TERMIUM Plus®

The Government of Canada’s terminology and linguistic data bank.

POUTRE S1 [7 records]

Filter results by subject field Alphabetical list of terms

Filter results by subject field

Alphabetical list of terms

Record 1 2004-06-08

English

Subject field(s)
  • Orbital Stations
CONT

... first starboard truss segment, was attached to the starboard side of the S0 Truss. ... The S1 Truss provides structural support for the Active Thermal Control System, Mobile Transporter and one Crew and Equipment Translation Aid cart. ... The S1 Truss also has mounts for cameras and lights, as well as antenna support equipment for S-band communications equipment.

OBS

The assembly sequence of the trusses on the International Space Station does not usually correspond to the number assigned to each segment of the struss structure. Trusses are numbered as follows: P1, P3, P4, P5, P6 (port side) and S1, S3, S4, S5, S6 (starboard side). In this case however, the S1 structure is referred to as the first starboard truss segment.

OBS

first starboard truss segment: term officially approved by the International Space Station official approval Group (ISSOAG).

French

Domaine(s)
  • Stations orbitales
CONT

[...] la l5e mission (9A) vers la Station spatiale internationale avec le premier segment tribord de la poutrelle (ITS-S1) et des radiateurs.

OBS

La séquence d’assemblage des poutres bâbord(P1, P3, P4, P5, P6) et tribord(S1, S3, S4, S5, S6) de la Station spatiale internationale diffère habituellement de l'ordre de numérotation des éléments structuraux de la grande poutrelle. Dans le cas présent toutefois, la poutre S1 correspond au premier segment tribord de la poutrelle.

OBS

premier segment tribord de la poutrelle : terme uniformisé par le Groupe de travail de la terminologie de la Station spatiale internationale (GTTSSI).

Spanish

Save record 1

Record 2 2003-05-29

English

Subject field(s)
  • Orbital Stations
CONT

Solar Arrays and Batteries (Photovoltaic Module S6). Fourth and final set of U.S. solar arrays delivered along with fourth starboard truss segment (S6).

OBS

The assembly sequence of the trusses on the International Space Station does not usually correspond to the number assigned to each segment of the struss structure. Trusses are numbered as follows: P1, P3, P4, P5, P6 (port side) and S1, S3, S4, S5, S6 (starboard side). In this case, the S6 structure is referred to as the fourth starboard truss segment.

OBS

fourth starboard truss segment: term officially approved by the International Space Station official approval Group (ISSOAG).

French

Domaine(s)
  • Stations orbitales
OBS

La séquence d’assemblage des poutres bâbord(P1, P3, P4, P5, P6) et tribord(S1, S3, S4, S5, S6) de la Station spatiale internationale diffère habituellement de l'ordre de numérotation des éléments structuraux de la grande poutrelle. Dans le cas présent, la poutre S6 correspond au quatrième segment tribord de la poutrelle.

OBS

quatrième segment tribord de la poutrelle : terme uniformisé par le Groupe de travail de la terminologie de la Station spatiale internationale (GTTSSI).

Spanish

Save record 2

Record 3 2003-05-23

English

Subject field(s)
  • Orbital Stations
CONT

The P1 Truss, the first port truss segment, was attached to the port side of the S0 truss. ... The P1 Truss provides structural support for the Active Thermal Control System, Mobile Transporter and one Crew and Equipment Translation Aid cart. ... The P1 Truss also has mounts for cameras and lights, and antenna support equipment for both UHF [Ultra High Frequency] and S-band communications equipment. The S-band equipment is currently on the P6 Truss.

OBS

The assembly sequence of the trusses on the International Space Station does not usually correspond to the number assigned to each segment of the struss structure. Trusses are numbered as follows: P1, P3, P4, P5, P6 (port side) and S1, S3, S4, S5, S6 (starboard side). In this case however, the P1 truss is referred to as the first port truss segment.

OBS

first port truss segment: term officially approved by the International Space Station official approval Group (ISSOAG).

French

Domaine(s)
  • Stations orbitales
CONT

[...] l’équipage de STS 113 installeront le troisième segment de l’immense poutrelle qui portera éventuellement les panneaux solaires (générant l’électricité) et les grands radiateurs (évacuateurs de chaleur). Il s’agit de la pièce dite P1, le première portion bâbord (gauche) de la poutrelle. Ce segment est identique au S1 (premier segment tribord, droit) installé en octobre. Au terme de cette opération d’assemblage, la poutrelle mesurera 40,5 mètres (elle fera, à terme, 108 mètres).

OBS

La séquence d’assemblage des poutres bâbord(P1, P3, P4, P5, P6) et tribord(S1, S3, S4, S5, S6) de la Station spatiale internationale diffère habituellement à l'ordre de numérotation des éléments structuraux de la grande poutrelle. Dans le cas présent toutefois, la poutre P1 correspond au premier segment bâbord de la poutrelle.

OBS

premier segment bâbord de la poutrelle : terme uniformisé par le Groupe de travail de la terminologie de la Station spatiale internationale (GTTSSI).

Spanish

Save record 3

Record 4 2003-05-23

English

Subject field(s)
  • Orbital Stations
CONT

The US space shuttle delivers the third port truss segment, the P5 Truss, to attach to second port truss segment, the P3/P4 Truss.

CONT

This truss segment, called "S5," is a mirror image of the P5 truss segment that arrived for processing at Kennedy Space Center in July 2001. The S5 truss segment is a 10-1/2-by-15-foot aluminum structure that will weigh 3,900 pounds when fully processed ... Items to be attached to the S5 truss include handholds to be used by spacewalking astronauts, a strut assembly, multi-layer thermal blankets, and the installation of the PVRGF.

CONT

The P5 and S5 segments are merely spacers that will provide enough room for the solar arrays to track the sun and not interfere with the other equipment, for example, the waste-heat radiators and antennas. The waste-heat radiators attached to segments S1 and P1 also must be clear of array movement.

OBS

The assembly sequence of the trusses on the International Space Station does not usually correspond to the number assigned to each segment of the struss structure. Trusses are numbered as follows: P1, P3, P4, P5, P6 (port side) and S1, S3, S4, S5, S6 (starboard side). In this case, the P5 truss is referred to as the third port truss segment.

OBS

third port truss segment: term officially approved by the International Space Station official approval Group (ISSOAG).

French

Domaine(s)
  • Stations orbitales
OBS

La séquence d’assemblage des poutres bâbord(P1, P3, P4, P5, P6) et tribord(S1, S3, S4, S5, S6) de la Station spatiale internationale diffère habituellement de l'ordre de numérotation des éléments structuraux de la grande poutrelle. Dans le cas présent, la poutre P5 correspond au troisième segment bâbord de la poutrelle.

OBS

troisième segment bâbord de la poutrelle : terme uniformisé par le Groupe de travail de la terminologie de la Station spatiale internationale (GTTSSI).

Spanish

Save record 4

Record 5 2003-05-23

English

Subject field(s)
  • Orbital Stations
CONT

Relocate P6 Truss from atop Z1 Truss to final assembly locationattached to P5 Truss (becomes final port-side truss segment).

OBS

The assembly sequence of the trusses on the International Space Station does not usually correspond to the number assigned to each segment of the struss structure. Trusses are numbered as follows: P1, P3, P4, P5, P6 (port side) and S1, S3, S4, S5, S6 (starboard side). In this case, the P6 truss is referred to as the final port-side truss segment.

OBS

final port-side truss segment: term officially approved by the International Space Station official approval Group (ISSOAG).

Key term(s)
  • final port truss segment

French

Domaine(s)
  • Stations orbitales
OBS

La séquence d’assemblage des poutres bâbord(P1, P3, P4, P5, P6) et tribord(S0, S1, S3, S4, S5, S6) de la Station spatiale internationale diffère habituellement de l'ordre de numérotation des segments structuraux de la grande poutrelle. Dans le cas présent, la poutre P6 correspond au dernier segment bâbord de la poutrelle.

OBS

dernier segment bâbord de la poutrelle : terme uniformisé par le Groupe de travail de la terminologie de la Station spatiale internationale (GTTSSI).

Spanish

Save record 5

Record 6 2003-05-21

English

Subject field(s)
  • Orbital Stations
CONT

The third starboard truss segment, the ITS S5 Truss, is attached to the S3/S4 Truss.

OBS

The assembly sequence of the trusses on the International Space Station does not usually correspond to the number assigned to each segment of the struss structure. Trusses are numbered as follows: P1, P3, P4, P5, P6 (port side) and S1, S3, S4, S5, S6 (starboard side). In this case, the S5 truss is referred to as the third starboard truss segment.

OBS

third starboard truss segment: term officially approved by the International Space Station official approval Group (ISSOAG).

French

Domaine(s)
  • Stations orbitales
OBS

La séquence d’assemblage des poutres bâbord(P1, P3, P4, P5, P6) et tribord(S1, S3, S4, S5, S6) de la Station spatiale internationale diffère habituellement à l'ordre de numérotation des éléments structuraux de la grande poutrelle. Dans le cas présent, la poutre S5 correspond au troisième segment tribord de la poutrelle.

OBS

troisième segment tribord de la poutrelle : terme uniformisé par le Groupe de travail de la terminologie de la Station spatiale internationale (GTTSSI).

Spanish

Save record 6

Record 7 2002-11-27

English

Subject field(s)
  • Orbital Stations
CONT

S1-Truss. Dimensions: 13.7 meters x 4.6 meters x 1.8 meters (45 feet x 15 feet x 6 feet)[;] Weight: 14,124 kilograms (31,137 pounds). The S1 Truss, the first starboard truss segment, was attached to the starboard side of the S0 Truss Oct. 10, 2002. The S1 Truss provides structural support for the Active Thermal Control System, Mobile Transporter and one Crew and Equipment Translation Aid cart. The cart is manually operated by a spacewalker and can also be used as a work platform. The cooling system is like the one in a car radiator except that it uses 99.9 percent pure ammonia, compared to 1 percent in household products. The Thermal Radiator Rotary Joint rotates the three radiator structures in a 105-degree span either way to keep the three radiators panels in the shade; it also transfers power and ammonia to the radiators. The S1 Truss also has mounts for cameras and lights, as well as antenna support equipment for S-band communications equipment.

OBS

S1 truss; integrated truss structure S1; S1; ITS-S1: terms and abbreviations officially approved by the International Space Station official approval Group (ISSOAG).

French

Domaine(s)
  • Stations orbitales
CONT

La nouvelle poutre comprend l'un des trois futurs radiateurs du système de refroidissement, composé lui-même de 18 panneaux. La poutre S1 est également dotée d’équipement de télécommunications, de caméras et d’un système d’éclairage.

OBS

poutre S1; segment de poutre intégrée S1; S1; ITS-S1 : termes et abréviations uniformisés par le Groupe de travail de la terminologie de la Station spatiale internationale(GTTSSI).

Spanish

Save record 7

Copyright notice for the TERMIUM Plus® data bank

© Public Services and Procurement Canada, 2025
TERMIUM Plus®, the Government of Canada's terminology and linguistic data bank
A product of the Translation Bureau

Display options

Change the order of display of the official languages of Canada
Option to display the non-official languages (Spanish or Portuguese)
Display definitions, contexts, etc., on records

Features

Language Portal of Canada

Access a collection of Canadian resources on all aspects of English and French, including quizzes.

Writing tools

The Language Portal’s writing tools have a new look! Easy to consult, they give you access to a wealth of information that will help you write better in English and French.

Glossaries and vocabularies

Access Translation Bureau glossaries and vocabularies.

Date Modified: