TERMIUM Plus®

From: Translation Bureau

On social media

Consult the Government of Canada’s terminology data bank.

HEIGHT CONE [6 records]

Record 1 2010-11-23

English

Subject field(s)
  • Strength of Materials
  • Engineering Tests and Reliability
  • Destructive and Non-destructive Tests (Mat.)
DEF

A test for the consistency of concrete, made with a metal mould in the form of a frustum of a cone with the following internal dimensions; bottom diameter 200 mm(8 in), top diameter 100 mm(4 in), height 300 mm(12 in).

OBS

slump test: term proposed by the World Road Association.

French

Domaine(s)
  • Résistance des matériaux
  • Fiabilité, contrôle et essais (Ingénierie)
  • Contrôle destructif et non destructif (Matér.)
DEF

Détermination de l'ouvrabilité d'un béton, par mesure de l'affaissement d'un volume déterminé de ce béton sous l'influence de son poids.

OBS

Le résultat, obtenu au cône d'Abrams, s'exprime en centimètres.

OBS

essai d'affaissement au cône : terme proposé par l'Association mondiale de la Route.

Spanish

Save record 1

Record 2 2004-02-20

English

Subject field(s)
  • Airborne Forces
  • Skydiving, Paragliding and Hang Gliding
DEF

... an imaginary line extending upwind from the desired point of impact to the parachute opening point.

CONT

[If] you are to the left or right of your opening point, you are positioned "off the wind line".

OBS

It is the centre line of an area known as the wind cone, within which a parachutist must remain if he is to land on the desired point of impact. The radius of the wind cone varies with the forward speed of the canopy and the height AGL. The wind cone radius for the CT-2 canopy at 305 m is approximately 100 to 175 metres. It should be noted that the wind cone will not necessarily be a straight line, as it is affected by the changes in wind speed and direction at the various altitudes through which it passes.

French

Domaine(s)
  • Forces aéroportées
  • Parachutisme, parapente et deltaplane
DEF

[...] ligne imaginaire qui part, contre le vent, du point d'impact prévu au point d'ouverture du parachute.

OBS

C'est la ligne médiane d'une zone appelée cône de direction du vent, à l'intérieur duquel le parachutiste doit rester s'il veut atterrir au point d'impact prévu. Le rayon du cône varie avec la vitesse avant de la voilure et l'altitude au-dessus du niveau du sol. Le rayon du cône de direction du vent pour la voilure CT-2 à 305 m (100 pieds) d'altitude est d'environ 100 à 175 mètres. Il y a lieu de noter que le cône n'est pas nécessairement une ligne droite; il varie suivant les changements dans la vitesse et la direction du vent, aux diverses altitudes par lesquelles il passe.

Spanish

Save record 2

Record 3 1990-09-28

English

Subject field(s)
  • Engineering Tests and Reliability
  • Strength of Materials
CONT

Cone penetration impact test... test in which a cone is dropped from a specified height into a horizontally held fabric specimen contained in a 6-inch-diameter California bearing ratio(CBR) mold. The size of the resulting hole is measured and qualitatively rated from one fabric to another. The test attempts to simulate the dropping of stone subbase directly on fabric. Though not an ideal test, it typifies attempts being made to assess impact resistance of construction fabrics.

CONT

Cone Penetration Test (or Cone Drop Test). In this test ... a fabric is deformed by a falling cone ... . The specimen is clamped into a CBR cylinder in the same way as in the CBR test.

French

Domaine(s)
  • Fiabilité, contrôle et essais (Ingénierie)
  • Résistance des matériaux
CONT

La méthode la plus simple pour réceptionner un géotextile est la détermination de la masse surfacique qui nécessite du matériel rudimentaire (...) La résistance en traction/poinçonnement telle que la norme allemande DIN 54307 le prescrit est certainement la meilleure solution, mais elle nécessite à proximité du chantier un laboratoire disposant d'une presse et d'un moule CBR.

Spanish

Save record 3

Record 4 1990-09-28

English

Subject field(s)
  • Engineering Tests and Reliability
  • Strength of Materials
DEF

... test in which a cone is dropped from a specified height into a horizontally held fabric specimen contained in a 6-inch-diameter California bearing ratio(CBR) mold. The size of the resulting hole is measured and qualitatively rated from one fabric to another. The test attempts to simulate the dropping of stone subbase directly on fabric. Though not an ideal test, it typifies attempts being made to assess impact resistance of construction fabrics.

French

Domaine(s)
  • Fiabilité, contrôle et essais (Ingénierie)
  • Résistance des matériaux
OBS

Essai pénétrométrique : essai de pénétration s'effectuant par sondage, en vue de mesurer les caractéristiques mécaniques et de constitution du sol.

OBS

Méthode du pénétromètre à cône. Cette méthode comporte un tube dans lequel peut glisser une tige-piston, terminée par une pointe conique. On peut faire agir une pression sur le tube seul, ou sur l'ensemble tuge-tige. La pénétration de la pointe permet de mesurer la résistance du sol en kg/cm [carrés] [...]

OBS

Les essais mentionnés en OBS ci-dessus sont définis en contexte d'analyse des sols mais sont également utilisés dans d'autres contextes comme celui de la résistance des matériaux géotextiles.

Spanish

Save record 4

Record 5 1990-02-21

English

Subject field(s)
  • Textile Weaving (Textile Industries)
  • Tools and Equipment (Textile Industries)
DEF

Angle determined by the height and length of the cone.

OBS

Mathematically, the "cone angle" is the half-angle of the cone.

French

Domaine(s)
  • Tissage (Industries du textile)
  • Outillage et équipement (Industries du textile)
DEF

Angle déterminé par la hauteur et la longueur du cône.

OBS

Mathématiquement, l'"angle du cône" est le demi-angle du cône.

Spanish

Save record 5

Record 6 1981-01-06

English

Subject field(s)
  • Textile Weaving (Textile Industries)
  • Tools and Equipment (Textile Industries)
OBS

Useful height from the drum surface to the greatest height of the yarn wound, measured at right-angles to the surface of the warping drum or reel.

French

Domaine(s)
  • Tissage (Industries du textile)
  • Outillage et équipement (Industries du textile)
OBS

Distance radiale disponible de la surface cylindrique du tambour jusqu'au plus grand diamètre de fil enroulé, et mesurée à angle droit avec la surface cylindrique du tambour.

Spanish

Save record 6

Copyright notice for the TERMIUM Plus® data bank

© Public Services and Procurement Canada, 2026
TERMIUM Plus®, the Government of Canada's terminology and linguistic data bank
A product of the Translation Bureau

Features

GCtranslate (available on the Government of Canada network only)

Use this artificial intelligence prototype to translate Government of Canada content up to and including Protected B. Available to employees of selected departments and agencies only.

Writing tools

The Language Portal’s writing tools have a new look! Easy to consult, they give you access to a wealth of information that will help you write better in English and French.

Glossaries and vocabularies

Access Translation Bureau glossaries and vocabularies.

Date Modified: