TERMIUM Plus®

From: Translation Bureau

On social media

Consult the Government of Canada’s terminology data bank.

INJECTION STROKE [5 records]

Filter results by subject field Alphabetical list of terms

Filter results by subject field

Alphabetical list of terms

Record 1 2015-08-26

English

Subject field(s)
  • Nervous System
CONT

Serious neurologic events, some resulting in death, have been reported with epidural injection of corticosteroids. Specific events reported include, but are not limited to, spinal cord infarction, paraplegia, quadriplegia, cortical blindness, and stroke.

French

Domaine(s)
  • Système nerveux
CONT

De graves manifestations neurologiques, dont certaines ont entraîné la mort, ont été signalées avec l'injection épidurale de corticostéroïdes. Plus précisément, ces manifestations comprennent, mais sans s'y limiter, un infarctus médullaire spinal, une paraplégie, une quadraplégie, une cécité corticale et un AVC [accident vasculaire cérébral].

Spanish

Save record 1

Record 2 2014-05-23

English

Subject field(s)
  • Plastics Manufacturing
DEF

The travel of the ram of a press.

CONT

The injection stroke is the maximum distance that the injection plunger can travel.

OBS

stroke: term and definition standardized by ISO.

French

Domaine(s)
  • Plasturgie
DEF

Chemin que parcourt le piston d'une presse.

OBS

course : terme et définition normalisés par l'ISO.

Spanish

Campo(s) temático(s)
  • Fabricación de plásticos
DEF

Trayecto que recorre el pistón de una prensa.

Save record 2

Record 3 2000-07-24

English

Subject field(s)
  • Engines (Motor Vehicles)
  • Fueling Systems (Motor Vehicles)
  • Diesel Motors
DEF

Distance between the top surface of a fuel injection pump plunger(or plunger assembly) at the end of the plunger stroke and the nearest component that would limit its further movement.

French

Domaine(s)
  • Moteur (Véhicules automobiles)
  • Alimentation (Véhicules automobiles)
  • Moteurs diesel
DEF

Distance entre la face d'extrémité supérieure d'un piston d'une pompe d'injection (ou d'un mécanisme de pompage), à la fin de la course de piston, et le composant le plus proche qui pourrait limiter le prolongement de son mouvement.

Spanish

Save record 3

Record 4 1997-11-17

English

Subject field(s)
  • Plastics Manufacturing
CONT

Another process somewhat related to extrusion blow molding is the extrusion/molded neck process. Still used today by Owens-Illinois, this is a proprietary process that traces its roots to glass-blowing technology. It is unique in that the bottle neck finish is injection molded and the bottle body is extrusion blow-molded. In this process, the two halves of a neck finish cavity or neckring are mounted to an actuating head assembly, which intermeshes with the two halves of the blow-mold cavity. The process cycle begins with the main body mold cavity open and the neckring cavity closed. The actuating head assembly moves downward to contact the extrusion die head. When it is in position, extrusion pressure fills the neck section with plastic melt. After it is held for one to two seconds, the head assembly moves upward while, simultaneously, the parison is extruded. When the head assembly reaches the top of its stroke, the blow-mold cavity closes on the parison. The remaining steps of parison pinch-off, blowing, and part removal all follow conventional techniques. Although the production cycle is somewhat slow, the process offers the quality advantage of an accurately molded neck and the process advantage of a parison held at both ends.

Key term(s)
  • extrusion moulded neck blow-moulding process
  • extrusion moulded neck blow moulding process
  • extrusion molded neck blow molding process
  • forced extrusion blow moulding
  • extrusion/moulded neck process
  • extrusion molded neck process
  • extrusion moulded neck process

French

Domaine(s)
  • Plasturgie

Spanish

Save record 4

Record 5 1986-07-11

English

Subject field(s)
  • Diesel Motors
CONT

For the lower helix type plunger, the effective stroke injection always begins at the same time.... Plungers of this type are used in injection pumps marked timed for Port Closing.

French

Domaine(s)
  • Moteurs diesel
CONT

Les pistons à une seule rainure verticale avec une rampe vers le bas inclinée à gauche ou à droite; ce sont des pistons à début d'injection constant et fin variable.

Spanish

Save record 5

Copyright notice for the TERMIUM Plus® data bank

© Public Services and Procurement Canada, 2026
TERMIUM Plus®, the Government of Canada's terminology and linguistic data bank
A product of the Translation Bureau

Display options

Change the order of display of the official languages of Canada
Option to display the non-official languages (Spanish or Portuguese)
Display definitions, contexts, etc., on records

Features

GCtranslate (available on the Government of Canada network only)

Use this artificial intelligence prototype to translate Government of Canada content up to and including Protected B. Available to employees of selected departments and agencies only.

Writing tools

The Language Portal’s writing tools have a new look! Easy to consult, they give you access to a wealth of information that will help you write better in English and French.

Glossaries and vocabularies

Access Translation Bureau glossaries and vocabularies.

Date Modified: