TERMIUM Plus®

From: Translation Bureau

On social media

Consult the Government of Canada’s terminology data bank.

HEAD TANK [29 records]

Record 1 2016-08-11

English

Subject field(s)
  • Rolling Stock (Railroads)
  • Railroad Safety
  • Freight Service (Rail Transport)
CONT

None of the tank cars were equipped with head shields, jackets, or thermal protection.

French

Domaine(s)
  • Matériel roulant (Chemins de fer)
  • Sécurité (Transport par rail)
  • Trafic marchandises (Transport par rail)
CONT

Aucun des wagons-citernes n’était muni d’un bouclier protecteur, d’une enveloppe extérieure, ni d’une protection thermique.

Spanish

Save record 1

Record 2 2016-03-11

English

Subject field(s)
  • Rolling Stock (Railroads)
  • Freight Service (Rail Transport)
CONT

This failure rate again demonstrates the poor performance in derailments of general-service Class 111 tank cars that are built to minimum requirements, and highlights the inability of these tank cars to withstand accident forces. Commodities posing significant risk must be shipped in safe containers, which include defences such as stronger tank shells, tank car jackets, full-height head shields, thermal protection, and high-capacity PRDs [pressure relief devices].

French

Domaine(s)
  • Matériel roulant (Chemins de fer)
  • Trafic marchandises (Transport par rail)

Spanish

Save record 2

Record 3 2016-03-10

English

Subject field(s)
  • Rolling Stock (Railroads)
CONT

The majority of the tank cars exhibited impact damage... on the top portion of at least [one] head. This is not unexpected, as most of these cars came to rest on their sides, thereby bringing the top portion of the heads closer to the ground and increasing the probability of impacts with objects such as rail, couplers, and body bolsters. A full-head shield would have been beneficial, as half-head shields protect only the bottom portion of the head.

French

Domaine(s)
  • Matériel roulant (Chemins de fer)
CONT

La majorité des wagons-citernes montraient des signes de dommages attribuables aux chocs [...] à la partie supérieure d’au moins [une] tête. Cela n’a rien d’inattendu puisque la plupart de ces wagons s’étaient immobilisés sur le côté, ce qui a rapproché la partie supérieure des têtes du sol et a augmenté la probabilité de heurts avec des objets tels que des rails, des attelages et des traverses pivots. Un bouclier protecteur complet se serait avéré utile, puisque les demi-boucliers ne protègent que la partie inférieure de la tête.

Spanish

Save record 3

Record 4 2011-06-01

English

Subject field(s)
  • General Hardware
  • Paints and Varnishes (Industries)
CONT

A pressure-feed gun has an air cap not designed to create a vacuum. Material is forced to the spray head by pressure from a tank or pump.

OBS

pressure feed gun: term officially approved by the Lexicon Project Committee (New Brunswick).

French

Domaine(s)
  • Quincaillerie générale
  • Peintures et vernis (Industries)
OBS

On utilise des pistolets à godet supérieur ou à gravitation (...), des pistolets à godet suspendu (à aspiration), ou des pistolets sans godet, alimentés directement par un réservoir sous pression d'air au moyen d'un tuyau de plastique.

OBS

pistolet à alimentation par pression : terme uniformisé par le Comité du projet de lexiques (Nouveau-Brunswick).

Spanish

Save record 4

Record 5 - external organization data 2006-01-25

English

Subject field(s)
  • Nuclear Fission Reactors
  • Compartment - Canadian Nuclear Safety Commission
CONT

A head tank helps maintain a full calandria in the system without dump. The cover gas fills ducts above the calandria.

French

Domaine(s)
  • Réacteurs nucléaires de fission
  • Tiroir - Commission canadienne de sûreté nucléaire
CONT

Un réservoir de tête permet de maintenir un plein niveau dans la calandre du circuit sans drainage. Le gaz de couverture remplit les conduites au-dessus de la calandre.

Spanish

Save record 5

Record 6 2005-09-07

English

Subject field(s)
  • Mining of Organic Materials
  • Processing of Mineral Products
  • Mining Equipment and Tools
  • Mineral Processing (Metallurgy)
DEF

Any tank or vessel in the water circuit which is used to control the delivery pressure of the water to the washing units. [Definition standardized by ISO.]

OBS

head tank : term standardized by ISO.

French

Domaine(s)
  • Exploitation de matières organiques (Mines)
  • Préparation des produits miniers
  • Outillage et équipement (Exploitation minière)
  • Minéralurgie (Métallurgie)
DEF

Tout réservoir placé dans le circuit de circulation de l'eau, employé pour assurer une pression donnée de l'eau d'alimentation des appareils de lavage. [Définition normalisée par l'ISO.]

OBS

bâche de tête : terme normalisé par l'ISO.

Spanish

Save record 6

Record 7 - external organization data 2005-08-18

English

Subject field(s)
  • Chemistry
  • Nuclear Fission Reactors
  • Compartment - Canadian Nuclear Safety Commission
CONT

High-pressure cylinders supply makeup helium through a helium addition line connected to piping into the head tank.

French

Domaine(s)
  • Chimie
  • Réacteurs nucléaires de fission
  • Tiroir - Commission canadienne de sûreté nucléaire
CONT

Des cylindres à haute pression fournissent de l'hélium d'appoint au moyen d'une conduite d'addition d'hélium raccordée aux conduites dans le réservoir de tête.

Spanish

Save record 7

Record 8 2002-11-19

English

Subject field(s)
  • Industrial Tools and Equipment
  • Brewing and Malting
CONT

A sparge arm is another worthwhile brewery option. Although it does not actually save time, it does decrease the amount of effort you must spend pouring sparge water into the lauter tun. A sparge arm can be purchased ready-made, improvised from a shower head, or fabricated at home. One simple design is a perforated copper loop that lies on top of the grain in the lauter tun. It is connected to the hot liquor tank by food-grade tubing, and you control the flow of water from the hot liquor tank using a ball valve. Water is run through the copper loop onto the grain bed at a rate about equal to the rate of wort leaving the tun.

French

Domaine(s)
  • Outillage industriel
  • Brasserie et malterie

Spanish

Save record 8

Record 9 1999-10-15

English

Subject field(s)
  • Scientific Measurements and Analyses
  • Fluid Mechanics and Hydraulics (Physics)
  • Soil Mechanics (Engineering)
CONT

Filter Fabric Soil Retention Test.... a laboratory test to evaluate the ability of filter fabrics to act as silt curtains or fences. The test apparatus consists of two plastic tanks... with one end of each tank being open and capable of holding the fabric to be tested in a fixed and vertical position. One tank is filled with water and given a dry weight of soil from the site of the proposed construction. After a prescribed mixing procedure the soil-water suspension is allowed to pass through the fabric separating the two tanks. Hydrometer analyses are used to evaluate the weight of soil in each tank and thereby the percent of soil passing the fabric. Head differentials allow for calculation of the velocities involved for repeated trials.

French

Domaine(s)
  • Mesures et analyse (Sciences)
  • Mécanique des fluides et hydraulique (Physique)
  • Mécanique des sols
OBS

Hydrométrique: qui appartient à l'hydrométrie.

OBS

Hydrométrie: Science étudiant tout ce qui a rapport à l'eau. Art de se servir d'un hydromètre.

OBS

Hydromètre: Nom donné à tout instrument qui sert à effectuer une mesure où intervient l'eau.

Spanish

Save record 9

Record 10 1998-07-15

English

Subject field(s)
  • Plastics Manufacturing
CONT

The accumulator head is considered a subcategory of intermittent extrusion blow molding. It is the combination of an extrusion head with a first in/first out tubular ram melt accumulator.

CONT

Blow-molded Volkswagen fuel tank made of high molecular weight polyethylene. Equipment is Krupp-Kautex Model KB250-S120 with 120 mm extruder and 75 kg accumulator head.

CONT

Melt from the extruder enters the accumulator head from the side and flows around a mandrel; ...

French

Domaine(s)
  • Plasturgie
CONT

[...] en extrusion discontinue de paraison, on utilise des têtes à accumulation et des têtes à variation d'épaisseur de paraison [...]

Spanish

Campo(s) temático(s)
  • Fabricación de plásticos
Save record 10

Record 11 1997-11-04

English

Subject field(s)
  • Plastics Manufacturing
CONT

A variation on ram accumulators that provides first-in, first-out material flow is the accumulator head machine.

CONT

Figure 82. 1 shows a fuel tank being molded on an accumulator head machine. Blow-molded Volkswagen fuel tank made of high molecular weight polyethylene. Equipment is Krupp-Kautex Model KB250-S120 with 120 mm extruder and 75 kg accumulator head.

French

Domaine(s)
  • Plasturgie

Spanish

Save record 11

Record 12 1993-10-04

English

Subject field(s)
  • Papermaking Machines
  • Paper Manufacturing Processes
CONT

To ensure a uniform dispersion to the headbox, the stock is fed from a constant head tank(called the "stuff box"), through a control valve(called the "basis weight valve"), and is usually introduced axially into the suction line of the fan pump....

French

Domaine(s)
  • Machines à papier
  • Fabrication du papier
CONT

Pour assurer une répartition uniforme dans la caisse d'arrivée, on alimente cette dernière avec une suspension provenant d'un réservoir à niveau constant (appelé «cuvier de pâte»), qui traverse une vanne appelée «vanne de grammage»; l'arrivée de pâte dans la pompe de mélange se fait normalement dans l'axe de la pompe [...]

Spanish

Save record 12

Record 13 1993-09-28

English

Subject field(s)
  • Papermaking Machines
DEF

An enclosed tank at the wet end of a paper machine in which the head or level of the stock is regulated by loading it with air or applying vacuum to provide uniform flow on the paper machine wire.

French

Domaine(s)
  • Machines à papier
DEF

Type de caisse d'arrivée fermée où la vitesse du jet est fonction de la pression résultant du niveau de la pâte et de celle exercée par l'air sur la pâte.

OBS

L'expression «caisse d'arrivée pressurisée» est impropre du fait qu'en français, le participe passé pressurisé ne peut qualifier qu'une enceinte maintenue à la pression atmosphérique.

Key term(s)
  • caisse pressurisée
  • caisse d'arrivée pressurisée

Spanish

Save record 13

Record 14 1993-08-30

English

Subject field(s)
  • Papermaking Machines
  • Pulp Preparation (papermaking)
DEF

A compartment in a stock-metering box used on some paper machines to ration out enough furnish supply to the wet end and return the excess to the machine storage chest over a constant head baffle, to meet the required sheet weight being made.

French

Domaine(s)
  • Machines à papier
  • Préparation de la pâte à papier
CONT

(Dosage et mélange des constituants) [...] Le cuvier de tête de machine contient généralement le mélange final, bien que, dans certains cas, de petites quantités d'adjuvants soient ajoutées juste avant la caisse d'arrivée. La suspension du cuvier de tête de machine passe dans une caisse à niveau constant (château de pâte) qui alimente le répartiteur de la machine à papier par l'intermédiaire d'une vanne de régulation (la vanne de grammage). La suspension (d'une concentration de 2,6 à 2,8 %) y est mélangée à des eaux blanches de la fosse sous toile et la concentration est abaissée jusqu'au degré voulu en caisse d'arrivée (d'ordinaire de 0,5 à 1,0 % de concentration).

Spanish

Save record 14

Record 15 1993-08-30

English

Subject field(s)
  • Papermaking Machines
CONT

((Metering and blending of furnishes)) The machine chest typically contains the final furnish mixture, although in some instances, small concentrations of additives may be added just prior to the headbox. The machine chest stock(at 2. 6-2. 8 % consistency) is continuously circulated to a constant head tank(stuff box) which feeds the stock through a control valve(called the "basis weight valve") into the paper machine approach system. Here, the stock is combined with circulating white water from the wire pit, and the consistency is dramatically reduced to the level(typically 1 % or less) required at the headbox.

French

Domaine(s)
  • Machines à papier
CONT

((Dosage et mélange des constituants)). Le cuvier de tête de machine contient généralement le mélange final, bien que, dans certains cas, de petites quantités d'adjuvants soient ajoutées juste avant la caisse d'arrivée. La suspension du cuvier de tête de machine passe dans une caisse à niveau constant (château de pâte) qui alimente le répartiteur de la machine à papier par l'intermédiaire d'une vanne de régulation (la vanne de grammage). La suspension (d'une concentration de 2,6 à 2,8 %) y est mélangée à des eaux blanches de la fosse sous toile et la concentration est abaissée jusqu'au degré voulu en caisse d'arrivée (d'ordinaire de 0,5 à 1,0 % de concentration).

Spanish

Save record 15

Record 16 1993-07-15

English

Subject field(s)
  • Pulp Preparation (papermaking)
OBS

High-Consistency System. Figure 11-18 shows a representative system where pulp is handled in the 25% to 28% consistency range. Typically, a press is used to raise the feed consistency to about 30%. Fresh caustic or oxidized white liquor along with the magnesium protector is added to the pulp at the discharge of the press. A thick stock pump then transfers the pulp to a fluffer via a feed pipe in which a gas-tight plug is formed. The fluffed pulp flows down the pressurized reactor as a loose bed, while gaseous oxygen is continuously dissolved into the liquid phase and reacted with the pulp.... Oxygen gas is added to either top or bottom to maintain a partial pressure within the 90 to 130 psi range. Relief is taken from the head space at the top of the tower to remove combustibles and other noncondensible gases, and control overall reactor pressure. At the bottom of the tower, the reacted pulp is diluted with post-oxygen filtrate and pumped at about 6% consistency to a blow tank.

French

Domaine(s)
  • Préparation de la pâte à papier

Spanish

Save record 16

Record 17 1986-10-01

English

Subject field(s)
  • Rolling Stock (Railroads)
OBS

Part of the tank car (wagon-citerne); see illustrations in CPAC-3.

French

Domaine(s)
  • Matériel roulant (Chemins de fer)

Spanish

Save record 17

Record 18 1986-10-01

English

Subject field(s)
  • Rolling Stock (Railroads)
OBS

Part of the tank car (wagon-citerne); see illustrations in CPAC-3.

French

Domaine(s)
  • Matériel roulant (Chemins de fer)

Spanish

Save record 18

Record 19 1986-07-02

English

Subject field(s)
  • Hydraulic Hoisting and Lifting
  • Forestry Operations
CONT

Return oil from the base end of the clamp cylinders from back to tank via the other plunger operating the wrist cylinder(Koehring Canada Ltd, Saw/Shear and Shear Wrist-Action Multiple Tree Felling Head, 1980, p. 1. 6).

OBS

En anglais, tilt cylinder est utilisé indifféremment pour désigner soit le vérin d’inclinaison frontale ou le vérin d’inclinaison latérale; c’est le contexte qui permet de faire la distinction.

French

Domaine(s)
  • Levage hydraulique
  • Exploitation forestière
DEF

Vérin qui incline la tête d'abattage vers la gauche ou la droite pour la positionner parallèlement à l'arbre à abattre.

OBS

On rencontre sur le marché plusieurs mécanismes d'inclinaison latérale portant des noms différents, mais à quelques variantes près, ils jouent tous le même rôle.

Spanish

Save record 19

Record 20 1986-06-25

English

Subject field(s)
  • Geophysics
CONT

Water carry-over into the mains could be due to too small a waste discharge orifice coupled with a sticking ball check valve, or by the failure of the high level spill device in the head tank of a hot water transmission system.

French

Domaine(s)
  • Géophysique

Spanish

Save record 20

Record 21 1986-05-06

English

Subject field(s)
  • Civil Engineering
  • Water Treatment (Water Supply)
DEF

A surge tank with the opening between the conduit and the tank constricted in order to create an increased head differential when the water is flowing to or from the tank.

French

Domaine(s)
  • Génie civil
  • Traitement des eaux
DEF

Cheminée d'équilibre dans laquelle l'entrée est rétrécie dans le but d'augmenter les pertes de charge et de hâter ainsi l'amortissement des oscillations.

Spanish

Save record 21

Record 22 1986-05-06

English

Subject field(s)
  • Civil Engineering
  • Water Treatment (Water Supply)
DEF

A surge tank without a restricted orifice to create a head differential between the conduit and the tank.

French

Domaine(s)
  • Génie civil
  • Traitement des eaux
DEF

Cheminée d'équilibre constituée seulement par un puits cylindrique et vertical relié à la conduite forcée et placé le plus près possible des robinets de garde de la turbine pour réduire la longueur de la conduite forcée et la protéger contre les coups de bélier.

Spanish

Save record 22

Record 23 1985-10-03

English

Subject field(s)
  • Equipment and Tools (Water Supply)
DEF

a manifold or supply pipe to which a number of branch pipes are connected.

CONT

The header in the bottom of the tank must be of very large section in order to reduce the head loss, and the orifices in all the branch pipes are designed in such a way that the water is absolutely uniformly distributed over the entire bottom of the clarifier during the emptying of the vacuum chamber.

French

Domaine(s)
  • Équipement et outillage (Alimentation en eau)
CONT

Le collecteur général, situé à la partie inférieure du décanteur, possède une très grande section afin de réduire sa perte de charge. Les orifices disposés sur ses ramifications sont calculés de telle sorte que la répartition de l'eau soit absolument uniforme sur tout le fond du décanteur pendant chaque vidange de la cloche.

Spanish

Save record 23

Record 24 1985-09-09

English

Subject field(s)
  • Security Devices
  • Rolling Stock (Railroads)

French

Domaine(s)
  • Dispositifs de sécurité
  • Matériel roulant (Chemins de fer)
OBS

Défini dans : Règlement sur les spécifications 112 et 114 de la C.C.T. wagons-citernes p. 470.

Spanish

Save record 24

Record 25 1982-08-31

English

Subject field(s)
  • Storehouses and Warehouses
  • Equipment and Tools (Water Supply)
  • Wastewater Treatment
CONT

The liquid extracted from the dried heated sludge can be disposed of in various ways : spreading as manure, return to the head of the plant with or without buffer storage tank enabling the liquor to be reinjected at the start of biological purification during the hours when pollution is least.

Key term(s)
  • buffer tank

French

Domaine(s)
  • Magasins de stockage
  • Équipement et outillage (Alimentation en eau)
  • Traitement des eaux usées
CONT

La phase liquide extraite des boues cuites déshydratées peut avoir les destinations suivantes : épandage en culture, retour en tête de station sans ou avec bac tampon de stockage permettant de réinjecter la liqueur en tête de l'épuration biologique durant les heures de moindre pollution.

Key term(s)
  • bac tampon

Spanish

Save record 25

Record 26 1982-03-22

English

Subject field(s)
  • Equipment and Tools (Water Supply)
  • Wastewater Treatment
CONT

Improvements on [the separate tank process] include : stepped aeration, with more oxygen entering upstream than down-stream, stepped feed; the water to be treated is fed in at a number of points along the aeration channel in different ways according to circumstances, while all the recirculated sludge is returned to the head of the tank.

French

Domaine(s)
  • Équipement et outillage (Alimentation en eau)
  • Traitement des eaux usées
CONT

Les progrès apportés [aux systèmes à bassins séparés] sont : l'aération étagée, plus forte à l'amont qu'à l'aval, l'alimentation étagée : l'eau à traiter est répartie le long du canal d'aération de différentes façons selon les circonstances, alors que toute la boue recyclée est renvoyée en tête.

Spanish

Save record 26

Record 27 1981-05-08

English

Subject field(s)
  • Winemaking
OBS

Tool consisting of a flat head of wood or metal on a long handle used for mixing the contents of a vat or tank.

French

Domaine(s)
  • Industrie vinicole
OBS

Instrument composé d'une surface en bois ou en métal fixée à un manche, que l'on déplace dans une cuve pleine pour en mélanger les différentes couches, ou qui sert à fouetter les vins après un collage.

Spanish

Save record 27

Record 28 1980-03-05

English

Subject field(s)
  • Nuclear Power Stations
CONT

Cover gas system. Helium purges the calandria head tank and four calandria pressure relief pipes of deuterium which accumulates in the gas space as a result of radiolysis of D20.

OBS

Applies to CANDU nuclear reactors.

French

Domaine(s)
  • Centrales nucléaires
CONT

Système du gaz de couverture. L'hélium chasse le deutérium produit par la radiolyse du D20 et qui s'accumule dans la partie supérieure de la cuve (...)

Spanish

Save record 28

Record 29 1975-03-11

English

Subject field(s)
  • Plumbing

French

Domaine(s)
  • Plomberie
CONT

Ces bâtiments [hauts] sont divisés en tranches horizontales alimentées par des réservoirs de charge placés dans les étapes et dans lesquels l'eau est refoulée par une pompe installée dans les sous-sols

Spanish

Save record 29

Copyright notice for the TERMIUM Plus® data bank

© Public Services and Procurement Canada, 2026
TERMIUM Plus®, the Government of Canada's terminology and linguistic data bank
A product of the Translation Bureau

Features

GCtranslate (available on the Government of Canada network only)

Use this artificial intelligence prototype to translate Government of Canada content up to and including Protected B. Available to employees of selected departments and agencies only.

Writing tools

The Language Portal’s writing tools have a new look! Easy to consult, they give you access to a wealth of information that will help you write better in English and French.

Glossaries and vocabularies

Access Translation Bureau glossaries and vocabularies.

Date Modified: