TERMIUM Plus^®

Record 1,  Textual support,  English

Record number: 1, Textual support number: 1 DEF

Any of a family of condensation polymers of ethylene glycol with a high molecular weight that can be liquid or waxlike in consistency, are soluble in water and in many organic solvents and are used in detergents, in metal and rubber processing as well as additives to foods and animal feed, bases for cosmetics and pharmaceuticals, binders, emulsifiers, humectants, laboratory reagents, mold lubricants, ointments, plasticizers, polishes, softeners and solvents.  8, record 1, English, - alpha%2Dhydro%2Domega%2Dhydroxypoly%28oxyethane%2D1%2C2%2Ddiyl%29

Record number: 1, Textual support number: 1 CONT

Polyethylene glycol(PEG) and polyethylene oxide are polymers of ethylene oxide. Polyethylene glycol refers to the polymer with molecular weight less than 50, 000, while polyethylene oxide is used for higher molecular weights. Polyethylene glycol is a polyether.  9, record 1, English, - alpha%2Dhydro%2Domega%2Dhydroxypoly%28oxyethane%2D1%2C2%2Ddiyl%29

Record number: 1, Textual support number: 1 OBS

alpha-; omega: These words must be replaced by the corresponding Greek letters or italicized.  1, record 1, English, - alpha%2Dhydro%2Domega%2Dhydroxypoly%28oxyethane%2D1%2C2%2Ddiyl%29

Record number: 1, Textual support number: 2 OBS

alpha-hydro-omega-hydroxypoly(oxyethane-1,2-diyl): form recommended by the IUPAC (International Union of Pure and Applied Chemistry) for the systematic name corresponding to the CAS number indicated on the present record.  1, record 1, English, - alpha%2Dhydro%2Domega%2Dhydroxypoly%28oxyethane%2D1%2C2%2Ddiyl%29

Record number: 1, Textual support number: 3 OBS

poly(ethylene glycol): form recommended by the IUPAC (International Union of Pure and Applied Chemistry) for polymer name.  1, record 1, English, - alpha%2Dhydro%2Domega%2Dhydroxypoly%28oxyethane%2D1%2C2%2Ddiyl%29

Record number: 1, Textual support number: 4 OBS

Not to be confused with "polyglycol."  8, record 1, English, - alpha%2Dhydro%2Domega%2Dhydroxypoly%28oxyethane%2D1%2C2%2Ddiyl%29

Record number: 1, Textual support number: 5 OBS

Chemical formula: H-(OCH₂CH₂)_n-OH  8, record 1, English, - alpha%2Dhydro%2Domega%2Dhydroxypoly%28oxyethane%2D1%2C2%2Ddiyl%29

Record number: 1, Textual support number: 6 OBS

In the chemical formula the subscripted "n" must be italicized.  8, record 1, English, - alpha%2Dhydro%2Domega%2Dhydroxypoly%28oxyethane%2D1%2C2%2Ddiyl%29

Record 1,  Textual support,  French

Record number: 1, Textual support number: 1 DEF

Nom générique de hauts-polymères utilisés comme agents hygroscopiques pour les produits pharmaceutiques, comme solvants, dans la fabrication d'agents tensioactifs, de lubrifiants, de plastifiants et de produits cosmétiques.  8, record 1, French, - alpha%2Dhydro%2Dom%C3%A9ga%2Dhydroxypoly%28oxy%C3%A9thane%2D1%2C2%2Ddiyl%29

Record number: 1, Textual support number: 1 OBS

alpha-; oméga : Ces mots doivent être remplacés par la lettre grecque correspondante ou s'écrire en italique.  1, record 1, French, - alpha%2Dhydro%2Dom%C3%A9ga%2Dhydroxypoly%28oxy%C3%A9thane%2D1%2C2%2Ddiyl%29

Record number: 1, Textual support number: 2 OBS

alpha-hydro-oméga-hydroxypoly(oxyéthane-1,2-diyl) : forme recommandée par l'UICPA (Union internationale de chimie pure et appliquée) pour le nom systématique correspondant au numéro CAS indiqué sur la présente fiche.  1, record 1, French, - alpha%2Dhydro%2Dom%C3%A9ga%2Dhydroxypoly%28oxy%C3%A9thane%2D1%2C2%2Ddiyl%29

Record number: 1, Textual support number: 3 OBS

poly(éthylèneglycol) : forme recommandée par l'UICPA (Union internationale de chimie pure et appliquée) comme nom de polymère.  1, record 1, French, - alpha%2Dhydro%2Dom%C3%A9ga%2Dhydroxypoly%28oxy%C3%A9thane%2D1%2C2%2Ddiyl%29

Record number: 1, Textual support number: 4 OBS

Formule chimique : H-(OCH₂CH₂)_n-OH  7, record 1, French, - alpha%2Dhydro%2Dom%C3%A9ga%2Dhydroxypoly%28oxy%C3%A9thane%2D1%2C2%2Ddiyl%29

Record number: 1, Textual support number: 5 OBS

Dans la formule chimique, la lettre «n» en indice s'écrit en italique.  7, record 1, French, - alpha%2Dhydro%2Dom%C3%A9ga%2Dhydroxypoly%28oxy%C3%A9thane%2D1%2C2%2Ddiyl%29

Record 1,  Textual support,  Spanish

Record number: 1, Textual support number: 1 OBS

macrogol: Término recomendado en el Diccionario crítico de dudas inglés-español de medicina, de Fernando A. Navarro.  5, record 1, Spanish, - macrogol

Record number: 1, Textual support number: 2 OBS

Fórmula química: H-(OCH₂CH₂)_n-OH  6, record 1, Spanish, - macrogol

Record number: 1, Textual support number: 3 OBS

En la fórmula química, la "n" que figura en subíndice debe escribirse en itálica.  5, record 1, Spanish, - macrogol

Record 2,  Textual support,  English

Record number: 2, Textual support number: 1 CONT

Polyol B--a 4, 000 molecular weight polyether diol containing 40% ethylene oxide residue and 60% propylene oxide residue... prepared by sequentially condensing propylene glycol first with ethylene oxide(initial block) and then with propylene oxide.  3, record 2, English, - ethylene%20oxide%20residue

Record 2,  Textual support,  French

Record number: 2, Textual support number: 1 CONT

Cathéters courts d'hémodialyse. Cathéter (PP) monté sur aiguille trocart. Ailettes rigides. Radiostérilisés (sans résidu d'oxyde d'éthylène).  1, record 2, French, - r%C3%A9sidu%20d%27oxyde%20d%27%C3%A9thyl%C3%A8ne

Record number: 2, Textual support number: 2 CONT

Plats de Pétri [sic : boîtes de Pétri]. [...] Avantages. [...] Élimination des résidus ETO qui donnent des résultats négatifs et qui présentent un risque pour la santé.  2, record 2, French, - r%C3%A9sidu%20d%27oxyde%20d%27%C3%A9thyl%C3%A8ne

Record 2,  Textual support,  Spanish

Record 3,  Textual support,  English

Record number: 3, Textual support number: 1 CONT

A urethane is formed from the reaction of an isocyanate with an alcohol. In general, polyurethanes are made using a diisocyanate, a low molecular weight diol(thermoplastic) and/or triol(cross-linked), and a polyether glycol or a polyester glycol. If the reagents are difunctional, a non cross-linked thermoplastic polyurethane will be formed; if the functionality of at least one of the reagents is greater than two, a cross-linked or three dimensional network will form. Cross-linked polyurethanes exhibit less mechanical creep than non cross-linked polyurethanes. The rubbery modulus of polyurethanes increases as the level of cross-linking is increased. Polyurethanes are diblock copolymers. They consist of hard segments(isocyanate and the chain extender rich areas) that act as physical crosslinks, and soft segments(polyether or polyester glycol rich areas).  3, record 3, English, - three%20dimensional%20network

Record 3,  Textual support,  French

Record number: 3, Textual support number: 1 CONT

Les adhésifs époxydes sont constitués de : [...] un (ou des) durcisseur(s) ou agent(s) de réticulation qui, par réaction chimique avec les groupements époxydes, permettent la formation du réseau tridimensionnel réticulé.  2, record 3, French, - r%C3%A9seau%20tridimensionnel

Record number: 3, Textual support number: 2 CONT

La structure des TD (résines thermodurcissables) a la forme d'un réseau tridimensionnel qui se ponte (double liaison de polymérisation) pour durcir en forme de façon définitive, lors d'un échauffement. La transformation est donc irréversible.  3, record 3, French, - r%C3%A9seau%20tridimensionnel

Record 3,  Textual support,  Spanish

Record 4,  Textual support,  English

Record number: 4, Textual support number: 1 CONT

A urethane is formed from the reaction of an isocyanate with an alcohol. In general, polyurethanes are made using a diisocyanate, a low molecular weight diol(thermoplastic) and/or triol(cross-linked), and a polyether glycol or a polyester glycol. If the reagents are difunctional, a non cross-linked thermoplastic polyurethane will be formed; if the functionality of at least one of the reagents is greater than two, a cross-linked or three dimensional network will form. Cross-linked polyurethanes exhibit less mechanical creep than non cross-linked polyurethanes. The rubbery modulus of polyurethanes increases as the level of cross-linking is increased. Polyurethanes are diblock copolymers. They consist of hard segments(isocyanate and the chain extender rich areas) that act as physical crosslinks, and soft segments(polyether or polyester glycol rich areas).  2, record 4, English, - polyester%20glycol

Record 4,  Textual support,  French

Record 4,  Textual support,  Spanish

Record 5,  Textual support,  English

Record number: 5, Textual support number: 1 CONT

A urethane is formed from the reaction of an isocyanate with an alcohol. In general, polyurethanes are made using a diisocyanate, a low molecular weight diol(thermoplastic) and/or triol(cross-linked), and a polyether glycol or a polyester glycol. If the reagents are difunctional, a non cross-linked thermoplastic polyurethane will be formed; if the functionality of at least one of the reagents is greater than two, a cross-linked or three dimensional network will form. Cross-linked polyurethanes exhibit less mechanical creep than non cross-linked polyurethanes. The rubbery modulus of polyurethanes increases as the level of cross-linking is increased. Polyurethanes are diblock copolymers. They consist of hard segments(isocyanate and the chain extender rich areas) that act as physical crosslinks, and soft segments(polyether or polyester glycol rich areas).  3, record 5, English, - cross%2Dlinked%20network

Record 5,  Textual support,  French

Record number: 5, Textual support number: 1 CONT

Les adhésifs époxydes sont constitués de : [...] un (ou des) durcisseur(s) ou agent(s) de réticulation qui, par réaction chimique avec les groupements époxydes, permettent la formation du réseau tridimensionnel réticulé.  3, record 5, French, - r%C3%A9seau%20pont%C3%A9

Record number: 5, Textual support number: 1 OBS

La structure des TD (résines thermodurcissables) a la forme d'un réseau tridimensionnel qui se ponte (double liaison de polymérisation) pour durcir en forme de façon définitive, lors d'un échauffement. La transformation est donc irréversible.  4, record 5, French, - r%C3%A9seau%20pont%C3%A9

Record 5,  Textual support,  Spanish

Record 6,  Textual support,  English

Record number: 6, Textual support number: 1 CONT

A urethane is formed from the reaction of an isocyanate with an alcohol. In general, polyurethanes are made using a diisocyanate, a low molecular weight diol(thermoplastic) and/or triol(cross-linked), and a polyether glycol or a polyester glycol. If the reagents are difunctional, a non cross-linked thermoplastic polyurethane will be formed; if the functionality of at least one of the reagents is greater than two, a cross-linked or three dimensional network will form. Cross-linked polyurethanes exhibit less mechanical creep than non cross-linked polyurethanes. The rubbery modulus of polyurethanes increases as the level of cross-linking is increased. Polyurethanes are diblock copolymers. They consist of hard segments(isocyanate and the chain extender rich areas) that act as physical crosslinks, and soft segments(polyether or polyester glycol rich areas).  2, record 6, English, - difunctional%20reagent

Record 6,  Textual support,  French

Record number: 6, Textual support number: 1 CONT

nous [...] sommes restés dans l'idée d'utiliser un diluant réactif difonctionnel qui jouera le rôle de plastifiant interne. Ce diluant, par sa présence, diminuera la viscosité du mélange fondu et augmentera son temps de gel.  2, record 6, French, - r%C3%A9actif%20difonctionnel

Record 6,  Textual support,  Spanish

Record 7,  Textual support,  English

Record number: 7, Textual support number: 1 CONT

A urethane is formed from the reaction of an isocyanate with an alcohol. In general, polyurethanes are made using a diisocyanate, a low molecular weight diol(thermoplastic) and/or triol(cross-linked), and a polyether glycol or a polyester glycol. If the reagents are difunctional, a non cross-linked thermoplastic polyurethane will be formed; if the functionality of at least one of the reagents is greater than two, a cross-linked or three dimensional network will form. Cross-linked polyurethanes exhibit less mechanical creep than non cross-linked polyurethanes. The rubbery modulus of polyurethanes increases as the level of cross-linking is increased. Polyurethanes are diblock copolymers. They consist of hard segments(isocyanate and the chain extender rich areas) that act as physical crosslinks, and soft segments(polyether or polyester glycol rich areas).  2, record 7, English, - rubbery%20modulus

Record number: 7, Textual support number: 2 CONT

It has been reported that the glassy and rubbery modulus of a curing resin is relatively insensitive to the degree of cure of the material.  3, record 7, English, - rubbery%20modulus

Record 7,  Textual support,  French

Record 7,  Textual support,  Spanish