TERMIUM Plus®

From: Translation Bureau

On social media

Consult the Government of Canada’s terminology data bank.

ARC CARBONE [10 records]

Record 1 2000-05-03

English

Subject field(s)
  • Arc Welding
DEF

A carbon arc welding process variation which produces coalescence of metals by heating them with an electric arc between a carbon electrode and the work. [Definition standardized by the AWS.]

OBS

Shielding is obtained from the combustion of a solid material fed into the arc or from a blanket of flux on the work or both. Pressure may or may not be used and filler metal may or may not be used.

OBS

shielded carbon arc welding; CAW-S: term and abbreviation standardized by the American Welding Society (AWS).

French

Domaine(s)
  • Soudage à l'arc
OBS

Arc électrique avec électrodes de carbone. Bien que l'arc à électrodes de carbone ait été le premier étudié, nous n'avons parlé que d'électrodes métalliques, presque universellement utilisée. Cependant, les électrodes au charbon sont parfois encore employées en soudage. L'arc est très stable et le soudeur doit le maintenir plus long que l'arc métallique afin que les particules de carbones incandescentes ne souillent pas le cordon. Il est évident que l'arc au charbon ne peut être qu'une source de chaleur; le métal d'apport est fourni par une baguette, sauf dans le cas d'une tôle mince à bords relevés où ces bords suffisent à alimenter le cordon. On utilise le courant continu à polarité directe.

Key term(s)
  • soudage à l'arc avec électrode de carbone

Spanish

Save record 1

Record 2 2000-03-07

English

Subject field(s)
  • Welding and Soldering (Metals)
  • Arc Welding
DEF

A brazing process which produces coalescence of metals by heating them with an electric arc between two carbon electrodes. [Definition standardized by the AWS.]

OBS

The filler metal is distributed in the joint by capillary attraction.

OBS

twin carbon arc brazing; TCAB: term and abbreviation standardized by the American Welding Society (AWS).

OBS

twin carbon arc brazing; TCAB: term and abbreviation standardized by the CSA International. Material reproduced with the permission of the copyright holder, the Canadian Standards Association (CSA), 178 Rexdale Blvd., Toronto, Ontario, Canada M9W 1R3. However, CSA shall not be responsible for the manner in which the information is presented, nor for any interpretations thereof. This CSA material may not have been updated to reflect amendments subsequently made to the original content. For further information, contact CSA International.

French

Domaine(s)
  • Soudage (Métal)
  • Soudage à l'arc
DEF

Procédé de brasage fort dans lequel la chaleur nécessaire à la liaison provient d'un arc électrique jaillissant entre deux électrodes de carbone. [Définition normalisée par la CSA International.]

OBS

brasage fort à l'arc au carbone; procédé TCAB : termes normalisés par la CSA International. Reproduit avec l'autorisation de l'Association canadienne de normalisation (CSA), 178, boul. Rexdale, Toronto (Ontario), Canada M9W 1R3 (détentrice des droits d'auteur). La CSA décline toute responsabilité quant à la façon dont la matière est présentée et quant à toute interprétation pouvant en découler. L'information reproduite pourrait ne pas être à jour. Pour plus de renseignements, communiquer avec la CSA International.

Spanish

Save record 2

Record 3 2000-03-07

English

Subject field(s)
  • Joining Processes (Metals)
DEF

An arc cutting process in which metals are severed by melting them with the heat of an arc between a carbon electrode and the base metal. [Definition standardized by the AWS.]

OBS

carbon arc cutting; CAC: term and abbreviation standardized by the American Welding Society (AWS).

OBS

carbon arc cutting; CAC: term and abbreviation standardized by the CSA International. Material reproduced with the permission of the copyright holder, the Canadian Standards Association (CSA), 178 Rexdale Blvd., Toronto, Ontario, Canada M9W 1R3. However, CSA shall not be responsible for the manner in which the information is presented, nor for any interpretations thereof. This CSA material may not have been updated to reflect amendments subsequently made to the original content. For further information, contact CSA International.

French

Domaine(s)
  • Assemblage des métaux
DEF

Procédé de coupage à l'arc dans lequel on utilise une électrode de carbone. [Définition normalisée par la CSA International.]

OBS

coupage à l'arc avec électrode de carbone; procédé CAC; coupage à l'arc au carbone : termes normalisés par la CSA International. Reproduit avec l'autorisation de l'Association canadienne de normalisation (CSA), 178, boul. Rexdale, Toronto (Ontario), Canada M9W 1R3 (détentrice des droits d'auteur). La CSA décline toute responsabilité quant à la façon dont la matière est présentée et quant à toute interprétation pouvant en découler. L'information reproduite pourrait ne pas être à jour. Pour plus de renseignements, communiquer avec la CSA International.

Spanish

Save record 3

Record 4 2000-02-25

English

Subject field(s)
  • Oxygen Cutting (Metals)
DEF

An arc cutting process in which metals to be cut are melted by the heat of a carbon arc and the molten metal is removed by a blast of air. [Definition standardized by the AWS.]

DEF

Thermal cutting using an arc for melting the metal and a stream of air to remove the molten metal to enable a cut to be made.

OBS

air carbon arc cutting; AAC: term and abbreviation standardized by the American Welding Society (AWS).

OBS

air carbon arc cutting; AAC: term and abbreviation standardized by the CSA International. Material reproduced with the permission of the copyright holder, the Canadian Standards Association (CSA), 178 Rexdale Blvd., Toronto, Ontario, Canada M9W 1R3. However, CSA shall not be responsible for the manner in which the information is presented, nor for any interpretations thereof. This CSA material may not have been updated to reflect amendments subsequently made to the original content. For further information, contact CSA International.

French

Domaine(s)
  • Oxycoupage
DEF

Cas particulier du coupage à l'arc, dans lequel on utilise une électrode de carbone et où l'évacuation des scories est assurée par un jet d'air.

OBS

Ce procédé est surtout utilisé pour effectuer des goujures.

OBS

coupage à l'arc avec électrode de carbone et jet d'air; procédé AAC; coupage air-arc au carbone : termes normalisés par la CSA International. Reproduit avec l'autorisation de l'Association canadienne de normalisation (CSA), 178, boul. Rexdale, Toronto (Ontario), Canada M9W 1R3 (détentrice des droits d'auteur). La CSA décline toute responsabilité quant à la façon dont la matière est présentée et quant à toute interprétation pouvant en découler. L'information reproduite pourrait ne pas être à jour. Pour plus de renseignements, communiquer avec la CSA International.

Spanish

Save record 4

Record 5 2000-02-17

English

Subject field(s)
  • Arc Welding
DEF

An arc welding process which produces coalescence of metals by heating them with an arc between a carbon electrode and the work. [Definition standardized by the AWS.]

OBS

carbon arc welding; CAW: term and abbreviation standardized by the American Welding Society (AWS).

OBS

carbon arc welding; CAW: term and abbreviation standardized by the CSA International. Material reproduced with the permission of the copyright holder, the Canadian Standards Association (CSA), 178 Rexdale Blvd., Toronto, Ontario, Canada M9W 1R3. However, CSA shall not be responsible for the manner in which the information is presented, nor for any interpretations thereof. This CSA material may not have been updated to reflect amendments subsequently made to the original content. For further information, contact CSA International.

French

Domaine(s)
  • Soudage à l'arc
DEF

Procédé de soudage à l'arc dans lequel on utilise une électrode de carbone, avec ou sans métal d'apport et sans protection extérieure. [Définition normalisée par la CSA International.]

OBS

soudage à l'arc avec électrode de carbone; procédé CAW : termes normalisés par la CSA International. Reproduit avec l'autorisation de l'Association canadienne de normalisation (CSA), 178, boul. Rexdale, Toronto (Ontario), Canada M9W 1R3 (détentrice des droits d'auteur). La CSA décline toute responsabilité quant à la façon dont la matière est présentée et quant à toute interprétation pouvant en découler. L'information reproduite pourrait ne pas être à jour. Pour plus de renseignements, communiquer avec la CSA International.

Spanish

Save record 5

Record 6 1997-02-26

English

Subject field(s)
  • Canadian General Standards Board (CGSB) Standards
OBS

Standard number: CAN/CGSB-4.2 18.1-M90

French

Domaine(s)
  • Normes de l'Office des normes générales du Canada (ONGC)
OBS

Numéro de norme : CAN/CGSB-4.2 18.1-M90

Spanish

Save record 6

Record 7 1988-08-09

English

Subject field(s)
  • Oxygen Cutting (Metals)

French

Domaine(s)
  • Oxycoupage
OBS

Pour renseignements complémentaires, consulter la fiche "coupage arc-air".

OBS

Terme accepté par le Comité des lexiques des métiers (Nouveau-Brunswick).

Spanish

Save record 7

Record 8 1986-04-09

English

Subject field(s)
  • Arc Welding

French

Domaine(s)
  • Soudage à l'arc
OBS

soudage

Spanish

Save record 8

Record 9 1986-04-09

English

Subject field(s)
  • Arc Welding
OBS

(souder)

French

Domaine(s)
  • Soudage à l'arc

Spanish

Save record 9

Record 10 1982-11-16

English

Subject field(s)
  • Arc Welding
OBS

Welding in which an arc is maintained between a nonconsumable carbon electrode and the work.

French

Domaine(s)
  • Soudage à l'arc
OBS

Soudage pendant lequel un arc est maintenu entre une électrode non consommable en carbone et la pièce à souder.

Spanish

Save record 10

Copyright notice for the TERMIUM Plus® data bank

© Public Services and Procurement Canada, 2026
TERMIUM Plus®, the Government of Canada's terminology and linguistic data bank
A product of the Translation Bureau

Features

GCtranslate (available on the Government of Canada network only)

Use this artificial intelligence prototype to translate Government of Canada content up to and including Protected B. Available to employees of selected departments and agencies only.

Writing tools

The Language Portal’s writing tools have a new look! Easy to consult, they give you access to a wealth of information that will help you write better in English and French.

Glossaries and vocabularies

Access Translation Bureau glossaries and vocabularies.

Date Modified: