mouvement est indépendant.

OBS

plateau supérieur; corps de presse : termes normalisés par l'ISO.

Spanish

Save record 32

Record 33 1994-03-05

English

Subject field(s)
  • Physiotherapy
CONT

front lunge : hand on to a chair or table with one hand for balance; keep your upper body and head well aligned straight up and down; take a deep breath in; as you breath out, take one step forward and begin lowering your body until your forward thigh is parallel to the floor(the angle between your lower leg and thigh should be 90 degrees) ;your other leg should be stretched out to the back so that your knee almost touches the floor;

French

Domaine(s)
  • Physiothérapie
CONT

Le kinésithérapeute apprend ensuite au blessé à passer de la position couchée à la position debout de façon autonome. Deux variantes peuvent être employées. - À partir du décubitus ventral [...] - À partir du décubitus latéral [...] Dès que l'autonomie des transferts est acquise, le périmètre de marche est augmenté. Puis le kinésithérapeute aborde les exercices de descente au sol : fentes avant, arrière, position chevalier servant, en veillant au bon verrouillage du tronc.

Spanish

Save record 33

Record 34 1992-09-16

English

Subject field(s)
  • Radiography (Medicine)
  • Musculoskeletal System
DEF

A tangential view of the posterior lateral surface of the humeral head. The patient is placed supine on the examination table with the cassette under the shoulder, and the palm of the hand of the affected shoulder is placed on top of the head. The elbow then points straight upward. The central beam is centered over the coracoid process with 10 [degrees) 0 cephalic tilt. Used to visualize the Hill-Sachs lesion in anterior dislocation of the shoulder. [From RSKEL, 1982, p. 421. ]

French

Domaine(s)
  • Radiographie (Médecine)
  • Appareil locomoteur (Médecine)
DEF

Incidence tangentielle de la surface articulaire postéro-externe de la tête humérale. Le patient est en décubitus, la cassette sous l'épaule et la main sur la tête de manière à ce que le coude pointe vers le haut. Le rayon directeur, incliné de 10 ° en direction de la tête, est centré sur l'apophyse coracoïde. Cette incidence permet de visualiser la lésion de Hill-Sachs dans une luxation antérieure de l'épaule.

Spanish

Save record 34

Record 35 1992-09-16

English

Subject field(s)
  • Radiography (Medicine)
  • Musculoskeletal System
DEF

A projection used to evaluate the elbow joint. The patient is seated at the side of the radiographic table, with the forearm resting on its ulnar side, the elbow joint flexed 90°, and the thumb pointing upward. The central beam is directed toward the radial head at a 45° angle to the forearm. The film in this projection shows the radial head projected ventral, free of overlap by the coronoid process, which is also well demonstrated. This projection is also effective in evaluating the capitellum and humeroradial and humeroulnar articulations. [From GARTH, 1990, pp. 1. 11, 1. 13. ]

French

Domaine(s)
  • Radiographie (Médecine)
  • Appareil locomoteur (Médecine)
DEF

Incidence de profil du coude. Le sujet est assis, coude fléchi à 90° sur la table, pouce en l'air. L'épaule et le coude sont sur le même plan horizontal. Le rayon incident est centré sur l'articulation du coude; le tube est incliné à 45° vers l'épaule, dans l'axe du bras. Il en résulte une projection ventrale de la tête radiale qui est débarrassée de toute superposition avec le cubitus; le capitellum est également bien dégagé. L'intérêt de cette incidence est donc de déceler dans certains cas des fractures de la tête radiale, du capitellum et de l'apophyse coronoïde non visibles sur les autres clichés. [D'après EMSQU, 31018, A10, 1986, p. 2 et JORAA, 1986, t. 67, n° 5, p. 440.]

OBS

source c : EMSQU, 31018, A10, 1986, p. 2.

Spanish

Save record 35

Record 36 1992-07-02

English

Subject field(s)
  • Facilities and Equipment (Wood Industries)
  • Finish Carpentry (Wood Industries)
OBS

Two-, three- and four-side moulding machine.

French

Domaine(s)
  • Installations et équipement (Industr. du bois)
  • Menuiserie (Industr. du bois)
OBS

Machine à moulurer sur deux, trois, quatre faces.

Spanish

Save record 36

Record 37 1992-07-02

English

Subject field(s)
  • Facilities and Equipment (Wood Industries)
  • Finish Carpentry (Wood Industries)
OBS

Two-, three- and four-side moulding machine.

French

Domaine(s)
  • Installations et équipement (Industr. du bois)
  • Menuiserie (Industr. du bois)
OBS

Machine à moulurer sur deux, trois, quatre faces.

Spanish

Save record 37

Record 38 1992-07-02

English

Subject field(s)
  • Facilities and Equipment (Wood Industries)
  • Finish Carpentry (Wood Industries)
OBS

Two-, three- and four-side moulding machine.

French

Domaine(s)
  • Installations et équipement (Industr. du bois)
  • Menuiserie (Industr. du bois)
OBS

Machine à moulurer sur deux, trois, quatre faces.

Spanish

Save record 38

Record 39 1991-10-14

English

Subject field(s)
  • Statistical Surveys
DEF

A table which consists of four major parts : heading, box head, stub and field.

French

Domaine(s)
  • Sondages et enquêtes (Statistique)
DEF

Tableau qui comprend quatre grandes parties, soit la vedette, le titre encadré,m la colonne de titres et la zone.

Spanish

Save record 39

Record 40 1991-10-07

English

Subject field(s)
  • Quantum Statistics
DEF

Portion of a table which is similar to the banner head but does not cover the entire box head.

French

Domaine(s)
  • Statistique quantique
DEF

Partie d'un tableau qui est similaire à la bannière, mais qui couvre une partie seulement du titre encadré.

Spanish

Save record 40

Record 41 1988-01-06

English

Subject field(s)
  • Layout (Graphic Arts)
DEF

A head that is centered over two or more columns, such as a table head that applies to several column heads.

French

Domaine(s)
  • Maquette et mise en page

Spanish

Save record 41

Record 42 1987-11-26

English

Subject field(s)
  • Drilling (Machine-Tooling)
CONT

Gang drills are drilling machines equipped with more than one work or drilling head mounted on a single table. They are used when several operations must be performed on a single job; for example, a drill, reamer, and tap may be mounted on successive spindles so that the work may be advanced quickly from one operation to the next.

French

Domaine(s)
  • Perçage (Usinage)

Spanish

Save record 42

Record 43 1986-12-17

English

Subject field(s)
  • Medical Instruments and Devices
CONT

Examining table. Hinged leg and head extensions adjustable to any angle. Sliding instrument tray extends outward from either side of table.

French

Domaine(s)
  • Instruments et appareillages médicaux
CONT

Table d'examen. permettant toutes positions, allongée, assise, [etc...]

Spanish

Save record 43

Record 44 1985-07-31

English

Subject field(s)
  • Meetings and Assemblies (Administration)
  • Banquets and Receptions
CONT

The plan ... shows the seating arrangements for a formal luncheon ... There were 48 tables each seating eight people, with a top table for 36 - over 400.

CONT

Places are reserved at the top table for the chairman and distinguished guests. Name cards are prepared and a list, in order of seating, placing the speaker on the right of the chairman. Places are also reserved for the press. Those concerned are notified of these top table arrangements by the simple expedient of pinning a note to their badges.

French

Domaine(s)
  • Réunions et assemblées (Administration)
  • Réceptions et banquets
DEF

Table placée bien en vue des convives et réservée aux personnalités assistant à un banquet.

Spanish

Save record 44

Record 45 1980-04-25

English

Subject field(s)
  • Milling (Machine-Tooling)
CONT

Model 3 UM, bed-type universal miller features a duplex swivel-spindle head that permits more economical horizontal and vertical milling jobs. The swivel heads can be turned to any desired angle for application versatility.

OBS

May refer to machines with universal head, as in the context above, to machines with optional vertical or horizontal spindle orientation, or to machines with swivelling table(as in HIMAC 1971, p. 325).

French

Domaine(s)
  • Fraisage (Usinage)
CONT

Fraiseuse universelle. Elle ressemble beaucoup à la fraiseuse verticale, dont elle dérive, mais elle comporte en plus soit une tête orientable en toute direction, appelée tête universelle, soit un chariot orientable et pivotant.

OBS

Dans le cas des fraiseuses à chariot orientable et pivotant, mais non dans le cas de fraiseuses à tête universelle (ou à orientation facultative de broche en horizontal ou en vertical,) ces machines sont normalement qualifiées plus spécifiquement selon l'orientation de la broche, p. ex. "fraiseuse horizontale universelle" dans DOUFR-F 1964, p. 23.

Key term(s)
  • machine à fraiser universelle
  • appareil fraiseur universel

Spanish

Save record 45

Record 46 1976-06-19

English

Subject field(s)
  • Various Sports

French

Domaine(s)
  • Sports divers
OBS

Billard

Spanish

Save record 46

Record 47 1975-03-11

English

Subject field(s)
  • Photography
CONT

The camera must be attached firmly to the tripod or stand and... there is always a plate or table with an attaching screw.... The... most popular tripod heads... are the... ball and socket head and the pan and tilt head.

French

Domaine(s)
  • Photographie
DEF

Petit plateau surmontant le trépied, et sur lequel est fixé l'appareil photographique, au moyen d'un écrou d'attache ou d'une vis de fixation.

Spanish

Save record 47

Copyright notice for the TERMIUM Plus® data bank

© Public Services and Procurement Canada, 2026
TERMIUM Plus®, the Government of Canada's terminology and linguistic data bank
A product of the Translation Bureau

Features

GCtranslate (available on the Government of Canada network only)

Use this artificial intelligence prototype to translate Government of Canada content up to and including Protected B. Available to employees of selected departments and agencies only.

Writing tools

The Language Portal’s writing tools have a new look! Easy to consult, they give you access to a wealth of information that will help you write better in English and French.

Glossaries and vocabularies

Access Translation Bureau glossaries and vocabularies.

Date Modified: