TERMIUM Plus^®

Record 1,  Textual support,  English

Record number: 1, Textual support number: 1 CONT

Terne coated sheet is any sheet steel that has been coated by immersion in a bath of molten terne metal. Terne metal is any alloy of lead and tin. ... Formerly, there were two classes of terne-coated products: long terne sheet (sometimes called simply long ternes) which was a hot-dipped sheet-mill product that fell within the dimensional ranges covered by the uncoated-sheet commodities; and short ternes (also called terne plate) which was a hot-dipped tin-mill product in black-plate gages (thickness less than 0.36 mm (0.014 inch). Short-ternes (terne plate) are no longer produced.  2, record 1, English, - long%20terne

Record number: 1, Textual support number: 2 CONT

Terne plate roofing sheets. All terne plate is produced by hot-dip process. Two product lines "short terne" and "long terne" are available. The difference between the two products is largely one of size. "Short terne" is generally available in the sizes 356 x 508 mm and 508 x 711 mm. "Long terne" is available in cut lengths up to 3,658 mm and coils, generally 15,240 mm in length.  3, record 1, English, - long%20terne

Record number: 1, Textual support number: 1 OBS

According to some authors, "short ternes" and "long ternes" differentiate themselves by the difference in the thickness of their tin coating. "Short" refers to the weight of coating per basis box, and always to the thinner coatings, usually 40.5 m² (436 sq. ft.) of plate or sheet; usually 3.6 kg of coating metal is the limit for short terne tin plates, and for heavier plates the weight of coating may vary from two to five times this amount. According to other authors, "short ternes" and "long ternes" differentiate themselves by the difference in their linear dimensions. Short ternes commonly measure 0.5 X 0.7 m, whereas long ternes have dimensions which usually fall within the limits of 0.6 X 1.5 m to 1.2 X 3.7 m. It is possible that the latter characteristic (size) conditions the former one (coating weight), ending in the same result, the difference being simply in the approach chosen.  4, record 1, English, - long%20terne

Record 1,  Textual support,  French

Record number: 1, Textual support number: 1 OBS

Fer terne dont la masse de revêtement ou les dimensions sont grandes.  1, record 1, French, - t%C3%B4le%20plomb%C3%A9e%20longue

Record 1,  Textual support,  Spanish

Record 2,  Textual support,  English

Record number: 2, Textual support number: 1 CONT

Terne coated sheet is any sheet steel that has been coated by immersion in a bath of molten terne metal. Terne metal is an alloy of lead and tin. ... Formerly, there were two classes of terne-coated products: long terne sheet (sometimes called simply long ternes) which was a hot-dipped sheet-mill product that fell within the dimensional ranges covered by the uncoated-sheet commodities; and short ternes (also called terne plate) which was a hot-dipped tin-mill product in black-plate gages (thickness less than 0.36 mm (0.014 inch). Short-ternes (terne plate) are no longer produced.  3, record 2, English, - short%20terne

Record number: 2, Textual support number: 2 CONT

Terne plate roofing sheets. All terne plate is produced by hot-dip process. Two product lines "short terne" and "long terne" are available. The difference between the two products is largely one of size. "Short terne" is generally available in the sizes 356 x 508 mm and 508 x 711 mm. "Long terne" is available in cut lengths up to 3,658 mm and coils, generally 15,240 mm in length.  4, record 2, English, - short%20terne

Record number: 2, Textual support number: 1 OBS

According to some authors, "short ternes" and "long ternes" differentiate themselves by the difference in the thickness of their tin coating. "Short" refers to the weight of coating per basis box, and always to the thinner coatings, usually 40.5 m² (436 sq. ft.) of plate or sheet; usually 3.6 kg of coating metal is the limit for short terne tin plates, and for heavier plates the weight of coating may vary from two to five times this amount. According to other authors, "short ternes" and "long ternes" differentiate themselves by the difference in their linear dimensions. Short ternes commonly measure 0.5 X 0.7 m, whereas long ternes have dimensions which usually fall within the limits of 0.6 X 1.5 m to 1.2 X 3.7 m. It is possible that the latter characteristic (size) conditions the former one (coating weight), ending in the same result, the difference being simply in the approach chosen.  2, record 2, English, - short%20terne

Record 2,  Textual support,  French

Record number: 2, Textual support number: 1 OBS

Fer terne dont la masse de revêtement ou les dimensions sont petites.  1, record 2, French, - t%C3%B4le%20plomb%C3%A9e%20courte

Record 2,  Textual support,  Spanish

Record 3,  Textual support,  English

Record number: 3, Textual support number: 1 OBS

Term(s) taken from a Canadian laboratory-equipment company's catalogue.  1, record 3, English, - terne%20plate

Record 3,  Textual support,  French

Record number: 3, Textual support number: 1 OBS

Terme(s) tiré(s) du catalogue d’une compagnie canadienne d’équipement de laboratoire.  1, record 3, French, - t%C3%B4le%20plomb%C3%A9e

Record 3,  Textual support,  Spanish

Record 4,  Textual support,  English

Record number: 4, Textual support number: 1 DEF

Sheet coated with a lead-tin alloy either by dipping in a bath of molten alloy or electrolytically. In general, the highest nominal mass specified for the coating corresponds to a minimum of 120 g/m² including both sides. [Definition standardized by ISO.]  1, record 4, English, - terne%2Dcoated%20sheet

Record number: 4, Textual support number: 1 OBS

Terne coated sheet is any sheet steel that has been coated by immersion in a bath of molten terne metal. Terne metal is an alloy of lead and tin. Sheet steel coated with terne metal is duller in appearance than sheet steel coated with tin alone, and it is this feature of the product that gave rise to the name "terne" - meaning "dull".  2, record 4, English, - terne%2Dcoated%20sheet

Record number: 4, Textual support number: 2 OBS

terne-coated sheet; terne-coated plate: terms standardized by ISO.  5, record 4, English, - terne%2Dcoated%20sheet

Record 4,  Textual support,  French

Record number: 4, Textual support number: 1 DEF

Tôle revêtue d’un alliage plomb-étain soit par immersion dans un bain d’alliage en fusion, soit par électrolyse. En général, la masse nominale maximale spécifiée pour le revêtement correspond à un minimum de 120 g/m², y compris les deux faces. [Définition normalisée par l’ISO.]  4, record 4, French, - fer%20terne

Record number: 4, Textual support number: 1 CONT

Les tôles plombées sont constituées d’un substrat en acier doux non allié (ou en acier inoxydable) laminé à froid, recouvert sur les deux faces d’une couche d’alliage riche en plomb, qui lui confère une bonne résistance à la corrosion. [...] Les tôles plombées présentent un aspect gris-mat. La désignation du produit par l’expression «terneplate» dans les pays anglo-saxons a pour origine le qualificatif français terne.  5, record 4, French, - fer%20terne

Record number: 4, Textual support number: 1 OBS

fer terne; tôle plombée : termes normalisés par l'ISO.  6, record 4, French, - fer%20terne

Record 4,  Textual support,  Spanish

Record 5,  Textual support,  French

Record 5,  Textual support,  Spanish

Record 6,  Textual support,  English

Record 6,  Textual support,  French

Record number: 6, Textual support number: 1 DEF

acier revêtu d’une couche adhésive de quelque autre matière. Les genres, les plus usuels sont l'acier galvanisé, la tôle plombée et le fer-blanc, mais l'acier d’asphalte, et le reste  1, record 6, French, - feuille%20enduite

Record 6,  Textual support,  Spanish